CMT part no:190.513.11
CMT 190 Up-Down Spiral bit for Mortising D-9.52 l-22.2 S-9.52 2+2
CMT's 190 series solid carbide up & downcut spiral bits are engineered for top-notch mortising in woodworking projects. These bits utilize a super-micrograin carbide formulation, ensuring sharp cutting edges, while the low-angle spiral design cleanly shears wood and efficiently ejects chips. Notably, they operate at lower temperatures, promoting extended edge durability. With enhanced feed rates and cutting quality, these tools excel in mortising applications, delivering a perfect finish on both the upper and lower workpiece surfaces. Perfect for use in solid wood, wood composites, plastics, and laminates, these bits are compatible with various machines, including CNC routers, hand-held routers, and more.
TECHNICAL DETAILS:
- Premium quality solid tungsten carbide
- 2+2 spiral cutting edges (Z2+2)
- Provides an excellent finish on both the upper and lower sides of the workpiece as the compression spiral is designed to shear cut into the work piece
APPLICATION: used for cutting, copying, panel sizing and any routing applications in solid wood, wood composites, plastic materials and laminates. Use a high feed speed on well-clamped
workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors
CMT part no:190.060.11
CMT 190 Solid Carbide Upcut and Downcut Spiral Router Bit
D=6 I=22 I1=8 L=60 S=6 Z=1+1
Technical details:
- Premium quality HWM.
- 1+1 spiral cutting edges [Z1+1].
- 2+2 spiral cutting edges [Z2+2].
- 3+3 spiral cutting edges [Z3+3].
- Provide an excellent finish on both the
upper and the lower side of the workpiece.
Application:
used for cutting, copying, panel sizing and any routing
application on solid wood, wood composites, plastic
materials and laminates. Use a high feed speed on wellclamped workpieces. Can be used on machining centres, point-to-point boring machines, CNC routers and
hand-held routers equipped with chucks or adapters
CMT part no:190.040.11
CMT 190 Solid Carbide Upcut and Downcut Spiral Router Bit
D=4 I=15 I1=7 L=50 S=4 Z1+1
Technical details:
- Premium quality HWM.
- 1+1 spiral cutting edges [Z1+1].
- 2+2 spiral cutting edges [Z2+2].
- 3+3 spiral cutting edges [Z3+3].
- Provide an excellent finish on both the
upper and the lower side of the workpiece.
Application:
used for cutting, copying, panel sizing and any routing
application on solid wood, wood composites, plastic
materials and laminates. Use a high feed speed on wellclamped workpieces. Can be used on machining centres, point-to-point boring machines, CNC routers and
hand-held routers equipped with chucks or adapters
CMT part no:190.050.11
CMT 190 Up-Down Spiral Bit Solid Tungsten Carbide
D=5 I=22 I1=8 S=5 L=60 S=5 Z=1+1
Technical details:
- Premium quality HWM.
- 1+1 spiral cutting edges [Z1+1].
- 2+2 spiral cutting edges [Z2+2].
- 3+3 spiral cutting edges [Z3+3].
- Provide an excellent finish on both the
upper and the lower side of the workpiece.
Application:
used for cutting, copying, panel sizing and any routing
application on solid wood, wood composites, plastic
materials and laminates. Use a high feed speed on wellclamped workpieces. Can be used on machining centres, point-to-point boring machines, CNC routers and
hand-held routers equipped with chucks or adapters
- Provides an excellent finish on both the upper and lower sides of the workpiece as the compression spiral is designed to shear cut into the work piece
- Provides an excellent finish on both the upper and lower sides of the workpiece as the compression spiral is designed to shear cut into the work piece
- Provides an excellent finish on both the upper and lower sides of the workpiece as the compression spiral is designed to shear cut into the work piece
- Provides an excellent finish on both the upper and lower sides of the workpiece as the compression spiral is designed to shear cut into the work piece
CMT part no:191.000.02
CMT is proud to offer you these new sets of high quality solid tungsten carbide upcut and downcut spiral bits in the most popular diametres. The new formulated super micrograin composition guarantees extremely sharp long-lasting cutting edges, whereas the spiral layout allows for a more efficient chip ejection. In addition these bits stay cooler during work and are suitable for CMT's new precision machines. Recommended for use on soft and hardwood, plywood, laminates, MDF and plastic materials. To be used on handheld routers
and CNC machines.
D=4,76/6,35/8/9,5/12,7
S=1/4 - 1/2" RH
CMT part no:191.000.01
CMT is proud to offer you these new sets of high quality solid tungsten carbide upcut and downcut spiral bits in the most popular diametres. The new formulated super micrograin composition guarantees extremely sharp long-lasting cutting edges, whereas the spiral layout allows for a more efficient chip ejection. In addition these bits stay cooler during work and are suitable for CMT's new precision machines. Recommended for use on soft and hardwood, plywood, laminates, MDF and plastic materials. To be used on handheld routers
and CNC machines.
D=4/6/8/10/12
S=8 RH