Fine Dust Extractors
(51 Products)
Buy a fine dust extrator today
Choose from our huge range of the best fine dust extractors for your woodworking workshop. Whether it's for individual machines, or groups of them, our extractor fan solutions will manage your waste in an efficient and effective way. Browse our range below from manufacturers like Nestro, P&J, iTECH and Aries.
How Much Dust Extraction Do I Need?
Traditional machines usually give the airflow at 25 m/s
Machines that produce large volumes of shavings such as a 4 side planer or thicknesser are normally needing an air speed of 28 m/s
CNC Routers, Panel saws, and Edgebanders normally are calculated at 30 m/s or more
Eg: When a spindle moulder with 2 x 120 mm outlets, a suction volume of approx. 2024 m3 / hr is required to get optimum extraction. It is therefore recommended that the extraction complies with this.
|
Dust extraction can be very confusing, and different manufacturers give different volumes required at different speeds. This is a guide for diameters and the corresponding capacity required for your dust extractor which should help you compare 'apples with apples' and make the right decision. If for example the CNC machine you are buying is equipped with a 250mm diameter dust extraction connection, you can use the tables below to find out which extractor is suitable for your application [5299 cmh] but if possible you should always ask the manufacturer for the actual machine requirement first. |
-
Designed to extract waste from smaller fine dust emitting machinery, such as that produced from various sanders, linishers, grinders, polishers and band saws etc. Powerful - able to serve multiple point extraction simultaneously Low height of 760mm, makes unit ideal to fit under work benches Extremely compact size, recirculatory with high efficiency, low noise level and safety features make this unit particularly suitable for use in educational / training environments and small workshops where space is at a premium An integral face mounted viewable filter gauge ensures the user can see that your extraction unit is working effectively to protect you from the hazardous substances controlled, enabling you to maintain the filter in good condition and advising when it needs to be cleaned or replaced Premium quality super-glazed filters provide an extra smooth surface offering unsurpassed particle collection efficiency and improved long-term performance. Other filter media available for specialist applications Various inlet duct point options to side/s or rear make connection practical, Ideal for standing flush to a rear wall for optimising space if the side inlet locations are utilised For added convenience and flexibility in the smaller workshop there is an optional mobile kit available Can be supplied with a reinforced top for use as a support base for small machines that it serves or as a workspace, this optional extra should be requested at the time of ordering Option to be electrically interlocked to the equipment served (specify interlock starter / control panel when ordering) PERFORMANCE Designed to give a maximum airflow of 1580 m?/hr at the inlet, before allowing for the resistance of the ducting, please consult the fan curve to identify the predicted airflow at the resistance pressure loss for your system duct layout. NOISE LEVEL Typically 78 dB(A) measured at 2 metres for average acoustic conditions INLET Inlets diameters available: 63mm, 80mm, 100mm, 125mm & 150mm these can be installed on any combination of the four inlet points located 1 x left, 1 x right and 2 x rear, however simultaneous extraction can only be provided for the combinations A to G below. If additional inlets are required shut off valves must be present on each duct run to close off inlets that exceed the maximum simultaneous extraction capability. If inlet diameter and quantity is not specified on your order it will be supplied with 1 x 150 mm as standard A) 1 x 150mm (STANDARD) B) 1 x 125mm + 1 x 80mm or 63mm C) 2 x 100mm D) 1 x 100mm + 2 x 80mm E) 1 x 100mm + 3 x 63mm F) 3 x 80mm G) 4 x 63mm 240v Single PhaseLead Time: 24 Days£2,995.00£3,594.00
-
Designed to extract waste from smaller fine dust emitting machinery, such as that produced from various sanders, linishers, grinders, polishers and band saws etc. Powerful - able to serve multiple point extraction simultaneously Low height of 770mm, makes unit ideal to fit under work benches Extremely compact size, recirculatory with high efficiency, low noise level and safety features make this unit particularly suitable for use in educational / training environments and small workshops where space is at a premium An integral face mounted viewable filter gauge ensures the user can see that your extraction unit is working effectively to protect you from the hazardous substances controlled, enabling you to maintain the filter in good condition and advising when it needs to be cleaned or replaced Premium quality super-glazed filters provide an extra smooth surface offering unsurpassed particle collection efficiency and improved long-term performance. Other filter media available for specialist applications Option for a H13 or H14 grade HEPA filter add-on for enhanced air filtration performance Various inlet duct point options to sides or rear make connection practical, Ideal for standing flush to a rear wall for optimising space if the side inlet locations are utilised For added convenience and flexibility in the smaller workshop there is an optional mobile kit available Can be supplied with a reinforced top for use as a support base for small machines that it serves or as a workspace, this optional extra should be requested at the time of ordering Option to be electrically interlocked to the equipment served (specify interlock starter / control panel when ordering) PERFORMANCE Designed to give a maximum airflow of 1900 m?/hr at the inlet, before allowing for the resistance of the ducting, please consult the fan curve to identify the predicted airflow at the resistance pressure loss for your system duct layout. NOISE LEVEL Typically 79 dB(A) measured at 2 metres for average acoustic conditions INLET Inlets diameters available: 63mm, 80mm, 100mm, 125mm & 150mm these can be installed on any combination of the four inlet points located 1 x left, 1 x right and 2 x rear, however simultaneous extraction can only be provided for the combinations A to G below. If additional inlets are required shut off valves must be present on each duct run to close off inlets that exceed the maximum simultaneous extraction capability. If inlet diameter and quantity is not specified on your order it will be supplied with 1 x 150 mm as standard, A) 1 x 150mm (STANDARD) B) 1 x 125mm + 1 x 80mm or 63mm C) 2 x 100mm D) 1 x 100mm + 2 x 80mm E) 1 x 100mm + 3 x 63mm F) 3 x 80mm G) 4 x 63mm 240V single PhaseLead Time: 24 Days£2,995.00£3,594.00
-
Designed to extract waste from smaller fine dust emitting machinery, such as that produced from various sanders, linishers, grinders, polishers and band saws etc. Powerful - able to serve multiple point extraction simultaneously Low height of 760mm, makes unit ideal to fit under work benches Extremely compact size, recirculatory with high efficiency, low noise level and safety features make this unit particularly suitable for use in educational / training environments and small workshops where space is at a premium An integral face mounted viewable filter gauge ensures the user can see that your extraction unit is working effectively to protect you from the hazardous substances controlled, enabling you to maintain the filter in good condition and advising when it needs to be cleaned or replaced Premium quality super-glazed filters provide an extra smooth surface offering unsurpassed particle collection efficiency and improved long-term performance. Other filter media available for specialist applications Various inlet duct point options to side/s or rear make connection practical, Ideal for standing flush to a rear wall for optimising space if the side inlet locations are utilised For added convenience and flexibility in the smaller workshop there is an optional mobile kit available Can be supplied with a reinforced top for use as a support base for small machines that it serves or as a workspace, this optional extra should be requested at the time of ordering Option to be electrically interlocked to the equipment served (specify interlock starter / control panel when ordering) PERFORMANCE Designed to give a maximum airflow of 1800 m?/hr at the inlet, before allowing for the resistance of the ducting, please consult the fan curve to identify the predicted airflow at the resistance pressure loss for your system duct layout. NOISE LEVEL Typically 77.5 dB(A) measured at 2 metres for average acoustic conditions INLET Inlets diameters available: 63mm, 80mm, 100mm, 125mm & 150mm these can be installed on any combination of the four inlet points located 1 x left, 1 x right and 2 x rear, however simultaneous extraction can only be provided for the combinations A to G below. If additional inlets are required shut off valves must be present on each duct run to close off inlets that exceed the maximum simultaneous extraction capability. If inlet diameter and quantity is not specified on your order it will be supplied with 1 x 150 mm as standard, A) 1 x 150mm (STANDARD) B) 1 x 125mm + 1 x 80mm or 63mm C) 2 x 100mm D) 1 x 100mm + 2 x 80mm E) 1 x 100mm + 3 x 63mm F) 3 x 80mm G) 4 x 63mm Inlet Location Options 1x Left (STANDARD)2x Rear 1x Right 240v Single PhaseLead Time: 24 Days£2,995.00£3,594.00
-
Designed to extract waste from smaller fine dust emitting machinery, such as that produced from various sanders, linishers, grinders, polishers and band saws etc. Powerful - able to serve multiple point extraction simultaneously Low height of 770mm, makes unit ideal to fit under work benches Extremely compact size, recirculatory with high efficiency, low noise level and safety features make this unit particularly suitable for use in educational / training environments and small workshops where space is at a premium An integral face mounted viewable filter gauge ensures the user can see that your extraction unit is working effectively to protect you from the hazardous substances controlled, enabling you to maintain the filter in good condition and advising when it needs to be cleaned or replaced Premium quality super-glazed filters provide an extra smooth surface offering unsurpassed particle collection efficiency and improved long-term performance. Other filter media available for specialist applications Including a H13 grade HEPA filter add-on for enhanced air filtration performance, Option for H14 HEPA Filter at point of order Various inlet duct point options to sides or rear make connection practical, Ideal for standing flush to a rear wall for optimising space if the side inlet locations are utilised For added convenience and flexibility in the smaller workshop there is an optional mobile kit available Can be supplied with a reinforced top for use as a support base for small machines that it serves or as a workspace, this optional extra should be requested at the time of ordering Option to be electrically interlocked to the equipment served (specify interlock starter / control panel when ordering) PERFORMANCE Designed to give a maximum airflow of 1900 m?/hr at the inlet, before allowing for the resistance of the ducting, please consult the fan curve to identify the predicted airflow at the resistance pressure loss for your system duct layout. NOISE LEVEL Typically 79 dB(A) measured at 2 metres for average acoustic conditions INLET Inlets diameters available: 63mm, 80mm, 100mm, 125mm & 150mm these can be installed on any combination of the four inlet points located 1 x left, 1 x right and 2 x rear, however simultaneous extraction can only be provided for the combinations A to G below. If additional inlets are required shut off valves must be present on each duct run to close off inlets that exceed the maximum simultaneous extraction capability. If inlet diameter and quantity is not specified on your order it will be supplied with 1 x 150 mm as standard, A) 1 x 150mm (STANDARD) B) 1 x 125mm + 1 x 80mm or 63mm C) 2 x 100mm D) 1 x 100mm + 2 x 80mm E) 1 x 100mm + 3 x 63mm F) 3 x 80mm G) 4 x 63mm 240v Single PhaseLead Time: 24 Days£4,295.00£5,154.00
-
Designed to extract waste from smaller fine dust emitting machinery, such as that produced from various sanders, linishers, grinders, polishers and band saws etc. Powerful - able to serve multiple point extraction simultaneously Extremely compact size, recirculatory with high efficiency, low noise level and safety features make this unit particularly suitable for use in educational / training environments and small workshops where space is at a premium An integral face mounted viewable filter gauge ensures the user can see that your extraction unit is working effectively to protect you from the hazardous substances controlled, enabling you to maintain the filter in good condition and advising when it needs to be cleaned or replaced Premium quality super-glazed filters provide an extra smooth surface offering unsurpassed particle collection efficiency and improved long-term performance. Other filter media available for specialist applications Various inlet duct point options to side/s or rear make connection practical. Ideal for standing flush to a rear wall for optimising space if the side inlet locations are utilised Can be supplied with a reinforced top for use as a support base for small machines that it serves or as a workspace, this optional extra should be requested at the time of ordering Option to be electrically interlocked to the equipment served (specify interlock starter when ordering) PERFORMANCE Designed to give a maximum airflow of 1780 m?/hr at the inlet, before allowing for the resistance of the ducting, please consult the fan curve to identify the predicted airflow at the resistance pressure loss for your system duct layout. NOISE LEVEL Typically 73.94 dB(A) measured at 2 metres for average acoustic conditions INLET Inlet Location Options 1x Left (STANDARD)2x Rear 1x Right. Inlets diameters available: 63mm, 80mm, 100mm, 125mm & 150mm these can be installed on any combination of the four inlet points located 1 x left, 1 x right and 2 x rear, however simultaneous extraction can only be provided for the combinations A to G below. If additional inlets are required shut off valves must be present on each duct run to close off inlets that exceed the maximum simultaneous extraction capability. If inlet diameter and quantity is not specified on your order it will be supplied with 1 x 150 mm as standard. A) 1 x 150mm (STANDARD) B) 1 x 125mm + 1 x 80mm or 63mm C) 2 x 100mm D) 1 x 100mm + 2 x 80mm E) 1 x 100mm + 3 x 63mm F) 3 x 80mm G) 4 x 63mm 240v Single PhaseLead Time: 24 Days£2,995.00£3,594.00
-
For use with Circular/Table Saws in smaller preparation rooms by utilising floor space normally used by an existing run-off table to the front of the Saw Powerful extraction suitable for most modern saws Extremely compact size, recirculatory with high efficiency, low noise level and safety features make this unit particularly suitable for use in educational / training environments and small workshops where space is at a premium An integral face mounted viewable filter gauge ensures the user can see that your extraction unit is working effectively to protect you from the hazardous substances controlled, enabling you to maintain the filter in good condition and advising when it needs to be cleaned or replaced Premium quality super-glazed filters provide an extra smooth surface offering unsurpassed particle collection efficiency and improved long-term performance. Other filter media available for specialist applications Option to be electrically interlocked to the equipment served (specify interlock starter / control panel when ordering) PERFORMANCE Designed to give a maximum airflow of 1722 m?/hr at the inlet, before allowing for the resistance of the ducting, please consult the fan curve to identify the predicted airflow at the resistance pressure loss for your system duct layout. NOISE LEVEL Typically 78 dB(A) measured at 2 metres for average acoustic conditions INLET Inlets diameters available: 63mm, 80mm, 100mm, 125mm & 150mm these can be installed on any combination of the four inlet points located 1 x left, 1 x right and 2 x rear, however simultaneous extraction can only be provided for the combinations A to G below. If additional inlets are required shut off valves must be present on each duct run to close off inlets that exceed the maximum simultaneous extraction capability. If inlet diameter and quantity is not specified on your order it will be supplied with 1 x 150 mm as standard, A) 1 x 150mm (STANDARD) B) 1 x 125mm + 1 x 80mm or 63mm C) 2 x 100mm D) 1 x 100mm + 2 x 80mm E) 1 x 100mm + 3 x 63mm F) 3 x 80mm G) 4 x 63mm 240v Single PhaseLead Time: 24 Days£3,495.00£4,194.00
-
The new high quality mobile extractor in the iTECH range complete with fine filter cartridge - The new high quality mobile extractor in the iTECH range- This is a more rugged extractor designed for small workshops. The industrial construction and quality finish sets it apart from others. It is big enough to handle a 310mm planer or many other workshop machines. The cyclonic filtration system works by separating the waste from the airflow, diverting the waste into the plastic collecting bag whilst the filtered air passes through the bag. Technical Specifications: Motor power 2hp Voltage 240v (16a) Fan diameter 300mm Suction capacity 3000m3/h Inlet size 3 x 100mm Total assembled Dimensions 985 x 560 x H1750mm Sound pressure level in dB(A) <85 Packaging detail 110 x 65 x 122cm Weight 64kg Includes 1 x ITWMDCCFF Spare collection bags ITWMABS3_5BAGLead Time: 19 DaysList £780.00£599.00Inc Vat £718.80
-
SPECIAL OFFER : iTECH DC002S with Fine Dust Cartridge Filters + 25 Plastic Dust Bags included. iTECH DC002 2 Bag Dust Extractor is a rugged extractor designed for small workshops. The industrial construction and quality finish sets it apart from others. The cyclone filtration system works by separating the waste from the airflow, diverting the waste into the collecting bag. The base is fitted with castors for mobility around the workshop. The 150 mm inlet is fitted with a triple branch 100mm adaptor, allowing connection to either one or two machines. Supplied complete with 1x 3m 100mm diameter. hose. Air filter canister for the iTech DC001 and DC002 dust extractors. Upgrade your iTech dust extractor to filter out fine dust caused by: Sanding, Sawing, Routing etc... Filtration to 1 micron. Internal mounting size 500mm Diameter, Easily slips on with air tight film seal. [Motor power] [3hp] [Fan diameter] [300mm] [Inlet diameter] [150] [Inlet holes] [3 x 100mm] [Air capacity] [1490cfm] [Bag diameter] [500mm] [Packing size] [1220 x 580 x 580cm] [Noise level] 89dB Filter : Filtration to 1 micron Internal mounting size 500mm Diameter Filter area Packing size 56 x 56 x 68cm, 11.5kg INCLUDED : ITWMDC002_3 ITWMDCCFF PJBAG42Lead Time: 3 DaysList £872.40£655.00Inc Vat £786.00
-
Designed for the extraction of fine dust particles. Typical applications include processes such as sanding, grinding, fettling, routing, polishing, powder handling, sawing, shot-blasting or in areas of dispensing, packaging, mixing, sieving and weighing - varied dry dust applications for all areas of industrial processing - Powerful - able to serve multiple point extraction simultaneously - Unit benefits from automated filter cleaning on shut off which ensures and prolongs filter life aiding effective filtration with no manual intervention depositing waste to bin/s and renewing performance on restart - Compact footprint with the advantage of a sealed steel waste bin/s, (lined with removable waste collection bag/s) making it ideal for locations requiring restricted access to the waste for security or health reasons. Suitable for smaller centralised multi systems - Additional safety feature of an ATEX rated flameless explosion vent panel for KST1 & KST2 combustible dusts with fan motor being ATEX rated for DSEAR zone 22 use - An integral face mounted viewable filter gauge ensures the user can see that your extraction unit is working effectively to protect you from the hazardous substances controlled, enabling you to maintain the filter in good condition and advising when it needs to be cleaned or replaced. Filters are high quality anti-static media to minimise risk of static spark ignition and a super-glaze coating to provide an extra smooth surface offering unsurpassed particle collection efficiency with superior dust release and good air permeability for improved long-term performance. Other filter media available for specialist applications - The side mounted shaker and duct connection inlet are universal for left- or right-hand side mounting, these can be switched on site Can be electrically interlocked to the equipment served (specify interlock starter when ordering). PERFORMANCE Designed to give a maximum airflow of 6150 m?/hr at the inlet, before allowing for the resistance of the ducting, please consult the fan curve to identify the predicted airflow at the resistance pressure loss for your system duct layout. NOISE LEVEL Typically 75.83 dB(A) measured at 2 metres for average acoustic conditions INLET 454mm x 206mm. As standard supplied with a 300mm¥ transition piece, other inlet sizes available on request. Unit can be assembled with inlet on the right (standard), left or rear of the unit, this is adjustable on site. ELECTRICAL DATA The following are typical values and may vary slightly from those displayed on the motor plate. Where different use the motor values in place of those listed. The breaker size given is an estimate, the electrician should calculate the correct size for your installation based on the FLC, SLC, cable size and length. Continuously rated totally enclosed fan cooled (TEFC) electric motor fitted with sealed for life bearings 7.5 kW 400 volts efficiency rating IE3. ATEX rated for zone 22. Full load current 13.8 amps. Starting Amps DOL 131.195 amps for 10 seconds, typical overload setting 13.8 amps. MOTOR CONTROL GEAR DOL Fan Starter with Auto Shake Cleaning Timer - IP55 Enclosure - Supplied loose for remote mounting in non-hazardous area. Supply voltage required - 400 volts. AC 3 & earth via - MCB3 P - 35A-Curve C (C 35/3) A starter suitable for interlocking is available as an option which must be specified on the order; in which case the supply may require a neutral connection to the starter panel and a 400 volt control circuit. Please contact us to discuss if this is required. SHAKER MOTOR 1 x 0.12 kW - 400 volts full load current 0.58 amps. Starting amps DOL 1.566 amps for 5 seconds. As standard the shaker motor housing is manufactured on the left hand side of the body, but can be moved to the right hand side on site. FAN TYPE Centrifugal, Backward Inclined, Direct Drive. FILTERS 1 filter giving a total filtration area of 33.75 m² Filter media for specialist applications available on request, the standard filter media on this unit is polyester needlefelt superglaze finish. Which has excellent tensile strength and abrasion resistance, fair acid and alkali resistance. Superglaze finish provides an extra smooth surface offering superior dust release whilst maintaining good air permeability equivalent to a singe finish, for fine dust applications and improved particle collection efficiency.Temperatures up to 150 degreesC, maximum surge 170 degreesC. Typical Applications for this filter media: Aluminium, Asbestos, Cement, Ceramics, Flour, Foundries, Grain, Lead, Mining, Plaster, Pharmaceuticals, Steel and Wood. FILTER PRESSURE INDICATOR Enabling you to comply with HSE best practice recommendations the factory fitted differential pressure gauge continually monitors the filter performance and alerts when filter efficiency is compromised, identifying filter defects such as blockage or damage and indicating when filter requires replacement. FILTER CLEANING Auto Shake filter cleaning mechanism fitted. Operates at fan shut down; controlled by the combined controller/starter thus ensuring optimum filter cleaning whilst eliminating manual intervention and prolonging filter life. The maximum recommended interval between cleaning cycles is 4 hours of continuous operation. CONSTRUCTION Unit constructed from high quality, cold rolled, low carbon steel manufactured to BS EN 10130:2006 and finished in grey, tarnish resistant, durable hammer paint. WASTE COLLECTION 1 x Sealed bin(s) made from high quality, cold rolled, low carbon steel plate manufactured to BS EN 10130:2006, fitted with pressure equalising balancer and lined with extraction bag(s) [heavy duty polythene] approximate total waste collection volume of 170 litres. Maximum practical usable capacity will vary according to waste type (density/weight). LOCATION Designed for internal use only. RECIRCULATION (WARM AIR RETURN) The filtered air is recirculated from the extraction unit back into the unit location WEIGHT 533Kg (excluding weight of waste) HAZARDOUS SUBSTANCES TO BE CONTROLLED Please refer to your quotation which details the hazardous substance and particle size, or ask P&J to confirm that this unit & filter media specification is appropriate for your process and substances EXPLOSION RELIEF Explosion relief - ATEX Certified Panel for Dust Explosion Class KST1 & KST2 giving an area of explosion relief of 0.359 m²Lead Time: 24 Days£11,450.00£13,740.00
-
P&J PJB250 enclosed unit 5.5HP Designed for the extraction of fine dust particles. Typical applications include processes such as sanding, grinding, fettling, routing, polishing, powder handling, sawing, shot-blasting or in areas of dispensing, packaging, mixing, sieving and weighing - varied dry dust applications for all areas of industrial processing. Unit benefits from automated filter cleaning on shut off which ensures and prolongs filter life aiding effective filtration with no manual intervention depositing waste to bin/s and renewing performance on restart Compact footprint with the advantage of a sealed steel waste bin/s, (lined with removable waste collection bag/s) making it ideal for locations requiring restricted access to the waste for security or health reasons. Suitable for smaller centralised multi systems Additional safety feature of an ATEX rated explosion vent panel for KST1 & KST2 combustible dusts with fan motor being ATEX rated for DSEAR zone 22 use An integral face mounted viewable filter gauge ensures the user can see that your extraction unit is working effectively to protect you from the hazardous substances controlled, enabling you to maintain the filter in good condition and advising when it needs to be cleaned or replaced Filters are high quality anti-static media to minimise risk of static spark ignition and a super-glaze coating to provide an extra smooth surface offering unsurpassed particle collection efficiency with superior dust release and good air permeability for improved long-term performance. Other filter media available for specialist applications The side mounted shaker and duct connection inlet are universal for left- or right-hand side mounting, these can be switched on site. Minimum clearance of 300mm required above unit. Number of collection bags 1 Motor power 5.5HP Voltage 415V Inlet diameter 345mm x 181mm (250mm inlet piece supplied) Shaker motor 1 x 0.12 kw Air flow Up to 3650m/hr Overall dimensions 1400 x 1005 x 2700mm Weight 371kgsLead Time: 24 Days£ Enquire
-
This applicator is supplied complete with gun and trolley. It delivers a controlled measured amount of adhesive - wide range of special nozzles and fittings available.. The benefit of this is to exclude surplus glue or not enough glue on joints and is especially suitable for glueing of dowel holes and joinery joints (mortises tenons etc) 0565 is supplied with one straight gripped gun - It consists of a tank and cover in stainless steel with four closing hooks according to CE regulations, of a 4 meters long hose and of a gun with anatomic grip, of a trolley with a shelf under which a timer is fixed. The tank capacity is 12kg regulator for glue output included on gun. It can be equipped with a wide range of nozzles for measured dosage of glue. Unlike the traditional glue feeders this equipment has a double adjustment: - glue flow, acting on the ring positioned on the back of the gun - extrusion time through a timer. Unscrewing the knob the extrusion time decreases, screwing the knob the extrusion time increases (picture 1 and 2). For this reason the equipment must always be connected to the air net (min. 6/max. 8 bar). Useful information: Fields of application: it is ideal for small and medium series, for both panel and solid timber processing, where it is necessary to keep a constant amount of glue delivery and where micro regulations are requested. Dowels, chair slots, tenons (open slots) and slots for door/window frames and shutters. Glue features: use PVA glues only, viscosity between 6000 and 12000 mPa s, working temperature 20 degrees C/65 degrees F. Cleaning: after daily use remove possible glue residues by washing the nozzle with cold water using the provided 0044 tap fitting and leaving it completely immersed in the water of the container on the side of the feeder. This operation is necessary to avoid the obstruction of the nozzle holes caused by the drying of the glue. Advantages: fast and practical gluing reducing the time of the working process, remarkable glue-saving and quality improvement as well as a better bond of the glued part. Accessories and nozzles: please refer to the accessories and nozzles of the A8 range (all the available nozzles are interchangeable). On request, with dimensions and wood samples, custom made nozzles can be produced to any specificationLead Time: 22 DaysList £3,176.40£2,545.00Inc Vat £3,054.00