Aigner Bowmould master shaping guard is a patented modular system that allows fast and safe machining on curved work. It can be used for either left hand or right hand machining and comes with infinitely adjustable infeed guide, dust shields suitable for tool diameters up to 150mm and suitable for either hand or power feed use. The unti features integrated dust and chip collection with dust spigot to rear.
Tools are easily visible through the transparent shield. The spring-loaded shield is used to adjust the necessary pressure on the workpiece.
Optional equipment:
Curved moulding stop, slips on the arbor to allow precise depth of moulding adjustment. Optional guide wheels can also be used for safe accurate guiding.
Features:
Fully adjustable guard brushes;
Brake shoe integrated in the starting strip which may be
swung through 90 degrees from its working position into its inoperative
position and vice versa. In both positions it is automatically locked, and ensures stopping of the starting ring.
Maximum tool diameter 220mm
The Aigner table extensions are part of the modular range of accessories. The basic table is 1100mm long and 170mm wide, and can be clipped on and off machines in seconds when not in use.
A range of optional rail lengths are available for mounting. With the use of a lionking clamp (AI212226000172), 2 units can be connected to give 2200mm support or multiple units can be mounted side by side for wider support.
These table extensions are ideal for bandsaws, shapers, spindle moulders, circular saws etc. The fold down leg locks into place and offers a wide range of height adjustment.
Useful additions such asthe optional back stroke protection make it an invaluable aid when producing 'stop mouldings'. Additionally, it supports other units such as CirQuick, Segmenter etc for cutting arcs and curves.
Features:
Solid table made of anodised aluminium
Weight 6kg
Shipping Dims 120 x 23 x 6cm
NOTE - Mounting rails should be purchased separately
Option to extend the length:AI212226000172 Aigner Coupling bracket to join 2 tables
Aigner Integral Fence System - 500mm infeed + 500mm outfeed
A beautifully engineered fence system with revolutionary features for safe and accurate setting on spindle moulders and shapers. On spindle moulders the opening in the tool area is always problematic. The Aigner integral fence provides a guiding area without any gap, by using an integrated set of fingers that can be swung across to provide continuous support. The fingers have micro adjustment in the vertical plane allowing them to give maximum support.
Additional safety, working, and support units can be mounted on to the integral fence. These include the flush fix, support rail, pressure module, filling bar and spreader. The anodised finish on the fence surfaces reduces friction and gives a wear resistant finish.
Features:
- Four versions available, making the fences suitable for most spindle moulders
- Mounting and adjusting can be done quickly and simply without additional tools
- Exact setting to tool diameter and tool height is possible thanks to continuous adjustability
Central fence mounting bolt can sit 45 - 80mm height from machine bed
FME Handheld Moisture Meter - for the professional in the wood industry
Fast and accurate measurement of 79 wood species and 8 construction materials.
The tool for the true professional in the woodworking and construction industry. The FME has the same sensor technology as the FMD-Plus assuring an accuracy of 0,2 %.
The FME calculates measurement data for
79 individual wood species
4 common wood groups
8 popular building materials like concrete, MDF or gypsum.
The internal memory can hold up to 50 measurements, through which you can scroll using the instrument's panel keys. Connect our optional temperature sensor for automatic temperature correction.
The standard kit includes
the FME Meter
A Hammer Probe
Assorted insulated and non-insulated pins
a manual and cabling
Optionally you can order
a Handgrip probe
a Reference resistor
an external temperature sensor to connect to the meter
CMT part no:CMT792
Magnetic Planer Knife Setting Gauge - The best knives won't perform well unless they are properly set and aligned. The built-in permanent magnets grip both the planer block and the knives while you use the integral adjustments to get the knives into perfect position - adjustable in 0.1mm increments.
1. Magnetic ceramic stop
2. Joints with magnetic connectors
3. Precision depth stop with 0.1mm increments
To suit cutterblock diameter 65 - 130mm
The set is supplied in a wooden box with 2 setters
Three options for setting of knives:
Positioning onto the toolholder body with marking onto the original knife; Positioning onto the toolholder body setting with one of the supplied gauges; Positioning directly onto the machine table and the toolholder body.
CMT part no:998.001.03
CMT Formula 2050 SAWBLADE & ROUTER BIT CLEANER
A safe and non toxic formula to break down resin on carbide and steel surfaces, thus allowing greater life between sharpenings.
Saw shops know how to get the most out of cutting tools. They know that the pitch and resin that wood leaves behind greatly shortens the useful life of carbide. We had several quality saw blade sharpeners across the country test our Formula 2050. "Phenomenal" and similar words were heard over and over about the performance of Formula 2050.
Most blade and bit cleaning products work with a disolving action. It takes some powerful and nasty chemicals to dissolve wood residues and adhesives. Our safe and non-toxic Formula 2050 penetrates the microscopic cracks in the resin and attacks the bond between it and the carbide or steel surfaces.
The resin releases its grip and you simply wipe it off. A clean cutting surface runs cooler and works less in the cut. The excess friction of a resin-coated blade causes heat build-up and carbide breakdown. Formula 2050 keeps your tools clean and helps you increase the life span between sharpenings and replacement. Can also be used in ultrasonic cleaning tanks
CMT part no:998.001.01
CMT FORMULA 2050 Blade & Router Bit Cleaner is a safe and non toxic formula to break down resin on carbide and steel surfaces, allowing greater life between sharpenings.
Saw shops know how to get the most out of cutting tools. They know that the pitch and resin that wood leaves behind greatly shortens the useful life of carbide. We had several quality saw blade sharpeners across the country test our Formula 2050. "Phenomenal" and similar words were heard over and over about the performance of Formula 2050.
Most blade and bit cleaning products work with a disolving action. It takes some powerful and nasty chemicals to dissolve wood residues and adhesives. Our safe and non-toxic Formula 2050 penetrates the microscopic cracks in the resin and attacks the bond between it and the carbide or steel surfaces.
The resin releases its grip and you simply wipe it off. A clean cutting surface runs cooler and works less in the cut. The excess friction of a resin-coated blade causes heat build-up and carbide breakdown. Formula 2050 keeps your tools clean and helps you increase the life span between sharpenings and replacement. Can also be used in ultrasonic cleaning tanks
Available in 2 sizes - 500ml spray or 3780ml Can
CMT part no:998.002.03
This new CMT Lubricant Spray For Wood - Neutralises resin, preventing it from inhibiting the feeding of timber over machine beds. The anti corrosive properties, give excellent performance against humidity and bed rust
5L Bulk can
CMT part no:DET-001
Attach this trimmer to your workpiece, press both ends against the board for a cutting range between 13mm (1/2") and 25mm (1"), move the trimmer in the correct direction indicated by the arrow. This will cut on both sides easily. The first cutter will cut straight, the second one can be adjusted for a chamfer cut.
Both cutters are made from high-quality hardened steel and can be easily replaced when worn out [ Part no CMDET001K]
suitable for up to 0.6mm edging
CMT part no:CMT334-4595
The innovative CMT334 Universal Hinge Boring Head employs three spindles which allow you to bore the holes for all of the major hinge brands. The head can be utilized on boring and point to point machines.
Options to consider:
BORING BITS TO SUIT:
cm39335011 Dia. 35mm x 38.5mm (r-hand)
cm39308012 Dowel drill dia.8mm x 38.5mm (l-hand)
CMT part no:TMP-1200
The CMT flexible template is a guide strip for that can be curved and formed to use on spindle moulders & routers. It is easy to use - just screw it on to any kind of wooden panel, MDF or chipboard for creating you forms, arcs and curved elements. The flexible strip template is fixed plate with countersunk screws. The CMT flexible template is made of a highly-resistant flexible plastic, which can be tied in knots without any risk of ruining or reducing flexibility.
Screw your template to the edge of the panel and follow its shape and rout the border on the guide ring. The template is suitable for manual feed on routers, router tables and spindle moulders. Rout easily, safely and accurately to make multiple forms such as arcs, curved elements and cut-out forms. Mark the edge of your form precisely and screw it onto a previously-placed panel from underneath.
If you rout with a guide ring mounted onto your spindle moulder, keep your hands a safe distance behind the template. Two different profiles in three lengths are available. Please notice that the smallest profile features a short radius, whereas the larger profile features a larger opening in case of flat and long curves.
CMT part no:TMP-2000
The CMT flexible template is a guide strip for that can be curved and formed to use on spindle moulders & routers. It is easy to use - just screw it on to any kind of wooden panel, MDF or chipboard for creating you forms, arcs and curved elements. The flexible strip template is fixed plate with countersunk screws. The CMT flexible template is made of a highly-resistant flexible plastic, which can be tied in knots without any risk of ruining or reducing flexibility.
Screw your template to the edge of the panel and follow its shape and rout the border on the guide ring. The template is suitable for manual feed on routers, router tables and spindle moulders. Rout easily, safely and accurately to make multiple forms such as arcs, curved elements and cut-out forms. Mark the edge of your form precisely and screw it onto a previously-placed panel from underneath.
If you rout with a guide ring mounted onto your spindle moulder, keep your hands a safe distance behind the template. Two different profiles in three lengths are available. Please notice that the smallest profile features a short radius, whereas the larger profile features a larger opening in case of flat and long curves.
CMT part no:CMT650
Perfect joints on kitchen worktops from 420mm to 650mm width.
The CMT650 is designed to cut kitchen worktop joints with any type of router. Letter code system for different operations makes the jig work much easier and very quick.
JIG INCLUDES:
-1 x phenolic template;
-3 x zinc-coated steel location bush;
-1 x adjustable end stop;
-1 x instruction manual.
JIG REQUIRES:
-a portable router;
-a ¥30mm guide bush;
-a ¥12mm TCT straight bit;
-two clamps.
CMT650 IS DESIGNED FOR ¥12MM STRAIGHT BITS:
-template made of stable and hardened material;
-for 45 degrees and 90 degrees joints;
-integrated templates for rounding over and chamfering edges;
-extra location bush for the worktop width of 600mm;
-two integrated templates for panel bolt recesses;
-delivered with a clear and comprehensive instruction manual.
CMT part no:183-HSK
A new universal assembly support system for setting your tools in HSK-F63 tool holders. The innovation lies in the special bi-directional roller bearings which clamp the tool holder to the flange. This unique system offers maximum protection to the tool taper and clamps are no longer needed
D=63mm
Polycarbonate table saw guard - Complete with riving-knife:
The Alfa saw guard is designed to fit on riving knives of all types of circular saw bench with a blade diameter from 250 to 315 mm. The guard is supplied complete with a standard 2.8mm riving knife for most applications.
This guard is has an intergral 60mm exhaust outlet and deflector for better chip flow. A groove in the front of the guard indicates the cutting line and the special design for the front of the guard allows the guard to be set low accommodating variance in material thickness.
Includes FREE push stick.
This protection hood can be fitted on the riving-knife in two different positions according to blade diameter: 250mm and 300mm.
2.8MM riving knife
Koala Spindle Moulder Ring Fence: This device allows you to guard and machine curved and circular work pieces whilst giving good visibility and protection. The guard can be fitted on all professional spindle moulders and shapers with a max. spindle diameter of 50mm and will accommodate tools upto 180mm diameter. The milling depth is easily set by the micro adjustment knob to give accurate finished dimensions. The aluminium infeed guide and workpiece clamp , are both adjustable in height parallel to worktable.
Both suction pipe no.4 @120mm and fence no.6 can be fitted either on the left or on the right hand side of this guard according to spindle rotation or specific working requirements.
Approx weight 12kg
Tapoa Spindle Moulder Ring Fence:
This device allows you to guard and machine curved and circular work pieces whilst giving good visibility and protection. The guard can be fitted on all professional spindle mouders and shapers with a max. spindle diameter of 50mm and will accomodate tools upto 160mm diameter.
The milling depth is easily set by the micro adjustment knob [no. 3] to give accurate finished dimensions. The aluminium infeed guide [no. 1] and workpiece clamp [no. 2], are both adjustable in height parallel to worktable.
Both suction pipe no.4 @120mm and fence [no.6] can be fitted either on the left or on the right hand side of this guard according to spindle rotation or specific working requirements.
The new TX Planer guard can be fitted on any planer up to 650 mm wide, as the guard is mounted on the take off table but are unsuited to machines with swing away top beds
The bridge is hinged to reduce the room occupied near the operator (according to EC standards the machine guard should not occupy, more than 500 mm for surface planers and 550 mm for combined surface and thickness).
Edge planing (fig. 2):
loosen knob D and pull guard bridge out just enough to uncover just enough of teh cutter block. Always use a push stick.
Flat planing (fig. 3):
to plane a workpieces main surface, lift guard bridge upon knob E a little above workpiece thickness so to allow its passage underneath while pushing it forward with one hand and pressing it on worktable with the other one. After each pass bring workpiece back to start position passing it above the bridge that will first lower onto worktable surface then rise again up to the position previously set.
.
During use the guard moves up and down parallel to worktable. With planing shafts longer than 450 mm it is advisable to use a hinged version of the bridge to limit the room occupied near the operator (according to EC standards machine provided with ancillary equipment should not occupy, in addition to its proper dimensions, more space than 500 mm for surface planers and 550 mm for combined surface and thickness planers).
Always use a push stick.
The 2m Flipstop is a simple Measuring stop system which saves time, money and materials.
It can be used on most types of machines to provide accurate, repeatable machining operations easily and quickly.
It is cost effective to install, simple to use, saves the time and effort of measuring and marking.
Features:
FLIPSTOP consists of a metal track with measuring scale which is fitted to a fence. Pivoting stops are moved along the track to the required position. When not in use the stop is simply flipped up out of the way. A number of stops can be fitted onto the track which makes it possible to keep multiple settings on a single unit and simply to 'flip' between settings with no further adjustments.
Highly versatile,
FLIPSTOP is simply screwed to a 45mm high fence on the machine. The FLIPSTOP track is available in 1 m, 2m or 3m lengths. It can be fitted with left or right reading measuring scales
Accurate, repeatable and fast
FLIPSTOP is designed to ease accurate measuring and to give consistently repeatable results. This makes it ideal for precision work as well as for volume production where speed of throughput are important.
Standard FLIPSTOP set Comprises:
One length of track, two stops, two self adhesive scales, fixing screws, allen key and instructions.
The 3m Flipstop is a simple Measuring stop system which saves time, money and materials.
It can be used on most types of machines to provide accurate, repeatable machining operations easily and quickly.
It is cost effective to install, simple to use, saves the time and effort of measuring and marking.
FLIPSTOP consists of a metal track with measuring scale which is fitted to a fence. Pivoting stops are moved along the track to the required position. When not in use the stop is simply flipped up out of the way. A number of stops can be fitted onto the track which makes it possible to keep multiple settings on a single unit and simply to 'flip' between settings with no further adjustments.
Highly versatile,
FLIPSTOP is simply screwed to a 45mm high fence on the machine. The FLIPSTOP track is available in 1 m, 2m or 3m lengths. It can be fitted with left or right reading measuring scales
Accurate, repeatable and fast
FLIPSTOP is designed to ease accurate measuring and to give consistently repeatable results. This makes it ideal for precision work as well as for volume production where speed of throughput are important.
Standard FLIPSTOP set Comprises:
One length of track, two stops, two self adhesive scales, fixing screws, allen key and instructions.
3.0m Length of heavy duty industrial quality PU flexible dust extraction hose pipe. This flexi hose is abrasion resistant and especially suitable for woodworking machines.
L=3000 mm
3.0m Length of heavy duty industrial quality PU flexible dust extraction hose pipe. This flexi hose is abrasion resistant and especially suitable for woodworking machines.
L=3000 mm
3.0m Length of heavy duty industrial quality PU flexible dust extraction hose pipe. This flexi hose is abrasion resistant and especially suitable for woodworking machines.
L=3000 mm
The IDT5 is a red line laser specifically designed for
industrial applications, with a strong anodised
aluminium housing that protects the laser diode. It's
built with components of the highest quality to ensure
an extended working life, and is covered by a 30-month warranty.
The IDT5 has standard power outputs of 20 mW. It projects a fine, visible red line 5-8m, that simulates the cutting line and helps with the accurate positioning of material. The available voltages are 85-265 Vac
The state-of-the-art design and construction of the
IDT5 guarantees a perfect temperature stability,
without the need for further cooling systems.
The IDT5 is a reliable laser with a proven track
record, capable of withstanding the most challenging
work conditions.
supplied complete with mounting bracket.
Size
Length 200 mm
Diameter 50 mm
Protection IP 67
Input Voltage 85-265 VAC or 12-24 VDC
Operating current Imax 90-110-130
Operating temperature -15 to +55 degreesC
Storage temperature -40 to +85 degreesC
Wavelength 635 nm
Housing Red anodised aluminium
Safety Class 2M
Klueber ALTEMP Q NB 50 is a white/beige lubricating paste containing a mineral base oil, a barium complex soap and inorganic solid lubricants.
Benefits for your application
Low lubricant costs for initial and relubrication due to long service life of water- and media-resistant product.
Good wear and corrosion protection helps reduce assembly forces and screw torques and prevents tribo- and fretting corrosion
High pressure absorption capacity enables constant clamping forces and consequently ensures properly fixed tools or workpieces in machine tool chucks
** minimum order qty 12 pieces **
The first measuring instrument in the Lignomat product row which allows a non destructive measuring. The Combi SCAN disposes of a specially big illuminated display which indicates consistently the settings with regard to species of wood and thickness.
The measuring depth is switchable from 7 mm to 20 mm. The surroundings temperature is automatically measured not to falsify the measuring result at different temperatures.
Measuring range 6 - 70%
The calibration of the meter is automatic.
Mirka Abranet Ace 150mm P120, 50/unit qty: 50
Abranet? is a revolutionary abrasive material offering dust free sanding with no clogging. The open mesh design features thousands of tiny holes which will make sure that when used with suitable extraction the passage of dust will be incredibly efficient.
Because Abranet? abrasive keeps the surface that you are sanding dust free, this results in a very uniform scratch pattern leaving an ultra smooth finish. It is incredibly durable and will last twice as long as many conventional abrasives making it very cost effective. These velcro-style backed discs are suitable for a wide range of materials including the decorating, woodworking and automotive industries.
Features and Benefits:
An incredibly efficient long lasting abrasive
Open mesh design eliminates clogging
Dust free sanding when used with extraction
150mm diameter
High quality neoprene cord used on CNC routers to create vacuum sealed zones on work tables and jigs. D = 8 mmIn Stock£45.00£54.00As low as £45.90
Aigner Bowmould master shaping guard is a patented modular system that allows fast and safe machining on curved work. It can be used for either left hand or right hand machining and comes with infinitely adjustable infeed guide, dust shields suitable for tool diameters up to 150mm and suitable for either hand or power feed use. The unti features integrated dust and chip collection with dust spigot to rear. Tools are easily visible through the transparent shield. The spring-loaded shield is used to adjust the necessary pressure on the workpiece. Optional equipment: Curved moulding stop, slips on the arbor to allow precise depth of moulding adjustment. Optional guide wheels can also be used for safe accurate guiding. Features: Fully adjustable guard brushes; Brake shoe integrated in the starting strip which may be swung through 90 degrees from its working position into its inoperative position and vice versa. In both positions it is automatically locked, and ensures stopping of the starting ring. Maximum tool diameter 220mmIn StockList £1,036.80£798.00Inc Vat £957.60
The Aigner table extensions are part of the modular range of accessories. The basic table is 1100mm long and 170mm wide, and can be clipped on and off machines in seconds when not in use. A range of optional rail lengths are available for mounting. With the use of a lionking clamp (AI212226000172), 2 units can be connected to give 2200mm support or multiple units can be mounted side by side for wider support. These table extensions are ideal for bandsaws, shapers, spindle moulders, circular saws etc. The fold down leg locks into place and offers a wide range of height adjustment. Useful additions such asthe optional back stroke protection make it an invaluable aid when producing 'stop mouldings'. Additionally, it supports other units such as CirQuick, Segmenter etc for cutting arcs and curves. Features: Solid table made of anodised aluminium Weight 6kg Shipping Dims 120 x 23 x 6cm NOTE - Mounting rails should be purchased separately Option to extend the length:AI212226000172 Aigner Coupling bracket to join 2 tablesIn StockList £253.20£185.00Inc Vat £222.00
Aigner Integral Fence System - 500mm infeed + 500mm outfeed A beautifully engineered fence system with revolutionary features for safe and accurate setting on spindle moulders and shapers. On spindle moulders the opening in the tool area is always problematic. The Aigner integral fence provides a guiding area without any gap, by using an integrated set of fingers that can be swung across to provide continuous support. The fingers have micro adjustment in the vertical plane allowing them to give maximum support. Additional safety, working, and support units can be mounted on to the integral fence. These include the flush fix, support rail, pressure module, filling bar and spreader. The anodised finish on the fence surfaces reduces friction and gives a wear resistant finish. Features: - Four versions available, making the fences suitable for most spindle moulders - Mounting and adjusting can be done quickly and simply without additional tools - Exact setting to tool diameter and tool height is possible thanks to continuous adjustability Central fence mounting bolt can sit 45 - 80mm height from machine bedIn StockList £1,747.20£1,295.00Inc Vat £1,554.00
FME Handheld Moisture Meter - for the professional in the wood industry Fast and accurate measurement of 79 wood species and 8 construction materials. The tool for the true professional in the woodworking and construction industry. The FME has the same sensor technology as the FMD-Plus assuring an accuracy of 0,2 %. The FME calculates measurement data for 79 individual wood species 4 common wood groups 8 popular building materials like concrete, MDF or gypsum. The internal memory can hold up to 50 measurements, through which you can scroll using the instrument's panel keys. Connect our optional temperature sensor for automatic temperature correction. The standard kit includes the FME Meter A Hammer Probe Assorted insulated and non-insulated pins a manual and cabling Optionally you can order a Handgrip probe a Reference resistor an external temperature sensor to connect to the meterLead Time: 15 DaysList £1,500.00£1,195.00Inc Vat £1,434.00
CMT part no:CMT792 Magnetic Planer Knife Setting Gauge - The best knives won't perform well unless they are properly set and aligned. The built-in permanent magnets grip both the planer block and the knives while you use the integral adjustments to get the knives into perfect position - adjustable in 0.1mm increments. 1. Magnetic ceramic stop 2. Joints with magnetic connectors 3. Precision depth stop with 0.1mm increments To suit cutterblock diameter 65 - 130mm The set is supplied in a wooden box with 2 setters Three options for setting of knives: Positioning onto the toolholder body with marking onto the original knife; Positioning onto the toolholder body setting with one of the supplied gauges; Positioning directly onto the machine table and the toolholder body.In StockList £118.80£85.00Inc Vat £102.00
CMT part no:998.001.03 CMT Formula 2050 SAWBLADE & ROUTER BIT CLEANER A safe and non toxic formula to break down resin on carbide and steel surfaces, thus allowing greater life between sharpenings. Saw shops know how to get the most out of cutting tools. They know that the pitch and resin that wood leaves behind greatly shortens the useful life of carbide. We had several quality saw blade sharpeners across the country test our Formula 2050. "Phenomenal" and similar words were heard over and over about the performance of Formula 2050. Most blade and bit cleaning products work with a disolving action. It takes some powerful and nasty chemicals to dissolve wood residues and adhesives. Our safe and non-toxic Formula 2050 penetrates the microscopic cracks in the resin and attacks the bond between it and the carbide or steel surfaces. The resin releases its grip and you simply wipe it off. A clean cutting surface runs cooler and works less in the cut. The excess friction of a resin-coated blade causes heat build-up and carbide breakdown. Formula 2050 keeps your tools clean and helps you increase the life span between sharpenings and replacement. Can also be used in ultrasonic cleaning tanksIn Stock
CMT part no:998.001.01 CMT FORMULA 2050 Blade & Router Bit Cleaner is a safe and non toxic formula to break down resin on carbide and steel surfaces, allowing greater life between sharpenings. Saw shops know how to get the most out of cutting tools. They know that the pitch and resin that wood leaves behind greatly shortens the useful life of carbide. We had several quality saw blade sharpeners across the country test our Formula 2050. "Phenomenal" and similar words were heard over and over about the performance of Formula 2050. Most blade and bit cleaning products work with a disolving action. It takes some powerful and nasty chemicals to dissolve wood residues and adhesives. Our safe and non-toxic Formula 2050 penetrates the microscopic cracks in the resin and attacks the bond between it and the carbide or steel surfaces. The resin releases its grip and you simply wipe it off. A clean cutting surface runs cooler and works less in the cut. The excess friction of a resin-coated blade causes heat build-up and carbide breakdown. Formula 2050 keeps your tools clean and helps you increase the life span between sharpenings and replacement. Can also be used in ultrasonic cleaning tanks Available in 2 sizes - 500ml spray or 3780ml CanIn Stock
CMT part no:DET-001 Attach this trimmer to your workpiece, press both ends against the board for a cutting range between 13mm (1/2") and 25mm (1"), move the trimmer in the correct direction indicated by the arrow. This will cut on both sides easily. The first cutter will cut straight, the second one can be adjusted for a chamfer cut. Both cutters are made from high-quality hardened steel and can be easily replaced when worn out [ Part no CMDET001K] suitable for up to 0.6mm edgingIn StockList £31.20£21.00Inc Vat £25.20
CMT part no:CMT334-4595 The innovative CMT334 Universal Hinge Boring Head employs three spindles which allow you to bore the holes for all of the major hinge brands. The head can be utilized on boring and point to point machines. Options to consider: BORING BITS TO SUIT: cm39335011 Dia. 35mm x 38.5mm (r-hand) cm39308012 Dowel drill dia.8mm x 38.5mm (l-hand)In StockList £448.80£297.00Inc Vat £356.40
CMT part no:TMP-1200 The CMT flexible template is a guide strip for that can be curved and formed to use on spindle moulders & routers. It is easy to use - just screw it on to any kind of wooden panel, MDF or chipboard for creating you forms, arcs and curved elements. The flexible strip template is fixed plate with countersunk screws. The CMT flexible template is made of a highly-resistant flexible plastic, which can be tied in knots without any risk of ruining or reducing flexibility. Screw your template to the edge of the panel and follow its shape and rout the border on the guide ring. The template is suitable for manual feed on routers, router tables and spindle moulders. Rout easily, safely and accurately to make multiple forms such as arcs, curved elements and cut-out forms. Mark the edge of your form precisely and screw it onto a previously-placed panel from underneath. If you rout with a guide ring mounted onto your spindle moulder, keep your hands a safe distance behind the template. Two different profiles in three lengths are available. Please notice that the smallest profile features a short radius, whereas the larger profile features a larger opening in case of flat and long curves.In StockList £97.20£65.00Inc Vat £78.00
CMT part no:TMP-2000 The CMT flexible template is a guide strip for that can be curved and formed to use on spindle moulders & routers. It is easy to use - just screw it on to any kind of wooden panel, MDF or chipboard for creating you forms, arcs and curved elements. The flexible strip template is fixed plate with countersunk screws. The CMT flexible template is made of a highly-resistant flexible plastic, which can be tied in knots without any risk of ruining or reducing flexibility. Screw your template to the edge of the panel and follow its shape and rout the border on the guide ring. The template is suitable for manual feed on routers, router tables and spindle moulders. Rout easily, safely and accurately to make multiple forms such as arcs, curved elements and cut-out forms. Mark the edge of your form precisely and screw it onto a previously-placed panel from underneath. If you rout with a guide ring mounted onto your spindle moulder, keep your hands a safe distance behind the template. Two different profiles in three lengths are available. Please notice that the smallest profile features a short radius, whereas the larger profile features a larger opening in case of flat and long curves.In StockList £259.20£166.00Inc Vat £199.20
CMT part no:CMT650 Perfect joints on kitchen worktops from 420mm to 650mm width. The CMT650 is designed to cut kitchen worktop joints with any type of router. Letter code system for different operations makes the jig work much easier and very quick. JIG INCLUDES: -1 x phenolic template; -3 x zinc-coated steel location bush; -1 x adjustable end stop; -1 x instruction manual. JIG REQUIRES: -a portable router; -a ¥30mm guide bush; -a ¥12mm TCT straight bit; -two clamps. CMT650 IS DESIGNED FOR ¥12MM STRAIGHT BITS: -template made of stable and hardened material; -for 45 degrees and 90 degrees joints; -integrated templates for rounding over and chamfering edges; -extra location bush for the worktop width of 600mm; -two integrated templates for panel bolt recesses; -delivered with a clear and comprehensive instruction manual.Lead Time: 15 DaysList £243.60£154.00Inc Vat £184.80
CMT part no:183-HSK A new universal assembly support system for setting your tools in HSK-F63 tool holders. The innovation lies in the special bi-directional roller bearings which clamp the tool holder to the flange. This unique system offers maximum protection to the tool taper and clamps are no longer needed D=63mmIn Stock
Polycarbonate table saw guard - Complete with riving-knife: The Alfa saw guard is designed to fit on riving knives of all types of circular saw bench with a blade diameter from 250 to 315 mm. The guard is supplied complete with a standard 2.8mm riving knife for most applications. This guard is has an intergral 60mm exhaust outlet and deflector for better chip flow. A groove in the front of the guard indicates the cutting line and the special design for the front of the guard allows the guard to be set low accommodating variance in material thickness. Includes FREE push stick. This protection hood can be fitted on the riving-knife in two different positions according to blade diameter: 250mm and 300mm. 2.8MM riving knifeIn StockList £189.60£129.00Inc Vat £154.80
Koala Spindle Moulder Ring Fence: This device allows you to guard and machine curved and circular work pieces whilst giving good visibility and protection. The guard can be fitted on all professional spindle moulders and shapers with a max. spindle diameter of 50mm and will accommodate tools upto 180mm diameter. The milling depth is easily set by the micro adjustment knob to give accurate finished dimensions. The aluminium infeed guide and workpiece clamp , are both adjustable in height parallel to worktable. Both suction pipe no.4 @120mm and fence no.6 can be fitted either on the left or on the right hand side of this guard according to spindle rotation or specific working requirements. Approx weight 12kgLead Time: 13 DaysList £648.00£485.00Inc Vat £582.00
Tapoa Spindle Moulder Ring Fence: This device allows you to guard and machine curved and circular work pieces whilst giving good visibility and protection. The guard can be fitted on all professional spindle mouders and shapers with a max. spindle diameter of 50mm and will accomodate tools upto 160mm diameter. The milling depth is easily set by the micro adjustment knob [no. 3] to give accurate finished dimensions. The aluminium infeed guide [no. 1] and workpiece clamp [no. 2], are both adjustable in height parallel to worktable. Both suction pipe no.4 @120mm and fence [no.6] can be fitted either on the left or on the right hand side of this guard according to spindle rotation or specific working requirements.In StockList £528.00£395.00Inc Vat £474.00
The new TX Planer guard can be fitted on any planer up to 650 mm wide, as the guard is mounted on the take off table but are unsuited to machines with swing away top beds The bridge is hinged to reduce the room occupied near the operator (according to EC standards the machine guard should not occupy, more than 500 mm for surface planers and 550 mm for combined surface and thickness). Edge planing (fig. 2): loosen knob D and pull guard bridge out just enough to uncover just enough of teh cutter block. Always use a push stick. Flat planing (fig. 3): to plane a workpieces main surface, lift guard bridge upon knob E a little above workpiece thickness so to allow its passage underneath while pushing it forward with one hand and pressing it on worktable with the other one. After each pass bring workpiece back to start position passing it above the bridge that will first lower onto worktable surface then rise again up to the position previously set. . During use the guard moves up and down parallel to worktable. With planing shafts longer than 450 mm it is advisable to use a hinged version of the bridge to limit the room occupied near the operator (according to EC standards machine provided with ancillary equipment should not occupy, in addition to its proper dimensions, more space than 500 mm for surface planers and 550 mm for combined surface and thickness planers). Always use a push stick.In StockList £566.40£417.00Inc Vat £500.40
The 2m Flipstop is a simple Measuring stop system which saves time, money and materials. It can be used on most types of machines to provide accurate, repeatable machining operations easily and quickly. It is cost effective to install, simple to use, saves the time and effort of measuring and marking. Features: FLIPSTOP consists of a metal track with measuring scale which is fitted to a fence. Pivoting stops are moved along the track to the required position. When not in use the stop is simply flipped up out of the way. A number of stops can be fitted onto the track which makes it possible to keep multiple settings on a single unit and simply to 'flip' between settings with no further adjustments. Highly versatile, FLIPSTOP is simply screwed to a 45mm high fence on the machine. The FLIPSTOP track is available in 1 m, 2m or 3m lengths. It can be fitted with left or right reading measuring scales Accurate, repeatable and fast FLIPSTOP is designed to ease accurate measuring and to give consistently repeatable results. This makes it ideal for precision work as well as for volume production where speed of throughput are important. Standard FLIPSTOP set Comprises: One length of track, two stops, two self adhesive scales, fixing screws, allen key and instructions.In Stock£230.00£276.00
The 3m Flipstop is a simple Measuring stop system which saves time, money and materials. It can be used on most types of machines to provide accurate, repeatable machining operations easily and quickly. It is cost effective to install, simple to use, saves the time and effort of measuring and marking. FLIPSTOP consists of a metal track with measuring scale which is fitted to a fence. Pivoting stops are moved along the track to the required position. When not in use the stop is simply flipped up out of the way. A number of stops can be fitted onto the track which makes it possible to keep multiple settings on a single unit and simply to 'flip' between settings with no further adjustments. Highly versatile, FLIPSTOP is simply screwed to a 45mm high fence on the machine. The FLIPSTOP track is available in 1 m, 2m or 3m lengths. It can be fitted with left or right reading measuring scales Accurate, repeatable and fast FLIPSTOP is designed to ease accurate measuring and to give consistently repeatable results. This makes it ideal for precision work as well as for volume production where speed of throughput are important. Standard FLIPSTOP set Comprises: One length of track, two stops, two self adhesive scales, fixing screws, allen key and instructions.Lead Time: 14 Days£279.00£334.80
20m roll pvc high quality flexible hose 150mm diameterLead Time: 26 Days
Heavy duty roller conveyor height leg only - 870 - 910mm (these are sizes for legs only must allow 100mm for roller diameter)Lead Time: 6 Days£25.00£30.00As low as £26.40
The IDT5 is a red line laser specifically designed for industrial applications, with a strong anodised aluminium housing that protects the laser diode. It's built with components of the highest quality to ensure an extended working life, and is covered by a 30-month warranty. The IDT5 has standard power outputs of 20 mW. It projects a fine, visible red line 5-8m, that simulates the cutting line and helps with the accurate positioning of material. The available voltages are 85-265 Vac The state-of-the-art design and construction of the IDT5 guarantees a perfect temperature stability, without the need for further cooling systems. The IDT5 is a reliable laser with a proven track record, capable of withstanding the most challenging work conditions. supplied complete with mounting bracket. Size Length 200 mm Diameter 50 mm Protection IP 67 Input Voltage 85-265 VAC or 12-24 VDC Operating current Imax 90-110-130 Operating temperature -15 to +55 degreesC Storage temperature -40 to +85 degreesC Wavelength 635 nm Housing Red anodised aluminium Safety Class 2MLead Time: 21 Days£415.00£498.00
Klueber ALTEMP Q NB 50 is a white/beige lubricating paste containing a mineral base oil, a barium complex soap and inorganic solid lubricants. Benefits for your application Low lubricant costs for initial and relubrication due to long service life of water- and media-resistant product. Good wear and corrosion protection helps reduce assembly forces and screw torques and prevents tribo- and fretting corrosion High pressure absorption capacity enables constant clamping forces and consequently ensures properly fixed tools or workpieces in machine tool chucks ** minimum order qty 12 pieces **In Stock£65.00£78.00
The first measuring instrument in the Lignomat product row which allows a non destructive measuring. The Combi SCAN disposes of a specially big illuminated display which indicates consistently the settings with regard to species of wood and thickness. The measuring depth is switchable from 7 mm to 20 mm. The surroundings temperature is automatically measured not to falsify the measuring result at different temperatures. Measuring range 6 - 70% The calibration of the meter is automatic.In StockList £181.20£130.00Inc Vat £156.00
Mirka Abranet Ace 150mm P120, 50/unit qty: 50 Abranet? is a revolutionary abrasive material offering dust free sanding with no clogging. The open mesh design features thousands of tiny holes which will make sure that when used with suitable extraction the passage of dust will be incredibly efficient. Because Abranet? abrasive keeps the surface that you are sanding dust free, this results in a very uniform scratch pattern leaving an ultra smooth finish. It is incredibly durable and will last twice as long as many conventional abrasives making it very cost effective. These velcro-style backed discs are suitable for a wide range of materials including the decorating, woodworking and automotive industries. Features and Benefits: An incredibly efficient long lasting abrasive Open mesh design eliminates clogging Dust free sanding when used with extraction 150mm diameterIn StockList £62.40£45.00Inc Vat £54.00
