CMT Slot Cutters
(135 Products)Find the right CMT tool: Browse the 440 Page CMT Orange Tools Catalogue
-
CMT part no:823.001.11 Create slots, grooves and rabbets on all materials using the CMT slot cutter sets. Ideal for biscuit and tongue and groove joints. These sets include 4 different bearings to allow a cutting depth of 7,95mm, 9,5mm, 12,8mm and 14,3mm. Please refer to the chart below for applications and the correct cutter combinations. Safety tips: never use the slot cutter sets without shims between cutters, whose distance can vary from 1mm to 1,7mm. Shims can also be positioned between the ball bearings and the cutters.In Stock
-
CMT part no:822.316.11B Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:822.320.11B Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:822.324.11B Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:822.332.11B Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:822.340.11B Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:822.348.11B Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.In Stock
-
CMT part no:822.360.11B Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:822.364.11B Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.In Stock
-
CMT part no:822.320.11A Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:822.324.11A Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:822.332.11A Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:822.340.11A Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.In Stock
-
CMT part no:822.348.11A Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:822.360.11A Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:822.364.11A Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:823.332.11B The possible uses of this bit are almost: you can rout grooves and ribates, T or dovetail joints on wood panels. Each bit has three carbide tipped cutters and has an orange coloured PTFE coating, it features anti-kickback design too. The 22mm bearing is included for a cutting depth of 12,8mm. The bit and the slot cutter are available also separately.In Stock
-
CMT part no:823.340.11B The possible uses of this bit are almost: you can rout grooves and ribates, T or dovetail joints on wood panels. Each bit has three carbide tipped cutters and has an orange coloured PTFE coating, it features anti-kickback design too. The 22mm bearing is included for a cutting depth of 12,8mm. The bit and the slot cutter are available also separately.In Stock
-
CMT part no:823.364.11B The possible uses of this bit are almost: you can rout grooves and ribates, T or dovetail joints on wood panels. Each bit has three carbide tipped cutters and has an orange coloured PTFE coating, it features anti-kickback design too. The 22mm bearing is included for a cutting depth of 12,8mm. The bit and the slot cutter are available also separately.In Stock
-
CMT part no:923.001.11 Create slots, grooves and rabbets on all materials using the CMT slot cutter sets. Ideal for biscuit and tongue and groove joints. These sets include 4 different bearings to allow a cutting depth of 7,95mm, 9,5mm, 12,8mm and 14,3mm. Please refer to the chart below for applications and the correct cutter combinations. Safety tips: never use the slot cutter sets without shims between cutters, whose distance can vary from 1mm to 1,7mm. Shims can also be positioned between the ball bearings and the cutters.In Stock