DMC SD 60 RCS 1350 Wide Belt Sander

Base and working table
* steel structure with electric cabinet on the machine front
* sanding belts introduction from the machine left side
* powered adjustment of working thickness
* main motor positioned inside the base
Electrical equipment
* electromechanical keyboard positioned on the machine front side
* automatic star-delta start of the main motor
* overload protections on the motors
* motors in isolation class IP54
Emergency and safety devices
* automatic brake for rapid shutdown of the operating group
* hand-safety emergency device in the infeed panel area
* front and rear emergency pushbutton
* padlockable main switch
* safety micro for overthickness
* automatic emergency stop machine for:
- sanding belt breaking
- not-tensioned sanding belt
- lateral outplacement of sanding belt
- absence of compressed air
- overload on main motor
N.B. The machine with standard configuration is supplied with 400 Volt 50 Hz
and 3-phase version + neutral + earth.
When the 400 voltage supply has not the neutral phase, it is necessary to select
the single-phase transformer, foreseen on the price list.
The same transformer has to be selected also when the machine is supplied with
voltages higher than 400 volt, independently from the neutral phase presence.
The machine supply with 220 or 230 voltages (50 or 60 Hz) is foreseen in the
price list with an additional cost.

"B" versions:
"MESAR" elastic sectional pads with single adjustable pressure
C or C-Plus versions:
"MESAR" electronic sectional pads complete with:
- on/off pneumatic cylinder for pad unit
- "Logic 50" electronic programmer which synchronizes the anti-dubbing device
with the feed speed and activates the quantity according to the geometric shape
of the workpiece. It allows the selection of a higher or lower number of sections
tothe left, to the right or on both sides of the piece.
- working pressure adjustment

"MESAR 20" with 20 sectors and 55 mm distance between sectors, complete
with B/20 infeed reading bar
- "MESAR 37" with 37 sectors and 30 mm distance between sectors, complete
with B/ 37 infeed reading bar

working width mm 1.350
min/max. working thickness mm 4-170
sanding belt width mm 1.370
sanding belt length mm 2.150
main motor power kW(HP)11(15)11 (15)
DMC logo
  • approximate lead time: 45 days
  • Part Number: SCDMSD60RCS135
£ Enquire
Lease from only
£91.25 per week

Leasing plans are for
UK businesses only
and subject to status

Product Description
  • N/A
Additional Information
Additional Information
Part Number SCDMSD60RCS135
Manufacturer DMC

Write Your Own Review

You're reviewing: DMC SD 60 RCS 1350 Wide Belt Sander

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Your Rating