Innovator G2 Veneer Splicing Machine
INNOVATOR's VeneerPlus G2, is different from the traditional paper taping or zig-zag thread stitchers, is used to accurately and firmly glue the veneers edges with no visible joint line. VeneerPlus G2, the same as VeneerPlus G1, is equipped with the integrated gluing system inside. It's particularly suitable for the furniture industry and high-end decorative plywood to splice up to 5 mm thick veneers with the integrated gluing system. After the well cut and trimmed veneer strips with a 90-degree jointing angle on the jointing face of veneer edges are aligned evenly by the synchronized infeed rollers, the veneers are directly conveyed to the singular gluing unit for gluing edges and then transported to the heating section for glue curing. With this VeneerPlus G2, the veneer gluing and splicing processes can be accomplished within one single machine. Coupled with INNOVATOR's Double Knife Veneer Guillotines (CutMate D series), a perfect veneer cutting and splicing work can be achieved.