Drop in for a coffee and look round our showroom just south of London. If you need to contact us: send us an email >>

Dust Extractors & Waste

(192 Products)
Dust Extractors & Waste

Scott+Sargeant are experienced in solving dust and wood waste problems, small or large we can supply the correct technology and products for any specific requirements for dust extraction system installations.

We can supply systems for industrial workshops to educational Design & Technology classrooms. We can provide a comprehensive on-site evaluation to guarantee your peace of mind or supply ducting and dust extractors only.

View our dust extractors & waste machinery

Scott + Sargeant sells a wide range of Dust Extractors, workshop air filters and Waste machinery. From Bag dust extractors to high capacity fine dust units, shredding machines and briquette presses to compress waste.


Friendly advice & Service

View as Grid List

Items 1-48 of 192

Page
per page
Filter By
Set Descending Direction
  1. Fine Cartridge Filter for Dust Extractor D-500mm
    Fine Cartridge Filter for Dust Extractor D-500mm
    Rating:
    94%
    Fine Filter Dust Cartridge is suitable for many popular mobile extractors. Used in place of a cloth bag to give finer filtration and a larger surface area, the cartridge increases extraction efficiency and reduces the amount of dust re-entering the atmosphere. Can be used with all popular 500mm Diameter extractors - For operations that exclusively produce fine dust and may pose an explosion risk - sanding machines, work with mdf etc - customers should check the relevant COSHH requirements of their woodworking equipment as dust extraction equipment with totally enclosed filter systems and explosion relief may be required. Filtration to 1 micron Internal mounting size 500mm Diameter Filter area Packing size 56 x 56 x 68cm, 11.5kg
    Lead Time: 3 Days
    List £198.00
    £150.00
    Inc Vat £180.00
    As low as £126.00
  2. Fine Dust Units PJDMV2.5 - I
    Designed to extract waste from smaller fine dust emitting machinery, such as that produced from various sanders, linishers, grinders, polishers and band saws etc. Powerful - able to serve multiple point extraction simultaneously Low height of 760mm, makes unit ideal to fit under work benches Extremely compact size, recirculatory with high efficiency, low noise level and safety features make this unit particularly suitable for use in educational / training environments and small workshops where space is at a premium An integral face mounted viewable filter gauge ensures the user can see that your extraction unit is working effectively to protect you from the hazardous substances controlled, enabling you to maintain the filter in good condition and advising when it needs to be cleaned or replaced Premium quality super-glazed filters provide an extra smooth surface offering unsurpassed particle collection efficiency and improved long-term performance. Other filter media available for specialist applications Various inlet duct point options to side/s or rear make connection practical, Ideal for standing flush to a rear wall for optimising space if the side inlet locations are utilised For added convenience and flexibility in the smaller workshop there is an optional mobile kit available Can be supplied with a reinforced top for use as a support base for small machines that it serves or as a workspace, this optional extra should be requested at the time of ordering Option to be electrically interlocked to the equipment served (specify interlock starter / control panel when ordering) PERFORMANCE Designed to give a maximum airflow of 1580 m?/hr at the inlet, before allowing for the resistance of the ducting, please consult the fan curve to identify the predicted airflow at the resistance pressure loss for your system duct layout. NOISE LEVEL Typically 78 dB(A) measured at 2 metres for average acoustic conditions INLET Inlets diameters available: 63mm, 80mm, 100mm, 125mm & 150mm these can be installed on any combination of the four inlet points located 1 x left, 1 x right and 2 x rear, however simultaneous extraction can only be provided for the combinations A to G below. If additional inlets are required shut off valves must be present on each duct run to close off inlets that exceed the maximum simultaneous extraction capability. If inlet diameter and quantity is not specified on your order it will be supplied with 1 x 150 mm as standard A) 1 x 150mm (STANDARD) B) 1 x 125mm + 1 x 80mm or 63mm C) 2 x 100mm D) 1 x 100mm + 2 x 80mm E) 1 x 100mm + 3 x 63mm F) 3 x 80mm G) 4 x 63mm 240v Single Phase
    Lead Time: 24 Days
    £2,995.00
    £3,594.00
  3. Fine Dust Units PJDMV2.5-SM-I
    Designed to extract waste from smaller fine dust emitting machinery, such as that produced from various sanders, linishers, grinders, polishers and band saws etc. Powerful - able to serve multiple point extraction simultaneously Low height of 770mm, makes unit ideal to fit under work benches Extremely compact size, recirculatory with high efficiency, low noise level and safety features make this unit particularly suitable for use in educational / training environments and small workshops where space is at a premium An integral face mounted viewable filter gauge ensures the user can see that your extraction unit is working effectively to protect you from the hazardous substances controlled, enabling you to maintain the filter in good condition and advising when it needs to be cleaned or replaced Premium quality super-glazed filters provide an extra smooth surface offering unsurpassed particle collection efficiency and improved long-term performance. Other filter media available for specialist applications Option for a H13 or H14 grade HEPA filter add-on for enhanced air filtration performance Various inlet duct point options to sides or rear make connection practical, Ideal for standing flush to a rear wall for optimising space if the side inlet locations are utilised For added convenience and flexibility in the smaller workshop there is an optional mobile kit available Can be supplied with a reinforced top for use as a support base for small machines that it serves or as a workspace, this optional extra should be requested at the time of ordering Option to be electrically interlocked to the equipment served (specify interlock starter / control panel when ordering) PERFORMANCE Designed to give a maximum airflow of 1900 m?/hr at the inlet, before allowing for the resistance of the ducting, please consult the fan curve to identify the predicted airflow at the resistance pressure loss for your system duct layout. NOISE LEVEL Typically 79 dB(A) measured at 2 metres for average acoustic conditions INLET Inlets diameters available: 63mm, 80mm, 100mm, 125mm & 150mm these can be installed on any combination of the four inlet points located 1 x left, 1 x right and 2 x rear, however simultaneous extraction can only be provided for the combinations A to G below. If additional inlets are required shut off valves must be present on each duct run to close off inlets that exceed the maximum simultaneous extraction capability. If inlet diameter and quantity is not specified on your order it will be supplied with 1 x 150 mm as standard, A) 1 x 150mm (STANDARD) B) 1 x 125mm + 1 x 80mm or 63mm C) 2 x 100mm D) 1 x 100mm + 2 x 80mm E) 1 x 100mm + 3 x 63mm F) 3 x 80mm G) 4 x 63mm 240V single Phase
    Lead Time: 24 Days
    £2,995.00
    £3,594.00
  4. Fine Dust Units PJDMV2.5-SM-I
    Designed to extract waste from smaller fine dust emitting machinery, such as that produced from various sanders, linishers, grinders, polishers and band saws etc. Powerful - able to serve multiple point extraction simultaneously Low height of 760mm, makes unit ideal to fit under work benches Extremely compact size, recirculatory with high efficiency, low noise level and safety features make this unit particularly suitable for use in educational / training environments and small workshops where space is at a premium An integral face mounted viewable filter gauge ensures the user can see that your extraction unit is working effectively to protect you from the hazardous substances controlled, enabling you to maintain the filter in good condition and advising when it needs to be cleaned or replaced Premium quality super-glazed filters provide an extra smooth surface offering unsurpassed particle collection efficiency and improved long-term performance. Other filter media available for specialist applications Various inlet duct point options to side/s or rear make connection practical, Ideal for standing flush to a rear wall for optimising space if the side inlet locations are utilised For added convenience and flexibility in the smaller workshop there is an optional mobile kit available Can be supplied with a reinforced top for use as a support base for small machines that it serves or as a workspace, this optional extra should be requested at the time of ordering Option to be electrically interlocked to the equipment served (specify interlock starter / control panel when ordering) PERFORMANCE Designed to give a maximum airflow of 1800 m?/hr at the inlet, before allowing for the resistance of the ducting, please consult the fan curve to identify the predicted airflow at the resistance pressure loss for your system duct layout. NOISE LEVEL Typically 77.5 dB(A) measured at 2 metres for average acoustic conditions INLET Inlets diameters available: 63mm, 80mm, 100mm, 125mm & 150mm these can be installed on any combination of the four inlet points located 1 x left, 1 x right and 2 x rear, however simultaneous extraction can only be provided for the combinations A to G below. If additional inlets are required shut off valves must be present on each duct run to close off inlets that exceed the maximum simultaneous extraction capability. If inlet diameter and quantity is not specified on your order it will be supplied with 1 x 150 mm as standard, A) 1 x 150mm (STANDARD) B) 1 x 125mm + 1 x 80mm or 63mm C) 2 x 100mm D) 1 x 100mm + 2 x 80mm E) 1 x 100mm + 3 x 63mm F) 3 x 80mm G) 4 x 63mm Inlet Location Options 1x Left (STANDARD)2x Rear 1x Right 240v Single Phase
    Lead Time: 24 Days
    £2,995.00
    £3,594.00
  5. Fine Dust Units PJDMV2.5-SM-I HEPA
    Designed to extract waste from smaller fine dust emitting machinery, such as that produced from various sanders, linishers, grinders, polishers and band saws etc. Powerful - able to serve multiple point extraction simultaneously Low height of 770mm, makes unit ideal to fit under work benches Extremely compact size, recirculatory with high efficiency, low noise level and safety features make this unit particularly suitable for use in educational / training environments and small workshops where space is at a premium An integral face mounted viewable filter gauge ensures the user can see that your extraction unit is working effectively to protect you from the hazardous substances controlled, enabling you to maintain the filter in good condition and advising when it needs to be cleaned or replaced Premium quality super-glazed filters provide an extra smooth surface offering unsurpassed particle collection efficiency and improved long-term performance. Other filter media available for specialist applications Including a H13 grade HEPA filter add-on for enhanced air filtration performance, Option for H14 HEPA Filter at point of order Various inlet duct point options to sides or rear make connection practical, Ideal for standing flush to a rear wall for optimising space if the side inlet locations are utilised For added convenience and flexibility in the smaller workshop there is an optional mobile kit available Can be supplied with a reinforced top for use as a support base for small machines that it serves or as a workspace, this optional extra should be requested at the time of ordering Option to be electrically interlocked to the equipment served (specify interlock starter / control panel when ordering) PERFORMANCE Designed to give a maximum airflow of 1900 m?/hr at the inlet, before allowing for the resistance of the ducting, please consult the fan curve to identify the predicted airflow at the resistance pressure loss for your system duct layout. NOISE LEVEL Typically 79 dB(A) measured at 2 metres for average acoustic conditions INLET Inlets diameters available: 63mm, 80mm, 100mm, 125mm & 150mm these can be installed on any combination of the four inlet points located 1 x left, 1 x right and 2 x rear, however simultaneous extraction can only be provided for the combinations A to G below. If additional inlets are required shut off valves must be present on each duct run to close off inlets that exceed the maximum simultaneous extraction capability. If inlet diameter and quantity is not specified on your order it will be supplied with 1 x 150 mm as standard, A) 1 x 150mm (STANDARD) B) 1 x 125mm + 1 x 80mm or 63mm C) 2 x 100mm D) 1 x 100mm + 2 x 80mm E) 1 x 100mm + 3 x 63mm F) 3 x 80mm G) 4 x 63mm 240v Single Phase
    Lead Time: 24 Days
    £4,295.00
    £5,154.00
  6. Fine Dust Units PJDMV2.5-TM-I
    Designed to extract waste from smaller fine dust emitting machinery, such as that produced from various sanders, linishers, grinders, polishers and band saws etc. Powerful - able to serve multiple point extraction simultaneously Extremely compact size, recirculatory with high efficiency, low noise level and safety features make this unit particularly suitable for use in educational / training environments and small workshops where space is at a premium An integral face mounted viewable filter gauge ensures the user can see that your extraction unit is working effectively to protect you from the hazardous substances controlled, enabling you to maintain the filter in good condition and advising when it needs to be cleaned or replaced Premium quality super-glazed filters provide an extra smooth surface offering unsurpassed particle collection efficiency and improved long-term performance. Other filter media available for specialist applications Various inlet duct point options to side/s or rear make connection practical. Ideal for standing flush to a rear wall for optimising space if the side inlet locations are utilised Can be supplied with a reinforced top for use as a support base for small machines that it serves or as a workspace, this optional extra should be requested at the time of ordering Option to be electrically interlocked to the equipment served (specify interlock starter when ordering) PERFORMANCE Designed to give a maximum airflow of 1780 m?/hr at the inlet, before allowing for the resistance of the ducting, please consult the fan curve to identify the predicted airflow at the resistance pressure loss for your system duct layout. NOISE LEVEL Typically 73.94 dB(A) measured at 2 metres for average acoustic conditions INLET Inlet Location Options 1x Left (STANDARD)2x Rear 1x Right. Inlets diameters available: 63mm, 80mm, 100mm, 125mm & 150mm these can be installed on any combination of the four inlet points located 1 x left, 1 x right and 2 x rear, however simultaneous extraction can only be provided for the combinations A to G below. If additional inlets are required shut off valves must be present on each duct run to close off inlets that exceed the maximum simultaneous extraction capability. If inlet diameter and quantity is not specified on your order it will be supplied with 1 x 150 mm as standard. A) 1 x 150mm (STANDARD) B) 1 x 125mm + 1 x 80mm or 63mm C) 2 x 100mm D) 1 x 100mm + 2 x 80mm E) 1 x 100mm + 3 x 63mm F) 3 x 80mm G) 4 x 63mm 240v Single Phase
    Lead Time: 24 Days
    £2,995.00
    £3,594.00
  7. Fine Dust Units PJDMV2.5-WT-I
    For use with Circular/Table Saws in smaller preparation rooms by utilising floor space normally used by an existing run-off table to the front of the Saw Powerful extraction suitable for most modern saws Extremely compact size, recirculatory with high efficiency, low noise level and safety features make this unit particularly suitable for use in educational / training environments and small workshops where space is at a premium An integral face mounted viewable filter gauge ensures the user can see that your extraction unit is working effectively to protect you from the hazardous substances controlled, enabling you to maintain the filter in good condition and advising when it needs to be cleaned or replaced Premium quality super-glazed filters provide an extra smooth surface offering unsurpassed particle collection efficiency and improved long-term performance. Other filter media available for specialist applications Option to be electrically interlocked to the equipment served (specify interlock starter / control panel when ordering) PERFORMANCE Designed to give a maximum airflow of 1722 m?/hr at the inlet, before allowing for the resistance of the ducting, please consult the fan curve to identify the predicted airflow at the resistance pressure loss for your system duct layout. NOISE LEVEL Typically 78 dB(A) measured at 2 metres for average acoustic conditions INLET Inlets diameters available: 63mm, 80mm, 100mm, 125mm & 150mm these can be installed on any combination of the four inlet points located 1 x left, 1 x right and 2 x rear, however simultaneous extraction can only be provided for the combinations A to G below. If additional inlets are required shut off valves must be present on each duct run to close off inlets that exceed the maximum simultaneous extraction capability. If inlet diameter and quantity is not specified on your order it will be supplied with 1 x 150 mm as standard, A) 1 x 150mm (STANDARD) B) 1 x 125mm + 1 x 80mm or 63mm C) 2 x 100mm D) 1 x 100mm + 2 x 80mm E) 1 x 100mm + 3 x 63mm F) 3 x 80mm G) 4 x 63mm 240v Single Phase
    Lead Time: 24 Days
    £3,495.00
    £4,194.00
  8. iTECH ABS 3000 Fine Filter Dust Extractor 1ph 230v
    iTECH ABS 3000 Fine Filter Dust Extractor 1ph 230v
    Rating:
    100%
    The new high quality mobile extractor in the iTECH range complete with fine filter cartridge - The new high quality mobile extractor in the iTECH range- This is a more rugged extractor designed for small workshops. The industrial construction and quality finish sets it apart from others. It is big enough to handle a 310mm planer or many other workshop machines. The cyclonic filtration system works by separating the waste from the airflow, diverting the waste into the plastic collecting bag whilst the filtered air passes through the bag. Technical Specifications: Motor power 2hp Voltage 240v (16a) Fan diameter 300mm Suction capacity 3000m3/h Inlet size 3 x 100mm Total assembled Dimensions 985 x 560 x H1750mm Sound pressure level in dB(A) <85 Packaging detail 110 x 65 x 122cm Weight 64kg Includes 1 x ITWMDCCFF Spare collection bags ITWMABS3_5BAG
    Lead Time: 19 Days
    List £780.00
    £599.00
    Inc Vat £718.80
View as Grid List

Items 1-48 of 192

Page
per page
Filter By
Set Descending Direction