ACMOS 65/50 Grinding Coolant [Weinig 00.317.430] - ACMOS 65-50 is a Water soluble cooling lubricant for virtually all grinding work
ACMOSIT 65-50 contains fully synthetic active agents and anticorrosives. Guaranteed free from mineral oil and organic chlorine compounds. Besides, ACMOSIT 65-50 does not contain secondary amines.
ACMOSIT 65-50 contains a special inhibitor to prevent nitrosamine formation. Consequently it is not absolutely essential to change the working solution, if the limit value for nitrite is exceeded.
Highly soluble in water, forming a highly transparent grinding liquid. Highly effective not only with standard steels.
Provides particularly good protection against corrosion. Exceptional stability. No odour formation, no decomposition and very long periods of use.
No sticking or gumming up of guides, clamping tools or measuring equipment. Residues of ACMOSIT 65-50 can easily be washed off with water.
ACMOSIT 65-50 is essentially non-foaming and therefore suitable for all grinding jobs.
APPLICATION:
3-5% in water, depending on the application.
ACMOS 65-50 Water-soluble cooling lubricant for virtually all grinding work
ACMOSIT 65-50 contains fully synthetic active agents and anticorrosives. Guaranteed free from mineral oil and organic chlorine compounds. Besides, ACMOSIT 65-50 does not contain secondary amines.
ACMOSIT 65-50 contains a special inhibitor to prevent nitrosamine formation. Consequently it is not absolutely essential to change the working solution, if the limit value for nitrite is exceeded.
Highly soluble in water, forming a highly transparent grinding liquid. Highly effective not only with standard steels.
Provides particularly good protection against corrosion. Exceptional stability. No odour formation, no decomposition and very long periods of use.
No sticking or gumming up of guides, clamping tools or measuring equipment. Residues of ACMOSIT 65-50 can easily be washed off with water.
ACMOSIT 65-50 is essentially non-foaming and therefore suitable for all grinding jobs.
APPLICATION:
3-5% in water, depending on the application.
CMT part no:552-570CS
D70 I50 M14 Max 14000
Diamond dry bit for milling, enlarging, shaping, countersinking on existing holes in: tile (ceramic, gres, etc.), hard stone (granite, marble, etc.), artifical stone (Okite?, Silestone?, etc.).
Use on other masonry materials is possible, but will reduce tool life. It can also be used to create lateral semicircular recesses (for cables, pipes, etc.).
Do not use for drilling.
TIPS:
For use with angle grinders (direct connection) or electric drills (with adaptor).
Max 14000 RPM.
Water cooling can extend tool life.
SAFETY WARNINGS:
Before use, read all warnings in machine manual.
CMT part no:552-535CS
D35 I30 M14 Max 14000
TAPERED BIT DP FOR GRES/MARBLE
552CS
Diamond dry bit for milling, enlarging, shaping, countersinking on existing holes in: tile (ceramic, gres, etc.), hard stone (granite, marble, etc.), artifical stone (Okite?, Silestone?, etc.).
Use on other masonry materials is possible, but will reduce tool life. It can also be used to create lateral semicircular recesses (for cables, pipes, etc.).
Do not use for drilling.
TIPS:
For use with angle grinders (direct connection) or electric drills (with adaptor).
Max 14000 RPM.
Water cooling can extend tool life.
SAFETY WARNINGS:
Before use, read all warnings in machine manual.
Diamond Grinding Wheel for Wadkin NQ straight knife planer blade grinder
Diamond Grinding Wheel for sharpening and grinding TCT planer blades
D = 150
H = 70
d = 22.2
ACMOS 65/50 Grinding Coolant [Weinig 00.317.430] - ACMOS 65-50 is a Water soluble cooling lubricant for virtually all grinding work ACMOSIT 65-50 contains fully synthetic active agents and anticorrosives. Guaranteed free from mineral oil and organic chlorine compounds. Besides, ACMOSIT 65-50 does not contain secondary amines. ACMOSIT 65-50 contains a special inhibitor to prevent nitrosamine formation. Consequently it is not absolutely essential to change the working solution, if the limit value for nitrite is exceeded. Highly soluble in water, forming a highly transparent grinding liquid. Highly effective not only with standard steels. Provides particularly good protection against corrosion. Exceptional stability. No odour formation, no decomposition and very long periods of use. No sticking or gumming up of guides, clamping tools or measuring equipment. Residues of ACMOSIT 65-50 can easily be washed off with water. ACMOSIT 65-50 is essentially non-foaming and therefore suitable for all grinding jobs. APPLICATION: 3-5% in water, depending on the application.In StockList £278.40£203.00Inc Vat £243.60
ACMOS 65-50 Water-soluble cooling lubricant for virtually all grinding work ACMOSIT 65-50 contains fully synthetic active agents and anticorrosives. Guaranteed free from mineral oil and organic chlorine compounds. Besides, ACMOSIT 65-50 does not contain secondary amines. ACMOSIT 65-50 contains a special inhibitor to prevent nitrosamine formation. Consequently it is not absolutely essential to change the working solution, if the limit value for nitrite is exceeded. Highly soluble in water, forming a highly transparent grinding liquid. Highly effective not only with standard steels. Provides particularly good protection against corrosion. Exceptional stability. No odour formation, no decomposition and very long periods of use. No sticking or gumming up of guides, clamping tools or measuring equipment. Residues of ACMOSIT 65-50 can easily be washed off with water. ACMOSIT 65-50 is essentially non-foaming and therefore suitable for all grinding jobs. APPLICATION: 3-5% in water, depending on the application.In StockList £181.20£140.00Inc Vat £168.00
CMT part no:552-570CS D70 I50 M14 Max 14000 Diamond dry bit for milling, enlarging, shaping, countersinking on existing holes in: tile (ceramic, gres, etc.), hard stone (granite, marble, etc.), artifical stone (Okite?, Silestone?, etc.). Use on other masonry materials is possible, but will reduce tool life. It can also be used to create lateral semicircular recesses (for cables, pipes, etc.). Do not use for drilling. TIPS: For use with angle grinders (direct connection) or electric drills (with adaptor). Max 14000 RPM. Water cooling can extend tool life. SAFETY WARNINGS: Before use, read all warnings in machine manual.Lead Time: 18 DaysList £170.40£101.00Inc Vat £121.20
CMT part no:552-535CS D35 I30 M14 Max 14000 TAPERED BIT DP FOR GRES/MARBLE 552CS Diamond dry bit for milling, enlarging, shaping, countersinking on existing holes in: tile (ceramic, gres, etc.), hard stone (granite, marble, etc.), artifical stone (Okite?, Silestone?, etc.). Use on other masonry materials is possible, but will reduce tool life. It can also be used to create lateral semicircular recesses (for cables, pipes, etc.). Do not use for drilling. TIPS: For use with angle grinders (direct connection) or electric drills (with adaptor). Max 14000 RPM. Water cooling can extend tool life. SAFETY WARNINGS: Before use, read all warnings in machine manual.Lead Time: 18 DaysList £84.00£51.00Inc Vat £61.20
3 mm square Diamond grinding wheel for Wadkin Profile Grinder D = 230 d = 31.75 mm [1 1/4"]Lead Time: 21 Days£190.00£228.00
5 mm square Diamond grinding wheel for Wadkin Profile Grinder D = 230 d = 31.75 mm [1 1/4"]In Stock£220.00£264.00
Diamond Grinding Wheel for Wadkin NQ Grinder D = 150 H = 70 d = 22Lead Time: 15 Days£168.00£201.60
Diamond Grinding Wheel for Wadkin NQ straight knife planer blade grinder Diamond Grinding Wheel for sharpening and grinding TCT planer blades D = 150 H = 70 d = 22.2Lead Time: 6 Days£194.00£232.80
