CMT part no:CMT792
Magnetic Planer Knife Setting Gauge - The best knives won't perform well unless they are properly set and aligned. The built-in permanent magnets grip both the planer block and the knives while you use the integral adjustments to get the knives into perfect position - adjustable in 0.1mm increments.
1. Magnetic ceramic stop
2. Joints with magnetic connectors
3. Precision depth stop with 0.1mm increments
To suit cutterblock diameter 65 - 130mm
The set is supplied in a wooden box with 2 setters
Three options for setting of knives:
Positioning onto the toolholder body with marking onto the original knife; Positioning onto the toolholder body setting with one of the supplied gauges; Positioning directly onto the machine table and the toolholder body.
The new TX Planer guard can be fitted on any planer up to 650 mm wide, as the guard is mounted on the take off table but are unsuited to machines with swing away top beds
The bridge is hinged to reduce the room occupied near the operator (according to EC standards the machine guard should not occupy, more than 500 mm for surface planers and 550 mm for combined surface and thickness).
Edge planing (fig. 2):
loosen knob D and pull guard bridge out just enough to uncover just enough of teh cutter block. Always use a push stick.
Flat planing (fig. 3):
to plane a workpieces main surface, lift guard bridge upon knob E a little above workpiece thickness so to allow its passage underneath while pushing it forward with one hand and pressing it on worktable with the other one. After each pass bring workpiece back to start position passing it above the bridge that will first lower onto worktable surface then rise again up to the position previously set.
.
During use the guard moves up and down parallel to worktable. With planing shafts longer than 450 mm it is advisable to use a hinged version of the bridge to limit the room occupied near the operator (according to EC standards machine provided with ancillary equipment should not occupy, in addition to its proper dimensions, more space than 500 mm for surface planers and 550 mm for combined surface and thickness planers).
Always use a push stick.
The automatic guard for planing machines up to 650mm wide.
The TX MATIC is designed to automatically cover the planer cutter block and be very simple use. The wheel unit at the end of the aluminium bridge can be rotated in three positions on a pivot. When positioning the wheels vertically, the force of pushing the workpiece, the bridge lifts automatically to a maximum height of 75mm (in compliance with the EC standards), after the piece has passed, it returns to a safe position on the table.
When working with the piece rested against the guide, the wheels must be positioned horizontally: in this case, the force of pushing the workpiece, moves the bridge away from the fence (up to a max. travel of 100mm), and returns to the origin after the work has passed.
It is also possible to use the position of the wheels at 45 degrees with the guide inclined at 45 degrees for chamfer & bevel work.
iTECH Bridge Planing Guard
To suit cutterblock width 310mm
Sprung guard mounted on side of outfeed table to give protection over cutterblock
Mouting position on outfeed table approx 445m from cutterblock centre
iTECH Bridge Planing Guard
To suit cutterblock width 410mm
Length of arm to ctr of bridge guard 580mm
Sprung guard mounted on side of outfeed table to give protection over cutterblock
Panhans 1533 Magnetic Planer Setting Gauge
Perfect planing results do not only require well sharpened planer knives but also their exact setting. For adjustment of the planer knives practical experiance and corresponding time was needed.
The device has been designed with permanent magents which adheres to the cutter block and not the knife, so that both hands are free for setting and tightening the knives. The setting devices don't need to be held down any more.
The knive projection may always be exactly set due to the adjustable stops 0.1mm adjustments.
Will suit steel shaft diameters from 80-145mm
The SUVAmatic planer guard offers a elegantly engineered, safe system for upgrading the cutter block guard when planing timber. The precision construction and design makes the guard a pleasure to use.
Practical workpiece guiding system -
The workpiece is guided by a pressure pad and a guide for the workpiece - Both are fitted to the tip of the guard. The latter can be tilted to guide the workpiece both for flatening and edging (Fig. 1 and 2).
Pressure application to assist work -
When edging, the spring loaded guard exerts pressure in direction of the fence. After edging, it automatically covers the full length of the cutterblock in front of the fence.
Automatic lifting and lowering of the cutterblock guard
___________________________________________
When surfacing, the cutterblock guard is lifted and guided over the wood by the guide. After surfacing it lowers itself automatically to cover the cutterblock.
Guard can be locked in position for batch jobs
_________________________________________
When doing batch jobs, the cutterblock guard can be locked in vertical position to just accommodate the thickness of the workpiece. The cutterblock guard will return automatically to this preset position after being pressed down. (Fig. 3).
Can be fitted to all planers
_________________
The cutterbiock guard can be fitted to all surface planing machines and surface planing / thicknessing machines ask about specific fitting kit for your exisitng planer.
Satisfies the CEN draft standard.
Price subject to machine width and mounting requirements
3D Pushblock: Ultimate Safety and Precision for Table Saws, Router Tables, Bandsaws & Jointers.
The 3D Pushblock is engineered to provide advanced protection and precision for woodworkers using table saws, bandsaws, router tables, and jointers. This innovative pushblock delivers exceptional control, allowing for safe, precise, and stable cuts, even with small workpieces. Designed to significantly reduce kickback and provide superior hand protection, the iTECH 3D Pushblock ensures safety without compromising performance.
Features:
3-Directional Control: Provides simultaneous downward, inward, and forward pressure for enhanced safety and control.
Downward Pressure: Prevents kickback and keeps the workpiece firmly in place.
Inward Pressure: Keeps the material securely pressed against the fence for accurate cuts.
Forward Pressure: Reduces the risk of burning and ensures smooth material feeding through the blade.
Moving-Blade-Guard Hand Protection: Protects the user's hands by covering the cutting area, enhancing safety during operation.
Precise 1/4" Thin Rips: Capable of performing precise cuts as thin as 1/4" without the need for frequent fence adjustments.
Versatile Application: Suitable for use with small stock on a variety of woodworking machines, including table saws, router tables, jointers, and bandsaws.
Adjustable Centre Leg: The centre leg is fully adjustable, allowing the user to accommodate different material sizes and widths. This feature provides increased versatility and ensures a secure grip on wood, aluminium, plastics, and other materials.
Stabilizing Balance Support: Integrated balance support stabilizes cuts, allowing for accurate handling of small parts, making it ideal for intricate projects.
Precision and Control:
The iTECH 3D Pushblock is essential for those seeking maximum precision in their woodworking projects. With its built-in balance support and three-directional pressure, users can confidently make accurate cuts with complete control. The pushblock provides a firm grip on workpieces, minimizing movement during cutting and virtually eliminating kickback.
Full Adjustability and Comfort:
The iTECH 3D Pushblock is designed for ease of use, featuring an adjustable handle that can be angled for comfort. Its fully customizable design ensures maximum user control, making it a flexible solution for various applications in woodworking. Whether working with small stock or larger materials, the pushblock's adjustable centre leg and gripping surface provide superior versatility.
Safety Considerations:
The iTECH 3D Pushblock is designed to enhance user safety and should always be used in conjunction with appropriate machine guards and safety protocols. It is not intended as a replacement for standard machine safety features but rather as an additional safety layer. Always follow local health and safety regulations while using this product.
Hardware Updates:
Please note there have been updates to the parts and hardware list. Refer to the provided insert for the latest assembly instructions, including revisions to Step 2 (page 9) of the assembly manual.
Important Usage Notes:
The 3D Pushblock should complement the existing machine guards, not replace them.
Always follow proper safety practices as outlined in the manual and those applicable to your local regulations.
Package Contents:
1 x 3D Pushblock Unit
Adjustable Centre Leg
Instruction Manual
Updated Hardware Insert
Dimensions:
Length: 225 mm
Width: 100 mm
Height: 80 mm
Weight: 0.8 kg
Materials:
High-Durability Composite Plastic
Anti-Slip Grip Material
Compatible Machines:
Table Saws
Router Tables
Bandsaws
Jointers
Warranty:
1-Year Manufacturer Warranty against defects
Shipping Information:
Shipping Weight: 1 kg
Shipping Dimensions: 250 mm x 120 mm x 90 mm
Delivery Time: 3-5 Business Days
CMT part no:CMT792 Magnetic Planer Knife Setting Gauge - The best knives won't perform well unless they are properly set and aligned. The built-in permanent magnets grip both the planer block and the knives while you use the integral adjustments to get the knives into perfect position - adjustable in 0.1mm increments. 1. Magnetic ceramic stop 2. Joints with magnetic connectors 3. Precision depth stop with 0.1mm increments To suit cutterblock diameter 65 - 130mm The set is supplied in a wooden box with 2 setters Three options for setting of knives: Positioning onto the toolholder body with marking onto the original knife; Positioning onto the toolholder body setting with one of the supplied gauges; Positioning directly onto the machine table and the toolholder body.In StockList £118.80£85.00Inc Vat £102.00
The new TX Planer guard can be fitted on any planer up to 650 mm wide, as the guard is mounted on the take off table but are unsuited to machines with swing away top beds The bridge is hinged to reduce the room occupied near the operator (according to EC standards the machine guard should not occupy, more than 500 mm for surface planers and 550 mm for combined surface and thickness). Edge planing (fig. 2): loosen knob D and pull guard bridge out just enough to uncover just enough of teh cutter block. Always use a push stick. Flat planing (fig. 3): to plane a workpieces main surface, lift guard bridge upon knob E a little above workpiece thickness so to allow its passage underneath while pushing it forward with one hand and pressing it on worktable with the other one. After each pass bring workpiece back to start position passing it above the bridge that will first lower onto worktable surface then rise again up to the position previously set. . During use the guard moves up and down parallel to worktable. With planing shafts longer than 450 mm it is advisable to use a hinged version of the bridge to limit the room occupied near the operator (according to EC standards machine provided with ancillary equipment should not occupy, in addition to its proper dimensions, more space than 500 mm for surface planers and 550 mm for combined surface and thickness planers). Always use a push stick.In StockList £566.40£417.00Inc Vat £500.40
The automatic guard for planing machines up to 650mm wide. The TX MATIC is designed to automatically cover the planer cutter block and be very simple use. The wheel unit at the end of the aluminium bridge can be rotated in three positions on a pivot. When positioning the wheels vertically, the force of pushing the workpiece, the bridge lifts automatically to a maximum height of 75mm (in compliance with the EC standards), after the piece has passed, it returns to a safe position on the table. When working with the piece rested against the guide, the wheels must be positioned horizontally: in this case, the force of pushing the workpiece, moves the bridge away from the fence (up to a max. travel of 100mm), and returns to the origin after the work has passed. It is also possible to use the position of the wheels at 45 degrees with the guide inclined at 45 degrees for chamfer & bevel work.In Stock£970.00£1,164.00
Panhans 1533 Magnetic Planer Setting Gauge Perfect planing results do not only require well sharpened planer knives but also their exact setting. For adjustment of the planer knives practical experiance and corresponding time was needed. The device has been designed with permanent magents which adheres to the cutter block and not the knife, so that both hands are free for setting and tightening the knives. The setting devices don't need to be held down any more. The knive projection may always be exactly set due to the adjustable stops 0.1mm adjustments. Will suit steel shaft diameters from 80-145mmLead Time: 136 DaysList £328.80£199.00Inc Vat £238.80
The SUVAmatic planer guard offers a elegantly engineered, safe system for upgrading the cutter block guard when planing timber. The precision construction and design makes the guard a pleasure to use. Practical workpiece guiding system - The workpiece is guided by a pressure pad and a guide for the workpiece - Both are fitted to the tip of the guard. The latter can be tilted to guide the workpiece both for flatening and edging (Fig. 1 and 2). Pressure application to assist work - When edging, the spring loaded guard exerts pressure in direction of the fence. After edging, it automatically covers the full length of the cutterblock in front of the fence. Automatic lifting and lowering of the cutterblock guard ___________________________________________ When surfacing, the cutterblock guard is lifted and guided over the wood by the guide. After surfacing it lowers itself automatically to cover the cutterblock. Guard can be locked in position for batch jobs _________________________________________ When doing batch jobs, the cutterblock guard can be locked in vertical position to just accommodate the thickness of the workpiece. The cutterblock guard will return automatically to this preset position after being pressed down. (Fig. 3). Can be fitted to all planers _________________ The cutterbiock guard can be fitted to all surface planing machines and surface planing / thicknessing machines ask about specific fitting kit for your exisitng planer. Satisfies the CEN draft standard. Price subject to machine width and mounting requirementsLead Time: 41 Days£ Enquire
3D Pushblock: Ultimate Safety and Precision for Table Saws, Router Tables, Bandsaws & Jointers. The 3D Pushblock is engineered to provide advanced protection and precision for woodworkers using table saws, bandsaws, router tables, and jointers. This innovative pushblock delivers exceptional control, allowing for safe, precise, and stable cuts, even with small workpieces. Designed to significantly reduce kickback and provide superior hand protection, the iTECH 3D Pushblock ensures safety without compromising performance. Features: 3-Directional Control: Provides simultaneous downward, inward, and forward pressure for enhanced safety and control. Downward Pressure: Prevents kickback and keeps the workpiece firmly in place. Inward Pressure: Keeps the material securely pressed against the fence for accurate cuts. Forward Pressure: Reduces the risk of burning and ensures smooth material feeding through the blade. Moving-Blade-Guard Hand Protection: Protects the user's hands by covering the cutting area, enhancing safety during operation. Precise 1/4" Thin Rips: Capable of performing precise cuts as thin as 1/4" without the need for frequent fence adjustments. Versatile Application: Suitable for use with small stock on a variety of woodworking machines, including table saws, router tables, jointers, and bandsaws. Adjustable Centre Leg: The centre leg is fully adjustable, allowing the user to accommodate different material sizes and widths. This feature provides increased versatility and ensures a secure grip on wood, aluminium, plastics, and other materials. Stabilizing Balance Support: Integrated balance support stabilizes cuts, allowing for accurate handling of small parts, making it ideal for intricate projects. Precision and Control: The iTECH 3D Pushblock is essential for those seeking maximum precision in their woodworking projects. With its built-in balance support and three-directional pressure, users can confidently make accurate cuts with complete control. The pushblock provides a firm grip on workpieces, minimizing movement during cutting and virtually eliminating kickback. Full Adjustability and Comfort: The iTECH 3D Pushblock is designed for ease of use, featuring an adjustable handle that can be angled for comfort. Its fully customizable design ensures maximum user control, making it a flexible solution for various applications in woodworking. Whether working with small stock or larger materials, the pushblock's adjustable centre leg and gripping surface provide superior versatility. Safety Considerations: The iTECH 3D Pushblock is designed to enhance user safety and should always be used in conjunction with appropriate machine guards and safety protocols. It is not intended as a replacement for standard machine safety features but rather as an additional safety layer. Always follow local health and safety regulations while using this product. Hardware Updates: Please note there have been updates to the parts and hardware list. Refer to the provided insert for the latest assembly instructions, including revisions to Step 2 (page 9) of the assembly manual. Important Usage Notes: The 3D Pushblock should complement the existing machine guards, not replace them. Always follow proper safety practices as outlined in the manual and those applicable to your local regulations. Package Contents: 1 x 3D Pushblock Unit Adjustable Centre Leg Instruction Manual Updated Hardware Insert Dimensions: Length: 225 mm Width: 100 mm Height: 80 mm Weight: 0.8 kg Materials: High-Durability Composite Plastic Anti-Slip Grip Material Compatible Machines: Table Saws Router Tables Bandsaws Jointers Warranty: 1-Year Manufacturer Warranty against defects Shipping Information: Shipping Weight: 1 kg Shipping Dimensions: 250 mm x 120 mm x 90 mm Delivery Time: 3-5 Business DaysIn Stock
