Minimax ME28T Edgebander

The Minimax ME28T Automatic edge bander with glue pot and pre-milling unit has great flexibility, with melamine edges, PVC and ABS up to 3 mm and wooden strips up to 5 mm.

- control panel on machine infeed side
- machine frame made of high rigidity ribbed steel to guarantee an excellent
support for the operating units
- top thick steel pressure beam with rubber coated wheels
- exclusive feed truck
- manual adjustment of top beam with automatic positioning of the operating
units according to the selected panel thickness
- numeric indicator of the selected panel thickness
- glue smokes specific exhaust outlet; centralized extraction of the other dusts
- panel support roller which can be extended on the entire length of the machine
- safety enclosure
- electrical cabinet with PLC, padlockable main switch and overload protection
- emergency push buttons

Complete with 1 diamond tools, 80 mm diameter. It allows a very good panel finish and linearity during pre-machining. It is equipped with exhaust hood and a air blower which cleans the panel from dust and chips.
4 possible removals: 0,5 -1 -1,5 - 2 mm thickness.
It is possible to carry out vertical adjustments of the tool to use it even in the final sharpening phase.
N.B. In order to have the best result, the adjusted removal must be not higher than the applied edge.

It isn't indicated for the machining with "Formica" edge.

complete with:
- hot melt glue with quick heat up system and internally teflon coated to allow an easy glue replacement
- glue application on the panel by means of glue spreading roller
- temperature adjustment of the applied glue integrated in the PLC control
- device for automatic recovery of unused glue
- automatic edge loading system for rolled edges with shear device for 3 mm max. thickness edges
- coil holder plate, 730 mm diameter
- pressing unit with n. 2 steel edge pressure rollers
- adjustable infeed fence with numeric readout
- automatic lowering of the glue pot temperature after a temporary non-use of the machine

Simple and intuitive
Error-free machining is ensured by the control panel positioned on the front of the machine, that allows an easy selection of all the main functions, among them, the operating units switching on and off. The PLC guides the operator during maintenance, cleaning, diagnostic operations, etc.

With motor for 90° end cutting of front and rear exceeding edge.
The blade alignment with reference to the cutting point is carried out using a new copying device which ensures a constant and precise cutting under any working condition.

Equipped with vertical copying pads for an accurate positioning of tools with reference to the cutting point.
The unit is provided with 72 mm diameter, combined cutters: the radius part of the cutter is used to trim 2 mm radius edges and chamfered thin edges. The straight part of the cutter is used for the trimming of edges in wood up to 5 mm. Changing from radius edge to edge in wood is done easily moving the cutters axially. The edge thickness is shown by 2 numeric readouts.

For the finishing of 3 mm PVC/ABS edges.
It assures an excellent vibration free finish thanks to its high rigidity structure.
High working precision thanks to the horizontal and vertical copying pads (with chrome plated surfaces), which assure an accurate positioning of the knives in relation to the cutting point.

With two independent motors for the cleaning and polishing of the edge.
Tilted, vertically adjustable motors to optimize the cleaning/polishing action.
Minimax logo
  • approximate lead time: 45 days
  • Part Number: SAME28T
£ Enquire
Lease from only
£60.80 per week

Leasing plans are for
UK businesses only
and subject to status

Product Description
  • Work table dimensions 2900 x 570 mm
  • Work table height 904 mm
  • Min - max. thickness of rolled edges 0,4 - 3 mm
  • Max. thickness of edges in strips Up to 5 mm
  • Min - max. panel height 12 - 50 mm
  • Min - max. panel height using edge scraping unit 16 - 50 mm
  • Min. panel length/width 190/110 mm
  • Min. panel length cut only on the front 120 mm
  • Feed speed 7 m/min
  • Feed motor power S1 0.55kw
  • Pneumatic operating pressure 6.5 bar
  • Exhaust outlet diameter (base) 120 mm
  • Exhaust outlet diameter (glue pot) 60 mm
  • Operating temperature 20 - 190c
  • Premilling unit
  • Motor power S1 2.2 kw
  • Blade rotation speed 9000 rpm
  • No. 1 diamond cutter D 80mm x H56mm x Z2
  • ---------------------------------------------------------------
  • _________________
  • 58.03.54 Automatic loading device for edges in strips
  • 58.05.90 Device for heating the edge of the panel
  • 58.03.55 Tools kit radius 3 mm instead of radius 2 mm
  • It replaces all 2 mm radius tools supplied as standard
  • (trimmer and edge scraper) with 3 mm ones
  • ____________________
  • 58.05.28 Pair of cutters for trimmers R =3mm
  • 58.05.25 Pair of cutters for trimmers R =2mm
  • 58.05.27 Pair of cutters for edge scraping unit R =3mm
  • 58.05.26 Pair of cutters for edge scraping unit R =2mm
  • 58.05.42 Diamond cutters for pre-milling unit
Additional Information
Additional Information
Part Number SAME28T
Manufacturer Minimax

Write Your Own Review

You're reviewing: Minimax ME28T Edgebander

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Your Rating
You may also be interested in the following product(s)
Ardesia Silver Dry Filter Spray Booth 2m Ardesia Silver Dry Filter Spray Booth 2m

Was: £4,726.80

Now Only Excl. VAT: £3,500.00 Incl. VAT: £4,200.00

Ardesia Single Water Wash Spray Booth 2m Ardesia Single Water Wash Spray Booth 2m

Was: £5,706.00

Now Only Excl. VAT: £4,355.00 Incl. VAT: £5,226.00

Ardesia Single Water Wash Spray Booth 3m Ardesia Single Water Wash Spray Booth 3m

Was: £7,572.00

Now Only Excl. VAT: £5,750.00 Incl. VAT: £6,900.00