Casadei Industria Alu Bender for ACM & Honeycomb

The Casadei Alu Bender is a special application machine for finishing and bending the edges of aluminium composite materials. It is a high performance through feed machine.

The machine mills one of the two skins and the core till it reaches the face skin to be bent.Then, during feeding, 10 bending rollers bend the main skin against the core by closing and hiding it also protecting the core from atmospheric agents.

This machine has been designed to obtain the best performance and productivity processing alu composites materials: ACM - ACP - Alucobond? - Alpolic? - Dibond? - Larson? - Reynobond? - Alubond? - Albond? etc as well as on honeycomb aluminium panels.

After the bending operation it is possible to have a flush trim unit which can bevel at 15° or at radius 2 mm, panels which have both sharp corners such as Acrylics etc.

The Alu Bender is equipped with a front extension support to help when feeding large panels. It is equipped with powerful high frequency motors, the Alu Bender works automatically with very little maintenance. A centralised extraction connection helps to eliminate swarf and waste.

The Alu Bender is:
- Equipped with three phase motors for the track feed and powerful high frequency motors, the Alu Bender carries out finishing work automatically with very little maintenance.

A cerntralised dust extraction connection eliminates swarf [with an optional dust collector unit]

With optional units it is possible mill HPL (TRESPA?, POLYREY?, RESOPAL?) to create overlap between panels and bevelling of sharp edges.

The machine functions are controlled by PLC with a 4 line display:
-ergonomic position for machine operator
-control of working programmes
-start-up control of motors on units
-control feed speed
-counting metre of processed panels divided in groups
-counting of working hours
-visualisation of emergency messages
Casadei logo
  • approximate lead time: 60 days
  • Part Number: CSALU
£ Enquire
Lease from only
£105.03 per week

Leasing plans are for
UK businesses only
and subject to status

Product Description
  • Panel height : min 3 - max 30 mm
  • Panel height (Alu Honeycomb): min 10 - max 20 mm
  • Panel WIDTH & Panel LENGTH min 110 - min.120 mm
  • Panel feeder variable speed: 2-8 m/min
  • Trimming motor STD : 200 Hz - 12.000 RPM - 0,50 KW
  • Trimming motor OPT : 200 Hz - 12.000 RPM - 0,73 KW
  • Carbide knives cutterhead : ¥ 80 mm Z10 - foro ¥ 16 mm
  • Total power load ca. : min. 1,5 KW - 2,5 kw
Additional Information
Additional Information
Part Number CSALU
Manufacturer Casadei

Write Your Own Review

You're reviewing: Casadei Industria Alu Bender for ACM & Honeycomb

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Your Rating