Drop in for a coffee and look round our showroom just south of London. If you need to contact us: send us an email >>

Minimax ME28T Edgebander

Part Number
SAME28T
The Minimax ME28T SP Automatic edge bander with glue pot and pre-milling unit has great flexibility, with melamine edges, PVC and ABS up to 3 mm and wooden strips up to 5 mm.

GENERAL FEATURES
- control panel on machine infeed side
- machine frame made of high rigidity ribbed steel to guarantee an excellent
support for the operating units
- top thick steel pressure beam with rubber coated wheels
- exclusive feed truck
- manual adjustment of top beam with automatic positioning of the operating
units according to the selected panel thickness
- numeric indicator of the selected panel thickness
- glue smokes specific exhaust outlet; centralized extraction of the other dusts
- panel support roller which can be extended on the entire length of the machine
- safety enclosure
- electrical cabinet with PLC, padlockable main switch and overload protection
- emergency push buttons

PRE-MILLING UNIT (STD)
Complete with 1 diamond tools, 80 mm diameter. It allows a very good panel finish and linearity during pre-machining. It is equipped with exhaust hood and a air blower which cleans the panel from dust and chips.
4 possible removals: 0,5 -1 -1,5 - 2 mm thickness.
It is possible to carry out vertical adjustments of the tool to use it even in the final sharpening phase.
N.B. In order to have the best result, the adjusted removal must be not higher than the applied edge.
It isn't indicated for the machining with "Formica" edge.

GLUE POT UNIT, EDGE LOADING AND PRESSING SYSTEM (STD)
complete with:
- hot melt glue with quick heat up system and internally teflon coated to allow an easy glue replacement
- glue application on the panel by means of glue spreading roller
- temperature adjustment of the applied glue integrated in the PLC control
- device for automatic recovery of unused glue
- automatic edge loading system for rolled edges with shear device for 3 mm max. thickness edges
- coil holder plate, 730 mm diameter
- pressing unit with n. 2 steel edge pressure rollers
- adjustable infeed fence with numeric readout
- automatic lowering of the glue pot temperature after a temporary non-use of the machine

Simple and intuitive
Error-free machining is ensured by the control panel positioned on the front of the machine, that allows an easy selection of all the main functions, among them, the operating units switching on and off. The PLC guides the operator during maintenance, cleaning, diagnostic operations, etc.

END CUTTING UNIT (STD)
With motor for 90 degrees end cutting of front and rear exceeding edge.
The blade alignment with reference to the cutting point is carried out using a new copying device which ensures a constant and precise cutting under any working condition.

SUPERPOSED TRIMMING UNIT (STD)
Equipped with vertical copying pads for an accurate positioning of tools with reference to the cutting point.
The unit is provided with 72 mm diameter, combined cutters: the radius part of the cutter is used to trim 2 mm radius edges and chamfered thin edges. The straight part of the cutter is used for the trimming of edges in wood up to 5 mm. Changing from radius edge to edge in wood is done easily moving the cutters axially. The edge thickness is shown by 2 numeric readouts.

EDGE SCRAPING UNIT (STD)
For the finishing of 3 mm PVC/ABS edges.
It assures an excellent vibration free finish thanks to its high rigidity structure.
High working precision thanks to the horizontal and vertical copying pads (with chrome plated surfaces), which assure an accurate positioning of the knives in relation to the cutting point.

BRUSHING UNIT (STD)
With two independent motors for the cleaning and polishing of the edge.
Tilted, vertically adjustable motors to optimize the cleaning/polishing action.

OPTIONAL DEVICES:
_________________

58.03.54 Automatic loading device for edges in strips
58.05.90 Device for heating the edge of the panel
58.03.55 Tools kit radius 3 mm instead of radius 2 mm
It replaces all 2 mm radius tools supplied as standard (trimmer and edge scraper) with 3 mm ones

Order before 3 pm and we'll aim to despatch stock items under 30kg the same day, on a next day service Monday to Friday.

Please allow 1 to 2 working days for delivery if you are in Highlands, Islands or Northern Ireland.

These parcels are sent are sent by APC Courier as standard.

For urgent orders, please phone us as we can offer recommend using one of our Premium delivery services or even same day couriers [at extra cost]

Sadly there is no one size that fits all so we offer a personal service tailored to your needs - We have lots of options and specialists so we can offer:

Next Day nationwide delivery with APC Couriers at low cost or we offer FREE Eco Delivery upto 30kg locally

Pallet service for some machines which is very economical but only suitable for certain items [and goods that are simple to tranship]

Dedicated vehicles with either curtain side [and tail lift unloading in some cases]

Specialist machinery movers with HIab crane off loading and position machines in your workshop or factory. Some of these options take a few days to organise and have availability.. If you are in a rush for a machine, give us a call during normal office hours so we can see what is possible for your chosen machine and location.

We also export our tools and machinery to over all of Europe and to 145 other countries worldwide! Depending on your needs we can offer:

TNT or DHL Courier – Fastest upto 30kg and Online orders.

International Airfreight – Fast for larger items and machines needed in a hurry

Containerisation for several machines, tools and spare parts if you need a complete workshop – Most economical

LCL Shipments for individual machines – Very Economical for one of heavy machines

Have you own Transport or Courier Company?

Use our click and Collect System and we can do the documentation for DHL, TNT, Fedex or others

£15,816.00
£18,979.20
Lead Time: 127 Days
Finance from £532.38 a month

Terms and Conditions apply. More Info

- +
  • Work table dimensions 2900 x 570 mm
  • Work table height 904 mm
  • Min - max. thickness of rolled edges 0,4 - 3 mm
  • Max. thickness of edges in strips Up to 5 mm
  • Min - max. panel height 12 - 50 mm
  • Min - max. panel height using edge scraping unit 16 - 50 mm
  • Min. panel length/width 190/110 mm
  • Min. panel length cut only on the front 120 mm
  • Feed speed 7 m/min
  • Feed motor power S1 0.55kw
  • Pneumatic operating pressure 6.5 bar
  • Exhaust outlet diameter (base) 120 mm
  • Exhaust outlet diameter (glue pot) 60 mm
  • Operating temperature 20 - 190c
  • Premilling unit
  • Motor power S1 2.2 kw
  • Blade rotation speed 9000 rpm
  • No. 1 diamond cutter D 80mm x H56mm x Z2
  • ------------------------------------------------------
  • SUPPLEMENTARY TOOLS:
  • ____________________
  • 58.05.28 Pair of cutters for trimmers R =3mm
  • 58.05.25 Pair of cutters for trimmers R =2mm
  • 58.05.27 Pair of cutters for edge scraping unit R =3mm
  • 58.05.26 Pair of cutters for edge scraping unit R =2mm
  • 58.05.42 Diamond cutters for pre-milling unit
  • ME28T RC version with scraping in lieu of brushing, is also available

Finance Calculation for your £ £ order

I would like to pay a deposit of

% = £
£

I would like to pay over months with the first payment deferred for months

Monthly payments of £
% APR (representative)
Finance Amount £
Interest Payable £
Total Amount Payable £

Total Amount Payable Includes Deposit Amount.

The figures shown are an illustration based on the cost of goods. Final details including shipping and discounts where applicable will be displayed on the checkout page.

Credit subject to status and affordability. Terms & Conditions Apply. Scott+Sargeant Woodworking Machinery Ltd trading as Scott+Sargeant Woodworking Machinery Ltd is a credit broker and is Authorised and Regulated by the Financial Conduct Authority. Credit is provided by Novuna Personal Finance, a trading style of Mitsubishi HC Capital UK PLC, authorised and regulated by the Financial Conduct Authority. Financial Services Register no. 704348. The register can be accessed through http://www.fca.org.uk.

IMPORTANT: Novuna rounds down the monthly payments, which may result in your total amount payable being less than the total cash price.

More Information
Part Number SAME28T
Manufacturer Minimax
Dia D= [mm] 0.00
Write Your Own Review
You're reviewing:Minimax ME28T Edgebander
Your Rating