Casati TIO 900 Crosscut Guillotine
The Crosscutting Guillotine TIO 900 can be connected with the Guillotine in L-shape:
· front and back photocells
· two-hands control
· green cutting edge line light
· EC conformity
· maintenance book and service tools
welded steel made, highly ribbed to ensure best stiffness. An originalk device with levers and slides, driving the working movement of the knife beam, assures accurate straightness of the cutting line.
The machine includes a pressue beam with torsion bar.
It cuts with a shearing action (motion with tangential component from one side to another)
the machine is equipped with a control panel, mounted on the front side of the lower frame.
It includes the two-hands control for the working movement of the clamping beam and the knife beam.
it is automatic. By pressing contemporaneously two push-buttons on the control panel, you have in sequence the coming down of the pressure beam, the cutting, the coming up of the pressure beam.
the electrical system, both on the machine and in the box, is complying with IEC Standards and CEI safety rules.
it includes a tank with pump motor of 4.1 kW, pressure relief valve, distribution solenoid valves. A check valve stops the accidental down stroke of the knife beam.
central system of lubrication. By pulling up the lever of the oil is pushed to all the point in the machine requiring lubrication.
Safety and work environment:
safety photocells stop the working cycle, when their ray is interrupted, and control the back movement to the upper start point of pressing beam and knife beam.
Two hands control.
A check valve prevents the down stroke of the knife beam also in case of accidental breaking of the oil pipe. The noice measurement is 70dB
The machine is manufacured accordingly with EC safety rule
it is made with special steel, entirely hardened.
White grey RAL 9018; dark grey RAL 7021
This machine may be connected to our longitudinal guillotines in "L" shape