Morso F Mitre Guillotine - Foot Operated
The MORSO-F cuts double mitre at 45 degrees and single mitre up to 90 degrees. Tenon, mortise joints, and a wide variety of angled cuts can also be made. The MORSO-F leaves the cut surface of the wood perfectly smooth and accurate, requiring no further preparation before joining. The horizontal movement of the knife block is adjustable in steps. The sliding longitudinal stop and measuring scale ensure accurate repeat work.
The F has a special lever system for wide profiles - the knife block has stepped horizontal adjustment allowing progressive cuts until the full width is achieved. Twin return springs automatically bring the knives back to start position. The MORSO-F makes no dust compared to a mitresaw, the waste of your moulding will be minimized as MORS?-F cuts double mitres very close. ( less than one mm waste of moulding). The mitre saw cannot do the mitres as close, and therefore the waste by using a saw, will always be minimum one cm. One cm of waste does not sound like much, but if a calculation is done of 100 cuts a day, it actually turns out that the waste over a year is 260 meters waste of moulding.
MORSO-F is supplied with perspex safety guard, waste chute, sliding longitudinal stop, measuring scale, adjustable fences (45-90 degrees), and adjustable rebate supports.
** Optional Digital Deadout now available for Length stop **