iTECH 01446 Cast Iron Table Saw Bench with iTECH DC001 Fine Dust Extractor with Fine Dust Extractor and Packet of 25 Dust Bags
The 01446 12" Table Saw is a professional quality saw bench to cope with all general workshop tasks. Cast Iron Table Saw Bench
The 01446 is big brother to the 1332, this cast iron table saw bench represents a great addition to our range. The saw is powered by a high powered, quiet running 4hp induction motor that will run reliably, day in, day out in small workshops. The saw has a large cast iron table that is precision ground and polished to offer minimal levels of friction, ensuring smooth and controllable workpiece passage.
The grey iron casting absorbs and dampens vibration. The table has two machined slots either side of the blade for accepting the mitre gauge for precise angle sawing. The full length rip fence glides freely along its graduated rail, double locks and has a cam action clamp to quickly and rigidly lock the fence in position. Two well positioned hand wheels allow for smooth and exact blade height and tilt.
Motor Power 4.0 hp
Fuse rating 16 amps
Maximum Speed no load 4000rpm
Bore Size 30mm
Blade Tilt 0 -45 degree
Main Table Size 800mm (D) x 600mm (W)
Extension Table Size 800mm (D) x 440mm (W)
Table Working Height 860mm
Cutting Capacity at 0 degree 100mm
Cutting Capacity at 45 degree 80mm
iTECH DC001S 1 Bag Dust Extractor is a ruggedly extractor is designed for small workshops. The industrial construction and quality finish sets it apart from others. It is big enough to handle a 310mm planer or many other workshop machines. The cyclone sfiltration system works by separating the waste from the airflow, diverting the waste into the collecting bag. The base is fitted with castors for mobility around the workshop. The 125 mm inlet is fitted with a twin branch 100mm adaptor, allowing connection to either one or two machines. Supplied complete with 1x 3m hose 100mm diameter.
[Fan diameter] 300mm
[Inlet diameter] 125
[Inlet holes] 2 x 100mm
[Air capacity] 1490cfm
[Bag diameter] 500mm
[Packing size] 92x58x58cm
[Motor power] [2hp]
[Noise level] 87dB
Machines are fitted with 13a plug but for EEC usage require connection to 16a supply
Machine supplied complete with 1 x 3m pvc hose
Standard bag filtration efficiency is 30 micron
Fine Dust Canister for iTech DC001 & 2
This product is in stock and available for immediate delivery.
Air filter canister for the iTech DC001 and DC002 dust extractors. Upgrade your iTech dust extractor to filter out fine dust caused by: Sanding, Sawing, Routing etc... Filtration to 1 micron. Internal mounting size 500mm Diameter.
ITWM01446 + ITWMDCCFF + ITWMDC001S + PJBAG42