Elesa
(690 Products)
Elesa machine spare parts
-
-
DD52R-AN-000.50-S-C3 Grey Anticlockwise horizontal shaft indicator 000.50 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £76.80£59.00Inc Vat £70.80 -
DD52R-AN-000.50-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 000.50 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £79.20£60.00Inc Vat £72.00 -
DD52R-FN-000.50-S-C3 Grey Anticlockwise horizontal shaft indicator 000.50 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £76.80£59.00Inc Vat £70.80 -
DD52R-FN-000.50-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 000.50 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £79.20£60.00Inc Vat £72.00 -
DD52R-AN-0001.0-S-C3 Grey Anticlockwise horizontal shaft indicator 0001.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £76.80£59.00Inc Vat £70.80 -
DD52R-AN-0001.0-S-C3 Grey+RB Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Anticlockwise horizontal shaft indicator 0001.0 per revolutionLead Time: 6 DaysList £79.20£60.00Inc Vat £72.00 -
DD52R-FN-0001.0-S-C3 Grey Anticlockwise horizontal shaft indicator 0001.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £76.80£59.00Inc Vat £70.80 -
DD52R-FN-0001.0-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 0001.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £79.20£60.00Inc Vat £72.00 -
DD52R-AN-0002.0-S-C3 Grey Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Anticlockwise horizontal shaft indicator 0002.0 per revolutionLead Time: 6 DaysList £76.80£59.00Inc Vat £70.80 -
DD52R-AN-0002.0-S-C3 Grey+RB Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Anticlockwise horizontal shaft indicator 0002.0 per revolutionLead Time: 6 DaysList £79.20£60.00Inc Vat £72.00 -
DD52R-FN-0002.0-S-C3 Grey Anticlockwise horizontal shaft indicator 0002.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £76.80£59.00Inc Vat £70.80 -
DD52R-FN-0002.0-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 0002.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £79.20£60.00Inc Vat £72.00 -
DD52R-AN-0002.5-S-C3 Grey Anticlockwise horizontal shaft indicator 0002.5 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £76.80£59.00Inc Vat £70.80 -
DD52R-AN-0002.5-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 0002.5 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £79.20£60.00Inc Vat £72.00 -
DD52R-FN-0002.5-S-C3 Grey Anticlockwise horizontal shaft indicator 0002.5 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £76.80£59.00Inc Vat £70.80 -
DD52R-FN-0002.5-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 0002.5 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £79.20£60.00Inc Vat £72.00 -
DD52R-AN-0003.0-S-C3 Grey Anticlockwise horizontal shaft indicator 0003.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £76.80£59.00Inc Vat £70.80 -
DD52R-AN-0003.0-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 0003.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £79.20£60.00Inc Vat £72.00 -
DD52R-FN-0003.0-S-C3 Grey Anticlockwise horizontal shaft indicator 0003.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £76.80£59.00Inc Vat £70.80 -
DD52R-FN-0003.0-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 0003.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £79.20£60.00Inc Vat £72.00 -
DD52R-AN-0004.0-S-C3 Grey Anticlockwise horizontal shaft indicator 0004.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £76.80£59.00Inc Vat £70.80 -
DD52R-AN-0004.0-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 0004.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £79.20£60.00Inc Vat £72.00 -
DD52R-FN-0004.0-S-C3 Grey Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Anticlockwise horizontal shaft indicator 0004.0 per revolutionLead Time: 6 DaysList £76.80£59.00Inc Vat £70.80 -
DD52R-FN-0004.0-S-C3 Grey+RB Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Anticlockwise horizontal shaft indicator 0004.0 per revolutionLead Time: 6 DaysList £79.20£60.00Inc Vat £72.00 -
DD52R-AN-0005.0-S-C3 Grey Anticlockwise horizontal shaft indicator 0005.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £76.80£59.00Inc Vat £70.80 -
DD52R-AN-0005.0-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 0005.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £79.20£60.00Inc Vat £72.00 -
DD52R-FN-0005.0-S-C3 Grey Anticlockwise horizontal shaft indicator 0005.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £76.80£59.00Inc Vat £70.80 -
DD52R-FN-0005.0-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 0005.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digitsLead Time: 6 DaysList £79.20£60.00Inc Vat £72.00 -
DD52R-AN-0006.0-S-C3 Grey Anticlockwise horizontal shaft indicator 0006.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £76.80£59.00Inc Vat £70.80 -
DD52R-AN-0006.0-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 0006.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £79.20£60.00Inc Vat £72.00 -
DD52R-FN-0006.0-S-C3 Grey Anticlockwise horizontal shaft indicator 0006.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £76.80£59.00Inc Vat £70.80 -
DD52R-FN-0006.0-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 0006.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £79.20£60.00Inc Vat £72.00 -
DD52R-AN-001.00-S-C3 Grey Anticlockwise horizontal shaft indicator 001.00 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £76.80£59.00Inc Vat £70.80 -
DD52R-AN-001.00-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 001.00 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £79.20£60.00Inc Vat £72.00 -
DD52R-FN-001.00-S-C3 Grey Anticlockwise horizontal shaft indicator 001.00 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £76.80£59.00Inc Vat £70.80 -
DD52R-FN-001.00-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 001.00 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £79.20£60.00Inc Vat £72.00 -
DD52R-AN-0010.0-S-C3 Grey Anticlockwise horizontal shaft indicator 0010.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £76.80£59.00Inc Vat £70.80 -
DD52R-AN-0010.0-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 0010.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £79.20£60.00Inc Vat £72.00 -
DD52R-FN-0010.0-S-C3 Grey Anticlockwise horizontal shaft indicator 0010.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £76.80£59.00Inc Vat £70.80 -
DD52R-FN-0010.0-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 0010.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList £79.20£60.00Inc Vat £72.00
