Edgebander Riepe NFLY Release Agent 10 Litre
Areas of application:
(a) Pressure roller
(b) Edgeband/ protective foil
(c) Slide shoe
(d) DUO scraper
(a) Intermittent application to the pressure roller
Glue residues cannot adhere to the roller
(b) Spray directly onto the surface of the edgeband
Avoidance of marking and damage
Protective film is protected and not removed from the edge
(c) Edge/protective foil automatically transfers the release agent to the slide shoes
Glue residues do not adhere Prevents marking and friction
(d) Direct application onto the DUO scraper
No clogging of the DUO scraper
(e) Application to the tooling
Prevents fouling of the trimmers
The fine nozzle of this electronically controlled unit applies the Release Agent NFLY? to the contact pressure roller. This is achieved by adjustable timing interval. The spray duration is about 3 seconds. In this way glue is prevented from adhering to the contact pressure rollers. In addition the special release agent is taken from the edge and transferred to the downstream contact pressure rollers or anti-friction shoes. The contact pressure rollers and the anti-friction shoes remain free of glue residue. The anti-friction shoes are simultaneously cooled. Result: A notably enhanced quality. Contact pressure rollers and anti-friction shoes need no longer be cleaned.
For Post-/Softforminhg work, the Release Agent NFLY? is sprayed directly on the top coat in front of the anti-friction shoes. The special release agent is transferred to the anti-friction shoes to form a glide film.
This prevents squeezed out glue residue from adhering to them and the workpiece.