Kluber Lubrication
(65 Products)
We can supply the complete range of Kluber lubrication: Centoplex, Asonic grease and Isoflex Kluber grease and lubricants for your woodworking needs. With years of experience selling the very best industrial machinery, we supply the best woodworking brands to help increase the longevity of your machinery.
What are Kluber Lubricants?
Klüber Lubrication offers a selection of high-performance grease and oils that will help you to maintain your equipment and keep it running smoothly. Kluber lubrication offers sufficient protection against wear and tear, rusting parts and general performance protection and is specified for high performance applications.
-
![Kluberfood NH1 94-6000 Synthetic Grease [370g]](https://www.scosarg.com/media/catalog/product/cache/b651487a9880ca73f3ee740c9aa9f44d/k/i/kinh1946000.jpg)
Synthetic fluid gear grease for the food processing and pharmaceutical industries. Klüberfood NH1 94-6000 is a fluid grease based on a highly refined synthetic hydrocarbon and a special calcium complex soap thickener. Klüberfood NH1 94-6000 is NSF H1 registered and therefore complies with FDA 21 CFR ? 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberfood NH1 94-6000 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP. Due to its special composition, Klüberfood NH1 94-6000 offers an unusual combination of performance characteristics. The special thickener provides very good wear protection even at the very soft consistency of NLGI 000. At the same time, Klüberfood NH1 94-6000 offers excellent corrosion protection along with good water resistance. This combination of special synthetic base materials enables optimum lubricant supply to the friction point also at low temperatures.In Stock£130.00£156.00 -
Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries Application Klüber Klüberoil 4 UH1-460 N Klüberoil 4 UH1 N was developed for the lubrication of spur, bevel and worm gears subject to high loads, bearings, spindles, joints as well as lifting, drive and transport chains. Klüberoil 4 UH1 N is a synthetic high-performance gear and multipurpose oil based on polyalphaolefin satisfying the growing requirements and increasing power density of modern gears. Klüberoil 4 UH1 N is based on high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components. Klüberoil 4 UH1 N is registered as NSF H1 for use in the food-processing and pharmaceutical industries and complies with FDA 21 CFR Sec 178.3570. It was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberoil 4 UH1 N can contribute to increase reliability of your production processes. Nevertheless it is recommended to conduct an additional risk analysis, e.g. HACCP. Klüberoil 4 UH1 N is certified according to ISO 21469, thus supporting compliance with hygienic requirements of your production. You will find further information about ISO Standard 21469 on our website www.klueber.com. Klüberoil 4 UH1 N from ISO VG 68 to 680 clearly exceeds CLP requirements according to DIN 51517-3. Corresponding gears can be switched to Klüberoil 4 UH1 N without prior consultation provided the general application notes are observed. Gears are sufficiently protected against scuffing even at extremely high peak loads, vibrations or oscillations, or if no running-in was performed. The good wear protection of both gears and rolling bearings ensures that the service life calculated for the lubricated components is achieved, leading to lower maintenance and repair costs. Klüberoil 4 UH1 N offers a much longer service life than mineral and white oils due to the excellent ageing and oxidation resistance of the selected raw materials; thus service intervals can be extended and maintenance costs reduced. In certain applications, even lifetime lubrication is possible. The product's low foaming tendency and anti-corrosive properties enable problem-fr_FRee gear operation. Oil leakage leading to contamination is prevented due to the good compatibility with elastomers. The good viscosity-temperature behaviour supports the formation of a sufficient lubricant film across a wide service temperature range, even at elevated and high temperatures. Therefore, a single viscosity grade can cover both low and high temperatures in many applications. The optimised friction behaviour enabled by the carefully selected base oils reduces power loss and improves gear efficiency. Klüberoil 4 UH1 N is approved by SEW Eurodrive, Getriebebau Nord, Stöber Antriebstechnik, Lenze, Sumitomo, Bonfiglioli, Brevini, STM, Watt Drive, etc.Lead Time: 22 Days£165.00£198.00 -
Easy assembly and disassembly of highly loaded frictional connections Prevents premature material ageing caused by tribo-corrosion and stick slip Can be used with many material combinations, including plastics and elastomers Klüberpaste 46 MR 401 is a multipurpose lubricating paste with selected base oils, lithium soap and special solid lubricant additives. This versatile multipurpose paste has a wide service temperature range and shows good pressure absorption capacity as well as neutral behaviour towards non-ferrous metals, many plastics and elastomers.Lead Time: 22 Days£120.00£144.00 -
Easy assembly and disassembly of highly loaded frictional connections Prevents premature material ageing caused by tribo-corrosion and stick slip Can be used with many material combinations, including plastics and elastomers MOQ 25 Klüberpaste 46 MR 401 is a multipurpose lubricating paste with selected base oils, lithium soap and special solid lubricant additives. This versatile multipurpose paste has a wide service temperature range and shows good pressure absorption capacity as well as neutral behaviour towards non-ferrous metals, many plastics and elastomers.In Stock£25.00£30.00 -
Low lubricant costs for initial and relubrication due to thin lubricant films Good wear and corrosion protection helps reduce assembly forces and screw torques and prevents tribo- and fretting corrosion High pressure absorption capacity enables constant high clamping forces and consequently ensures properly fixed tools or workpieces in machine tool chucks. MOQ 12 Klüberpaste ME 31-52 is a white/beige lubricating paste on the basis of mineral oil, calcium complex soap and inorganic solid lubricants. Besides its application as a universal assembly paste, this product offers benefits especially in friction points with small to minimum motion under high static and dynamic loadsLead Time: 22 Days£228.00£273.60 -
Low lubricant costs for initial and relubrication due to thin lubricant films Good wear and corrosion protection helps reduce assembly forces and screw torques and prevents tribo- and fretting corrosion High pressure absorption capacity enables constant high clamping forces and consequently ensures properly fixed tools or workpieces in machine tool chucks. MOQ 25 Klüberpaste ME 31-52 is a white/beige lubricating paste on the basis of mineral oil, calcium complex soap and inorganic solid lubricants. Besides its application as a universal assembly paste, this product offers benefits especially in friction points with small to minimum motion under high static and dynamic loadsLead Time: 22 Days£50.00£60.00 -
Klüberplex BEM 41-141 offers good pressure and wear resistance and does not contain any inorganic solid lubricants like MoS2 or graphite. Due to its good compatibility with commercial sealing materials, the grease can be used for a wide range of applications. Benefits for your application Trouble-free operation due to wide service temperature with good pumbability and metering via centralised lubrication systems Longer service life of rolling bearings due to good wear protection characteristics also under vibration conditions Higher reliability of wind power stations due to good grease distribution and oil separation Low frictional resistance and reduced component temperature Reduced wear due to excellent lubricity Easy changeover to Klüberplex BEM 41-141 as the lubricant is miscible with other greasesIn Stock£75.00£90.00 -
Klüberquiet BQ 72-72 is made up of an ester oil, a polyurea thickener and special additives. These components have been combined such that Klüberquiet BQ 72-72 offers many advantages for the lubrication of rolling bearings: extremely low-noise operation shown on special test rigs, e.g. SKF BeQuiet+ long bearing life due to optimised wear protection and a thermally stable, synthetic grease good compatibility with elastomers (data available on request) wide service temperature range and good low-temperature performance Benefits for your application Long-term operation due to optimised wear protection and smooth running Wide service temperature range allows a variety of applications Cost savings due to long service life of grease Particularly suitable for lifetime-lubricated capped or sealed deep groove ball bearingsIn Stock -
The Klübersynth CH 2 series oils were developed for the lubrication of drive, control and conveyor chains operating at high temperatures. Applications of this kind are found, for example, in the surface treatment and coating of industrial goods. Other possible applications are: conveyors used by automotive suppliers, metalworking companies, furniture and white goods makers; driers, e.g. for gypsum boards. Performance, Features & Benefits of Klüber Klübersynth CH 2-100 N are: Synthetic ester oil for low continuous relubrication quantities at high temperatures up to 250 degreesC Good wear protection results in extended chain life even at temperatures above 200 degreesC Clean chains and easy relubrication due to low residue formation No mechanical cleaning of chains required Low energy consumption due to low chain friction and good lubricant film formation Paint-compatible raw materials to avoid paint defects and reworkingLead Time: 22 Days£155.00£186.00 -
The Klübersynth CH 2 series oils were developed for the lubrication of drive, control and conveyor chains operating at high temperatures. Applications of this kind are found, for example, in the surface treatment and coating of industrial goods. Other possible applications are: conveyors used by automotive suppliers, metalworking companies, furniture and white goods makers; driers, e.g. for gypsum boards. Performance, Features & Benefits of Klüber Klübersynth CH 2-100 N are: Synthetic ester oil for low continuous relubrication quantities at high temperatures up to 250 degreesC Good wear protection results in extended chain life even at temperatures above 200 degreesC Clean chains and easy relubrication due to low residue formation No mechanical cleaning of chains required Low energy consumption due to low chain friction and good lubricant film formation Paint-compatible raw materials to avoid paint defects and reworkingLead Time: 22 Days£999.00£1,198.80 -
The Klübersynth CH 2 series oils were developed for the lubrication of drive, control and conveyor chains operating at high temperatures. Applications of this kind are found, for example, in the surface treatment and coating of industrial goods. Other possible applications are: conveyors used by automotive suppliers, metalworking companies, furniture and white goods makers; driers, e.g. for gypsum boards. Performance, Features & Benefits of Klüber Klübersynth CH 2-100 N are: Synthetic ester oil for low continuous relubrication quantities at high temperatures up to 250 degreesC Good wear protection results in extended chain life even at temperatures above 200 degreesC Clean chains and easy relubrication due to low residue formation No mechanical cleaning of chains required Low energy consumption due to low chain friction and good lubricant film formation Paint-compatible raw materials to avoid paint defects and reworkingLead Time: 22 Days£348.00£417.60 -
The Klübersynth CH 2 series oils were developed for the lubrication of drive, control and conveyor chains operating at high temperatures. Applications of this kind are found, for example, in the surface treatment and coating of industrial goods. Other possible applications are: conveyors used by automotive suppliers, metalworking companies, furniture and white goods makers; driers, e.g. for gypsum boards. Performance, Features & Benefits of Klüber Klübersynth CH 2-100 N are: Synthetic ester oil for low continuous relubrication quantities at high temperatures up to 250 degreesC Good wear protection results in extended chain life even at temperatures above 200 degreesC Clean chains and easy relubrication due to low residue formation No mechanical cleaning of chains required Low energy consumption due to low chain friction and good lubricant film formation Paint-compatible raw materials to avoid paint defects and reworkingLead Time: 22 Days£115.00£138.00 -
Synthetic ester oil for low continuous relubrication quantities at high temperatures up to 250 degreesC Good wear protection results in extended chain life even at temperatures above 200 degreesC Clean chains and easy relubrication due to low residue formation No mechanical cleaning of chains required Low energy consumption due to low chain friction and good lubricant film formation Paint-compatible raw materials to avoid paint defects and reworking All chain users aim at minimising lubricant consumption volumes to enhance their profitability. At the same time, they expect good wear protection and low residue formation to keep maintenance costs low. Our synthetic ester oils clearly meet these requirements. With our Klübersynth CH 2 series, we have found the right solution for you.Lead Time: 22 Days£85.00£102.00 -
The Klübersynth CH 2 series oils were developed for the lubrication of drive, control and conveyor chains operating at high temperatures. Applications of this kind are found, for example, in the surface treatment and coating of industrial goods. Other possible applications are: conveyors used by automotive suppliers, metalworking companies, furniture and white goods makers; driers, e.g. for gypsum boards. Performance, Features & Benefits of Klüber Klübersynth CH 2-100 N are: Synthetic ester oil for low continuous relubrication quantities at high temperatures up to 250 degreesC Good wear protection results in extended chain life even at temperatures above 200 degreesC Clean chains and easy relubrication due to low residue formation No mechanical cleaning of chains required Low energy consumption due to low chain friction and good lubricant film formation Paint-compatible raw materials to avoid paint defects and reworkingLead Time: 22 Days£82.00£98.40
![Kluberfood NH1 94-6000 Synthetic Grease [370g]](https://www.scosarg.com/media/amasty/amlabel/KLUEBER.png "Kluberfood NH1 94-6000 Synthetic Grease [370g]")
![Kluberfood NH1 94-6000 Synthetic Grease [370g]](https://www.scosarg.com/media/amasty/amlabel/1madeinGERMANY.jpg "Kluberfood NH1 94-6000 Synthetic Grease [370g]")
