CMT part no:CMT300-T129
Dovetail joints give a touch of craftsmanship to your work, but many woodworkers avoid these joints, because of their apparent
complexity. CMT's new 305mm dovetail jig is the fast easy solution! Thanks to precise templates, permanent stops and easy
adjustments, we have taken the "tinkering" out of dovetail joinery. Simply clamp your workpiece in with the edges against the
factory-set stops, set your bit depth and then you are ready to rout. Rest assured, we haven't cut corners on quality either.
This jig features a rugged steel body, templates, stops and clamping bars that together produce perfect long-lasting joints for
all your woodworking needs. The jig accepts stock from 11mm to 25mm in thickness and is capable of crafting a variety of
joints with the available templates. The jig comes with a template for 12.7mm half blind joints as well as a template guide.
Optional templates are available for through dovetail and box joints.
CMT part no:CMT792
Magnetic Planer Knife Setting Gauge - The best knives won't perform well unless they are properly set and aligned. The built-in permanent magnets grip both the planer block and the knives while you use the integral adjustments to get the knives into perfect position - adjustable in 0.1mm increments.
1. Magnetic ceramic stop
2. Joints with magnetic connectors
3. Precision depth stop with 0.1mm increments
To suit cutterblock diameter 65 - 130mm
The set is supplied in a wooden box with 2 setters
Three options for setting of knives:
Positioning onto the toolholder body with marking onto the original knife; Positioning onto the toolholder body setting with one of the supplied gauges; Positioning directly onto the machine table and the toolholder body.
CMT part no:CMT300
Dovetail joints give a touch of craftsmanship to your work, but many woodworkers avoid these joints, because of their apparent complexity. CMT's new 305mm (12") dovetail jig is the fast easy solution! Thanks to precise templates, permanent stops and easy adjustments, we have taken the "tinkering" out of the dovetail joinery. Simply clamp your workpiece in with the edges against the factory-set stops, set your bit depth and then you are ready to rout. Also, we haven't cut corners on quality either. This jig features steel body, templates, stops and clamping bars, so it produces perfect long-lasting joints for all your woodworking needs. The machine accepts stock from 11mm (7/16") to 25mm (1") thick, and is capable of producing a variety of joints with the available templates. Standard jig includes a template for 12,7mm (1/2") half blind joints and a template guide. Optional templates are available for through dovetail and box joints.
305mm (12") max length;
11mm (7/16") ~ 25mm (1") joint thickness.
STANDARD EQUIPMENT:
-standard ¥12,7mm (1/2") silver blind template: CMT300-T128
-¥15,8mmx4mm (5/8" x 5/32") template guide: 899.005.00
Some routers requires a universal base plate to fit the provided template guide. Please check the following optional accessories in the "SPARE PARTS" section:
CMT300-SB1 (S=¥8, ¥12mm);
CMT300-SB2 (S=¥6,35, ¥12,7mm).
CMT part no:CMT3000
CMT 3000 Ellipse & Circle Cutting Jig for Routers -
This product has been designed for cutting ellipses and circles with
any router types. You can make ellipses and circles for windows, doors and any other application.
By using two slides into the T-slot you can cut ellipses, whereas
if you use one slide, you can cut circles.
Ellipse and
circle cutting jig:
- Precise and rapid creation
- of ellipses and circles.
- Simple setup and effective
- operating.
- Clamping system for any type
- of routers.
- Special plastic cross frame with
- excellent sliding performance.
- Precisely machined T-slots
- and steel sliders.
- Zinc-coated metal parts to
- prevent rust.
- Delivered in a carton box along
- with instruction manual.
CMT part no:PGC-B2B
Lay two more straight edge clamps on the back of the other pair of straight edge clamps and secure them by using your back-to-back connectors.
Fasten the bottom jaw pads to the table top and clamp wood with the top jaw pads.
Thanks to the low profile jaws your work surface is never obstructed.
The back-to-back straight edge clamps can also be taken apart for making two
separate clamps.
CMT part no:BBS-001
These blocks are great for holding your workpiece without any clamps. Their anti-slip surface grip both your bench top and the underside of your workpiece.
Raise your work above the bench and benefit from
plenty of clearance for your router bits, cutters, etc.
Lenght: 75mm - Width: 50mm - Height: 25mm
CMT part no:DET-001
Attach this trimmer to your workpiece, press both ends against the board for a cutting range between 13mm (1/2") and 25mm (1"), move the trimmer in the correct direction indicated by the arrow. This will cut on both sides easily. The first cutter will cut straight, the second one can be adjusted for a chamfer cut.
Both cutters are made from high-quality hardened steel and can be easily replaced when worn out [ Part no CMDET001K]
suitable for up to 0.6mm edging
CMT part no:DET-002
Edge banding end trimmer
An indispensable tool for easy and safe end trimming after edge banding. Position the tool on the banding, press down on the handle to operate the blade in a shearing action. The cutting knives are interchangeable, so when the cutting knife becomes dull, you can simply replace it with the anvil knife for a double lifetime. For cutting banding up to 0,5mm thick with a maximum cutting width of 54mm.
This tool can also be paired up with our double edge trimmer DET-001.
We recommend using our edge banding end trimmer DET-002 before
using our double-edge trimmer DET-001.
CMT part no:DET-004
CMT Edgebanding Iron 230v
Apply pre-glued edge banding easily and accurately. The iron non-stick surface allows smooth and easy application. The thermostatically controlled short preheat time gets you working quicker. Includes heat resistant metal base to place iron
when not using it.
- Includes thermostatic heat control.
- Non-stick coating.
- Specially shaped shoe with rounded edges.
- Metal stand.
- 154cm (5-1/2') power cord, 230V.
CMT part no:CMT334-4595
The innovative CMT334 Universal Hinge Boring Head employs three spindles which allow you to bore the holes for all of the major hinge brands. The head can be utilized on boring and point to point machines.
Options to consider:
BORING BITS TO SUIT:
cm39335011 Dia. 35mm x 38.5mm (r-hand)
cm39308012 Dowel drill dia.8mm x 38.5mm (l-hand)
CMT part no:TMP-1200
The CMT flexible template is a guide strip for that can be curved and formed to use on spindle moulders & routers. It is easy to use - just screw it on to any kind of wooden panel, MDF or chipboard for creating you forms, arcs and curved elements. The flexible strip template is fixed plate with countersunk screws. The CMT flexible template is made of a highly-resistant flexible plastic, which can be tied in knots without any risk of ruining or reducing flexibility.
Screw your template to the edge of the panel and follow its shape and rout the border on the guide ring. The template is suitable for manual feed on routers, router tables and spindle moulders. Rout easily, safely and accurately to make multiple forms such as arcs, curved elements and cut-out forms. Mark the edge of your form precisely and screw it onto a previously-placed panel from underneath.
If you rout with a guide ring mounted onto your spindle moulder, keep your hands a safe distance behind the template. Two different profiles in three lengths are available. Please notice that the smallest profile features a short radius, whereas the larger profile features a larger opening in case of flat and long curves.
CMT part no:TMP-1000
The CMT flexible template is a guide strip for that can be curved and formed to use on spindle moulders & routers. It is easy to use - just screw it on to any kind of wooden panel, MDF or chipboard for creating you forms, arcs and curved elements. The flexible strip template is fixed plate with countersunk screws. The CMT flexible template is made of a highly-resistant flexible plastic, which can be tied in knots without any risk of ruining or reducing flexibility.
Screw your template to the edge of the panel and follow its shape and rout the border on the guide ring. The template is suitable for manual feed on routers, router tables and spindle moulders. Rout easily, safely and accurately to make multiple forms such as arcs, curved elements and cut-out forms. Mark the edge of your form precisely and screw it onto a previously-placed panel from underneath.
If you rout with a guide ring mounted onto your spindle moulder, keep your hands a safe distance behind the template. Two different profiles in three lengths are available. Please notice that the smallest profile features a short radius, whereas the larger profile features a larger opening in case of flat and long curves.
CMT part no:TMP-2000
The CMT flexible template is a guide strip for that can be curved and formed to use on spindle moulders & routers. It is easy to use - just screw it on to any kind of wooden panel, MDF or chipboard for creating you forms, arcs and curved elements. The flexible strip template is fixed plate with countersunk screws. The CMT flexible template is made of a highly-resistant flexible plastic, which can be tied in knots without any risk of ruining or reducing flexibility.
Screw your template to the edge of the panel and follow its shape and rout the border on the guide ring. The template is suitable for manual feed on routers, router tables and spindle moulders. Rout easily, safely and accurately to make multiple forms such as arcs, curved elements and cut-out forms. Mark the edge of your form precisely and screw it onto a previously-placed panel from underneath.
If you rout with a guide ring mounted onto your spindle moulder, keep your hands a safe distance behind the template. Two different profiles in three lengths are available. Please notice that the smallest profile features a short radius, whereas the larger profile features a larger opening in case of flat and long curves.
CMT part no:999.500.01
CMT has turned the Industrio routing system into a great tool with new accessories such as phenolic insert, integral aluminium scales and an improved fence. Also, you will find some new optional features, such as a rugged moulded featherboard and a new mitre gauge.
The Router Table includes:
999.501.09 Unique phenol top with new insert plate
Now featuring a 298x374mm (11-3/4"x14-3/4") insert plate, the top is milled from 12mm (15/32") thick phenol. Sturdy and very enduring material, phenol is much more resistant to warping than melamine. The top also features new aluminium scales on both ends to set the fence quickly and properly.
Easy fast bit change
No need to remove the router or fumble beneath the table top to change the bits. CMT's useful bent wrench allows you to replace the bits from above quickly and easily. 15 kg. shipping weight.
999.501.10 Pivoting, zero-clearance fence with new clamping system
Our extruded aluminium fence can be used as conventional locked-in-place fence or as a pivoting fence. New, quick-adjusting clamps on both ends of the fence make adjustments a breeze, especially when used in conjunction with the aluminium scales that we've added to the table top. The fence also includes a sub fence of high density white plastic for an ultra smooth feeding surface, with a replaceable centre section to create zero-clearance inserts. 8,5 kg shipping weight.
999.501.03 Sturdy 20mm-thick (25/32") melamine cabine
This is easy to assembly with posts and cross dowels. Also, it includes a double-door storage area to keep bits, wrenches and more tools safe and dust-free. 32,5 kg. shipping weight.
Router table dimensions:
79x59x (h)93cm (27"x20-1/2"x35-13/16" high);
55 kg. weight.
CMT part no:PGC-50
PROFESSIONAL STRAIGHT EDGE CLAMPS
PGC
Used as a fence for your bandsaw, drill press or even as an auxiliary fence on your router table or table saw, CMT's professional straight edge clamps represent a two-in-one tool, allowing you to either use them as an edge guide, or to easily clamp your boards or any object for woodworking. Available in different sizes.
HERE ARE THE MAIN FEATURES:
-Made of extruded aluminium for easy carriage and enhanced durability.
-Light, yet more rigid than any other clamps on the market.
-Measuring scales, low-profile jaws, built-in T-tracks on the top allowing the use of accessories or jigs.
-Either single or back-to-back clamps.
Low-profile clamps allow for accurate cuts, dados and grooves. In addition they properly work as an auxiliary fence on your drill press or router table. Sturdy jaws hold your workpiece to the full length of the clamp without any side-to-side play. Back-to-back clamps with the suitable accessories also let you manage your woodworking operations with a lot of versatility. Adjustable scale and two T-tracks allow you to use many accessories.
CMT part no:PGC-24
PROFESSIONAL STRAIGHT EDGE CLAMPS
PGC
Used as a fence for your bandsaw, drill press or even as an auxiliary fence on your router table or table saw, CMT's professional straight edge clamps represent a two-in-one tool, allowing you to either use them as an edge guide, or to easily clamp your boards or any object for woodworking. Available in different sizes.
HERE ARE THE MAIN FEATURES:
-Made of extruded aluminium for easy carriage and enhanced durability.
-Light, yet more rigid than any other clamps on the market.
-Measuring scales, low-profile jaws, built-in T-tracks on the top allowing the use of accessories or jigs.
-Either single or back-to-back clamps.
Low-profile clamps allow for accurate cuts, dados and grooves. In addition they properly work as an auxiliary fence on your drill press or router table. Sturdy jaws hold your workpiece to the full length of the clamp without any side-to-side play. Back-to-back clamps with the suitable accessories also let you manage your woodworking operations with a lot of versatility. Adjustable scale and two T-tracks allow you to use many accessories.
CMT part no:PGC-36
PROFESSIONAL STRAIGHT EDGE CLAMPS
PGC
Used as a fence for your bandsaw, drill press or even as an auxiliary fence on your router table or table saw, CMT's professional straight edge clamps represent a two-in-one tool, allowing you to either use them as an edge guide, or to easily clamp your boards or any object for woodworking. Available in different sizes.
HERE ARE THE MAIN FEATURES:
-Made of extruded aluminium for easy carriage and enhanced durability.
-Light, yet more rigid than any other clamps on the market.
-Measuring scales, low-profile jaws, built-in T-tracks on the top allowing the use of accessories or jigs.
-Either single or back-to-back clamps.
Low-profile clamps allow for accurate cuts, dados and grooves. In addition they properly work as an auxiliary fence on your drill press or router table. Sturdy jaws hold your workpiece to the full length of the clamp without any side-to-side play. Back-to-back clamps with the suitable accessories also let you manage your woodworking operations with a lot of versatility. Adjustable scale and two T-tracks allow you to use many accessories.
CMT part no: PGD-1 Precision Router Dado housing and grooving jig guide
PGD-1 ADJUSTABLE PRECISION ROUTER DADO JIG
The perfect tool for creting housing grooves, dados, rebates and joints. Easy to use and fully adjustable.
You can create groovess of any size using the same router by simply increasing the number of passes you make.
The Sturdy construction is built to last. Smooth rolling steel roller guides are ideal for easy handling and maneuverability.
Compatible with almost any portable router equipped with 30mm guide bush or by using the Bushing Template Guides included(a baseplate can be bought separately).
GUARANTEES CLEAN PRECISE GROOVES.
REQUIRED BUT NOT INCLUDED*
899.000.01 Universal Router Base
oppure
899.000.02 Perforated Router Base for CMT7E/CMT8E
* Not required for routers with 30mm bushing guide
RECOMMENDED BUT NOT INCLUDED
PGC PGC Straight Edge Clamp with graduated scale
see
CMPGC24 600mm
CMPGC36 900mm
CMPGC50 1200mm
CMT part no:999.505.10
** Please note this part number is just the orange jig itself **
For fast, easy and accurate cabinet & furniture construction. Designed by CMT and professional cabinetmakers, this new system allows you to make rock-solid pocket hole joints in stock 12,7mm (1/2?) to 40mm (1-5/8?) thick with unprecedented speed and accuracy.
The heart of the Pocket-Pro? system is our unique moulded jig, which features hardened drill bushings and an interlocking two-piece design. Sliding the jig up or down enables you to adjust the stock thickness in preset 1,6mm (1/16?) increments without test joints or measurements! If you have used other pocket hole jigs you will be familiar with many joint applications, but you will benefit from many Pocket-Pro? system advantages.
For example:
-Some jigs require adding or removing various parts-of the jig to join different- stock thicknesses. With the Pocket-Pro? system you simply-have to adjust the interlocking jig up or-down for the full range of joints-12,7mm (1/2?) to 40mm (1-5/8?) thick.
-Other jigs require frequent repositioning-of the depth stop collar-for different joint-styles. CMT?s Pocket-Pro? joinery system-allows you to make most of the adjustments leaving the stop-collar in the same position of the drill bit.
-Plus, with CMT?s Pocket-Pro? system you can quickly adjust the location of the pocket in relation to the end of your workpiece to create a stronger joint by using longer screws, or to leave more ?meat? in the joint.
CMT part no:PPJ-002
For fast, easy and accurate cabinet & furniture construction. Designed by CMT and professional cabinetmakers, this new system allows you to make rock-solid pocket hole joints in stock 12,7mm (1/2") to 40mm (1-5/8") thick with unprecedented speed and accuracy.
The heart of the Pocket-ProT system is our unique moulded jig, which features hardened drill bushings and an interlocking two-piece design. Sliding the jig up or down enables you to adjust the stock thickness in preset 1,6mm (1/16") increments without test joints or measurements! If you have used other pocket hole jigs you will be familiar with many joint applications, but you will benefit from many Pocket-ProT system advantages.
For example:
-Some jigs require adding or removing various parts-of the jig to join different- stock thicknesses. With the Pocket-ProT system you simply-have to adjust the interlocking jig up or-down for the full range of joints-12,7mm (1/2") to 40mm (1-5/8") thick.
-Other jigs require frequent repositioning-of the depth stop collar-for different joint-styles. CMT's Pocket-ProT joinery system-allows you to make most of the adjustments leaving the stop-collar in the same position of the drill bit.
-Plus, with CMT's Pocket-ProT system you can quickly adjust the location of the pocket in relation to the end of your workpiece to create a stronger joint by using longer screws, or to leave more "meat" in the joint.
Check out the Pocket-ProT joinery system today. Easy enough for the beginner and accurate enough for the pro, the Pocket-ProT is the world's most versatile pocket hole jig
CMT part no:CMT650
Perfect joints on kitchen worktops from 420mm to 650mm width.
The CMT650 is designed to cut kitchen worktop joints with any type of router. Letter code system for different operations makes the jig work much easier and very quick.
JIG INCLUDES:
-1 x phenolic template;
-3 x zinc-coated steel location bush;
-1 x adjustable end stop;
-1 x instruction manual.
JIG REQUIRES:
-a portable router;
-a ¥30mm guide bush;
-a ¥12mm TCT straight bit;
-two clamps.
CMT650 IS DESIGNED FOR ¥12MM STRAIGHT BITS:
-template made of stable and hardened material;
-for 45 degrees and 90 degrees joints;
-integrated templates for rounding over and chamfering edges;
-extra location bush for the worktop width of 600mm;
-two integrated templates for panel bolt recesses;
-delivered with a clear and comprehensive instruction manual.
CMT part no:999.110.00
Our quality bits have been designed for you, the professional craftsman, to allow you to confidently work at your best. CMT now offers even more possibilities with our professional router table: the perfect place to combine your skills and CMT quality.
The professional router table system has a strong and sturdy MDF laminate work surface measuring 80x60x2,5cm
for easy mobility when working. This free standing table sits at a comfortable height of 90cm on solid high gauge steel legs and weighs 26,5 kg.
The plate is already pre-bored for CMT routers CMT7E but is adaptable to all brands and models of routers on the market. Plate can also fit any router bit up to 98mm in diameter. Choose from our wide range of bits, including multi profile and molding bits or even kitchen bit set. Work easily and safely on this table
CMT part no:TMP-101 spare template for CMT System BTS-002 provides a fun and easy way for you to make divided bowls and trays in your shop. No lathe? No problem. This bowl making technique uses a router and CMT's unique bowl and tray router bit. The resulting bowls and trays are beautiful, and will leave your friends astonished! This kit also provides an excellent way to use up scrap wood. Glue pieces together, butcher block style, to make a beautiful pattern of colors and species
CMT part no:TMP-103 spare template for CMT System BTS-002 provides a fun and easy way for you to make divided bowls and trays in your shop. No lathe? No problem. This bowl making technique uses a router and CMT's unique bowl and tray router bit. The resulting bowls and trays are beautiful, and will leave your friends astonished! This kit also provides an excellent way to use up scrap wood. Glue pieces together, butcher block style, to make a beautiful pattern of colors and species
CMT part no:TMP-105
spare template for CMT System BTS-002 provides a fun and easy way for you to make divided bowls and trays in your shop. No lathe? No problem. This bowl making technique uses a router and CMT's unique bowl and tray router bit. The resulting bowls and trays are beautiful, and will leave your friends astonished! This kit also provides an excellent way to use up scrap wood. Glue pieces together, butcher block style, to make a beautiful pattern of colors and species
CMT part no:TMP-011
MDF template oval bowl TMP-011
Component of CMBTS-002
Please note that this is just ONE template - for both you need to also purchase CMTMP012
CMT part no:TMP-012
MDF template round tray TMP-012
Component of CMBTS-002
Please note that this is just ONE template - for both you need to also purchase CMTMP011
CMT part no:999.501.09 Phenolic Worktop
Phenloic worktop is 20mm thick and is far sturdier and more resistant to wear and warping than regular melamine surfaces. Features aluminium scales on both ends for quick and easy fence set up. Fast and easy bit change, CMT's useful bent wrench cm99100600 (optional) allows you to replace the bits from above quickly and easily. CMT7E Pre Bored plate cm9995010118: 298mm x 384mm x 12mm
and aluminium rings Dia. 103-69.5mm
Weight 15kg
*** PLEASE NOT THIS NOT A FULL ROUTER TABLE, IT IS A TABLE TOP INSERT PLATE ****
If you would like a Universal Plate (unbored for NON CMT routers) complete with aluminium rings Dia. 103-69.5mm please use part ref: CM99950126
CMT part no: PTC-1 Small Stock Holder
By far, handling small stock on your router table is probably one of the most difficult challenges any professional woodworker has to face! Keeping
all ten fingers attached to your hands is definitely a priority. This is why the CMT Small Stock Holder is an absolute necessity in the workshop!
It safely ensures proper stabilization of smaller work pieces throughout the routing process. The handle grips fitted with comfy silicone inserts keep
fingers and hands a safe distance from the blade while the anti-slip lining on both the center and right side base prevents slippage and ensures your workpiece stays put! Fully adjustable and easy to control, the CMT Small Stock Holder can manage small stock up to 216mm. (8-1/2") in width.
The perfect little jig for detail-oriented jobs!
CMT part no:CMT300-T190
Dovetail joints give a touch of craftsmanship to your work, but many woodworkers avoid these joints, because of their apparent
complexity. CMT's new 305mm dovetail jig is the fast easy solution! Thanks to precise templates, permanent stops and easy
adjustments, we have taken the "tinkering" out of dovetail joinery. Simply clamp your workpiece in with the edges against the
factory-set stops, set your bit depth and then you are ready to rout. Rest assured, we haven't cut corners on quality either.
This jig features a rugged steel body, templates, stops and clamping bars that together produce perfect long-lasting joints for
all your woodworking needs. The jig accepts stock from 11mm to 25mm in thickness and is capable of crafting a variety of
joints with the available templates. The jig comes with a template for 12.7mm half blind joints as well as a template guide.
Optional templates are available for through dovetail and box joints.