Italpresse SCF6K 3000 x1300 Heated Press

ItalPresse SCF6K Heated Hydraulic Upstroke Press - an economical
veneer & laminating press made to the highest standards. These presses use a compact oil boiler to circulate heated oil through out the platten give a very even and controlled heated surface.
HYDRAULIC SYSTEM
- Compact hydraulic power unit
- Dual pump for high flow-low pressure and low flow-high pressure steps
- Automatic re-set of hydraulic pressure
- Hydraulic power Kw. 2,2
- Up-stroking movement of bottom platen
CONSTRUCTION DETAILS
- Welded beams press frame, calculated with high structural safety factor
- Frame, moving platen and fixed platen machined on CNC heavy milling machine.
- The moving platen is a fabricated weldment of high thickness steel beams to withstand the pressing tonnage with minimal deflection.
- Self-lubricating guides diagonally placed, for flatness control
- Rack and pinion system assures constant parallelism of the moving platen
during closing and opening
OPERATOR INTERFACE
- Key on/off switch
- Light-up pushbutton for emergency resetting (Run)
- Computerized control of the pressing functions:
· Digital pressing timer with automatic opening and manual override
· Digital display and setting of working temperature
· Digital display and setting of the working pressure
· Adjustable opening stroke of press platen
· Digital timer for the morning start-up of the boiler
Italpresse logo

Was: AU$32,217 EX VAT

Now Only AU$30,503 EX VAT

  • approximate lead time: 3 days
  • Part Number: IPSCF6
or
Lease from only
AU$151 per week


Leasing plans are for
UK businesses only
and subject to status

Product Description
Details
  • HEATING SYSTEM
  • - Heating fluid Thermal oil
  • - Heating system Electric Boiler
  • - Max platen temperature °C 120
  • - Heating power Kw 13,5
  • - Special pump, plant and valves for high temperature oil
  • - Electric boiler mounted on the press frame
  • - Safety thermostat
  • HYDRAULIC CYLINDERS:
  • - Maximum thrust ton. 50
  • - Thrust cylinders nr. 6
  • - Thrust piston diameter mm. 70
  • - Cylinder stroke mm. 300
  • - Press cylinders made of special seamless tubes of thick steel.
  • - Welding done by a robot machine to control all welding parameters.
  • - CNC machining allows minimum tolerance for precision movement and long
  • life of the seals.
  • - Pistons are machined out of a steel rod, CNC ground, polished and thickness
  • chromed.
Additional Information
Additional Information
Part Number IPSCF6
Manufacturer Italpresse
Reviews

Write Your Own Review

You're reviewing: Italpresse SCF6K 3000 x1300 Heated Press

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Your Rating

Recently Viewed