CMT Router Bits
(1267 Products)
Find the right CMT tool: Browse the 440 Page CMT 2022 Orange Tools Catalogue
BUILDING THE WORLD’S FINEST ROUTER BITS: CMT build on strong foundations - Times have changed and technology has completely altered the way things are done, in this regard CMT is no exception. CMT facilities have been newly renovated and our equipment today represents the most advanced technology available on the market, but we still make and will continue to make routers and boring bits with all the skill and care that we always have. Essentially, the main components of a router bit are just two: steel and carbide. If either of these is less than the best, the tool we make will show it. CMT have researched steel and carbide since the beginning, and found exactly what is needed:
Superior Steel. All our steel comes from right above the border, in Switzerland, where they use an exclusive hot drawing process to forge the solid bar stock we use to manufacture our router bit shanks & bodies. The result is steel that is superior in strength and exceptionally resistant to fatigue and abrasion
High-Grade Tungsten Carbide. The capacity of the carbide tip to cut precisely and to last a long time is critical for the performance of any tool, so at CMT we use only premium micrograin carbide from Luxembourg to make the tips for our router bits.
-
Masterpack - Bulk pack of 10 Router cutters D=1/2" L=2" S=1/2"Lead Time: 22 DaysList £410.40£242.00Inc Vat £290.40 -
-
-
CMT part no: 955.803.11MF 2 Piece Glass Panel Bit Set Hm S=12 D=41.5Lead Time: 22 DaysList £114.00£72.00Inc Vat £86.40 -
-
CMT part no:800.624.11 These new bit sets are excellent for producing adjustable tongue and groove joints with a bevel, in ord...In StockList £247.20£146.00Inc Vat £175.20 -
CMT part no:815.002.11 Hw V-grooving Bi for Aluminium Composite Material (ACM) panels can be shaped using a very simple proce...In StockList £51.60£32.00Inc Vat £38.40 -
CMT part no:815.001.11 Hw V-grooving Bi for Aluminium Composite Material (ACM) panels can be shaped using a very s...In StockList £48.00£30.00Inc Vat £36.00 -
-
-
-
- D = 12.7 mm
- L = 58.1
- l = 11 mm
Lead Time: 22 DaysList £157.20£99.00Inc Vat £118.80 -
CMT part no:140.720.61 CMT 140 PCD Router Cutter With 45> Shear Angle D=20x25x85 S=20x50 Z1+1 RH Technical detail: S...Lead Time: 22 DaysList £369.60£125.00Inc Vat £150.00 -
CMT part no:140.721.61 CMT 140 PCD Router Cutter With 45> Shear Angle D=20x35x95 S=20x50 Z1+1 RH ...Lead Time: 22 DaysList £493.20£156.00Inc Vat £187.20 -
CMT part no:140.722.61 CMT 140 PCD Router Cutter With 45> Shear Angle D=20x45x105 S=20x50 Z1+1 RH ...Lead Time: 22 DaysList £615.60£195.00Inc Vat £234.00 -
- - Super strength steel
- - DP/PCD cutting edge
- - HM plunging tip for diagonal plunge-cutting (Z-axis tool entrance)
In StockList £117.60£40.00Inc Vat £48.00 -
- - Super strength steel
- - DP/PCD cutting edge
- - HM plunging tip for diagonal plunge-cutting (Z-axis tool entrance)
In StockList £117.60£40.00Inc Vat £48.00 -
- - Super strength steel
- - DP/PCD cutting edge
- - HM plunging tip for diagonal plunge-cutting (Z-axis tool entrance)
In StockList £156.00£53.00Inc Vat £63.60 -
- - Super strength steel
- - DP/PCD cutting edge
- - HM plunging tip for diagonal plunge-cutting (Z-axis tool entrance)
In StockList £117.60£40.00Inc Vat £48.00 -
- - Super strength steel
- - DP/PCD cutting edge
- - HM plunging tip for diagonal plunge-cutting (Z-axis tool entrance)
Lead Time: 22 DaysList £156.00£53.00Inc Vat £63.60 -
- - Super strength steel
- - DP/PCD cutting edge
- - HM plunging tip for diagonal plunge-cutting (Z-axis tool entrance)
In StockList £117.60£40.00Inc Vat £48.00 -
- - Super strength steel
- - DP/PCD cutting edge
- - HM plunging tip for diagonal plunge-cutting (Z-axis tool entrance)
In StockList £194.40£66.00Inc Vat £79.20 -
- - Super strength steel
- - DP/PCD cutting edge
- - HM plunging tip for diagonal plunge-cutting (Z-axis tool entrance)
In StockList £117.60£40.00Inc Vat £48.00 -
- - Super strength steel
- - DP/PCD cutting edge
- - HM plunging tip for diagonal plunge-cutting (Z-axis tool entrance)
Lead Time: 22 DaysList £156.00£53.00Inc Vat £63.60 -
- - Super strength steel
- - DP/PCD cutting edge
- - HM plunging tip for diagonal plunge-cutting (Z-axis tool entrance)
In StockList £117.60£40.00Inc Vat £48.00 -
- - Super strength steel
- - DP/PCD cutting edge
- - HM plunging tip for diagonal plunge-cutting (Z-axis tool entrance)
In StockList £156.00£53.00Inc Vat £63.60 -
- - Super strength steel
- - DP/PCD cutting edge
- - HM plunging tip for diagonal plunge-cutting (Z-axis tool entrance)
In StockList £194.40£66.00Inc Vat £79.20 -
- - Super strength steel
- - DP/PCD cutting edge
- - HM plunging tip for diagonal plunge-cutting (Z-axis tool entrance)
Lead Time: 22 DaysList £117.60£40.00Inc Vat £48.00 -
- - Super strength steel
- - DP/PCD cutting edge
- - HM plunging tip for diagonal plunge-cutting (Z-axis tool entrance)
In StockList £194.40£66.00Inc Vat £79.20 -
- - Super strength steel
- - DP/PCD cutting edge
- - HM plunging tip for diagonal plunge-cutting (Z-axis tool entrance)
In StockList £117.60£40.00Inc Vat £48.00 -
- - Super strength steel
- - DP/PCD cutting edge
- - HM plunging tip for diagonal plunge-cutting (Z-axis tool entrance)
In StockList £156.00£53.00Inc Vat £63.60 -
- - Super strength steel
- - DP/PCD cutting edge
- - HM plunging tip for diagonal plunge-cutting (Z-axis tool entrance)
In StockList £194.40£66.00Inc Vat £79.20 -
- - Super strength steel
- - DP/PCD cutting edge
- - HM plunging tip for diagonal plunge-cutting (Z-axis tool entrance)
In StockList £234.00£79.00Inc Vat £94.80 -
CMT part no: 141.300.61 Straight Bit Z1 Neg. Dp S=10 D=10x15x65 DxIn StockList £194.40£66.00Inc Vat £79.20 -
CMT part no: 141.320.61 Straight Bit Z1 Neg. Dp S=12 D=12x20x70 DxIn StockList £249.60£85.00Inc Vat £102.00 -
CMT part no: 141.260.61 Straight Bit Z1 Neg. Dp S=6 D=6x10x60 DxIn StockList £136.80£46.00Inc Vat £55.20 -
CMT part no: 141.280.61 Straight Bit Z1 Neg. Dp S=8 D=8x15x65 DxIn StockList £178.80£61.00Inc Vat £73.20 -
- Super strength steel
- DP/PCD cutting edge
- Resharpenable cutter (max 3 times)
In StockList £156.00£53.00Inc Vat £63.60 -
- Super strength steel
- DP/PCD cutting edge
- Resharpenable cutter (max 3 times)
In StockList £100.80£34.00Inc Vat £40.80 -
- Super strength steel
- DP/PCD cutting edge
- Resharpenable cutter (max 3 times)
Lead Time: 22 DaysList £120.00£41.00Inc Vat £49.20 -
CMT part no:142.720.61 CMT 142 PCD Router Cutter With 20> Shear Angle D=20x25x85 S=20 Z2+2 RH T...Lead Time: 22 DaysList £363.60£123.00Inc Vat £147.60 -
- Super strength steel
- DP/PCD cutting edge
- Resharpenable cutter (max 3 times)
In StockList £234.00£79.00Inc Vat £94.80 -
CMT part no:142.721.61 CMT 142 PCD Router Cutter With 20> Shear Angle D=20x30x90 S=20x45 Z2+2 RH T...In StockList £453.60£144.00Inc Vat £172.80 -
CMT part no:142.722.61 CMT 142 PCD Router Cutter With 20> Shear Angle D=20x35x95 S=20x45 Z2+2 RH T...In StockList £544.80£173.00Inc Vat £207.60 -
- Super strength steel
- DP/PCD cutting edge
- Resharpenable cutter (max 3 times)
Lead Time: 22 DaysList £312.00£105.00Inc Vat £126.00 -
CMT part no:142.723.61 CMT 142 PCD Router Cutter With 20> Shear Angle D=20x40x100 S=20x45 Z2+2 RH T...In StockList £636.00£201.00Inc Vat £241.20 -
- Super strength steel
- DP/PCD cutting edge
- Resharpenable cutter (max 3 times)
In StockList £388.80£132.00Inc Vat £158.40 -
CMT part no:142.724.61 CMT 142 PCD Router Cutter With 20> Shear Angle D=20x45x105 S=20x45 Z2+2 RH T...Lead Time: 22 DaysList £726.00£230.00Inc Vat £276.00