Veneer Jointing Machines
(5 Products)
We have a wide range of zig-zag and butt jointing machines for joining your veneers. The new edge glueing butt jointing systems have been perfected to give fast, perfect veneer joints on thin or thick veneers.
-
Casati Linea 1000 is a special veneer joining machine with integrated edge gluing. This machine permits the longitudinal splicing of veneer sheets, LINEA 1000 feeds and splicing of the veneer: the glue is applied and cured by a heating device. Accurate adjustment devices permit the optimum working mode according to speed, temperature, glue, and thickness of the veneer Technical Information: Throat clearance mm 1000 Veneer thickness approx. mm 0,4 ÷ 1,5 (2,5*) Width of veneer strips from mm 45 Min. length of veneer strips mm 350 Glue type Urea / Urea + PVA Feed speed approx. m/min. 10 - 30 Heating temperature up to 230 degreesC Length of heating area mm 1000 Total connected load kW 3,33 Power consumption approx. kW 3,33 Air consumption Nl/min 5 Compressed air pressure bar 6 ÷ 8 Flat veneers subject to joining tests (2,5*) with pre-glued veneer The machine permits the longitudinal splicing of veneer sheets by applying glue on their edge. Immediately afterwards the veneer will be passing through a heated zone in order to activate the glue reaction: the glue will be hardening thus bonding the veneer sheets. The integrated glueing device allows the joining by one only process. It's also possible to bond pre-glued veneer sheets. Complete with - Integrated glueing device - liftable infeed rolls - control panel with controls of the feed speed, infeed pressure, heating temperatures, chain pressure, heating bar pressure -key pads of the electronic devices for the control of the temperatures - guide blade with pressure wing - feeding discs with compensation device for different thicknesses of the veneer sheetsaccurate adjustment of the start point and stop point by means of one brush-switch. The motor-start is automatic, when the operator inserts the veneer sheets to be joined - the feeding device is maintenance free thanks to self lubricating components - maintenance book - service tools - EC safety conformityLead Time: 92 Days£ Enquire -
- Arm length 1000mm
- Veneer thickness 0.4 - 1.5mm
- Feed speed 8 - 18m/min
Lead Time: 63 Days£10,350.00£12,420.00 -
- Arm length useful throat depth 1200mm
- Veneer thickness 0.4 - 2mm
- Feed speed 10 - 40m/min
Lead Time: 63 Days£ Enquire -
- Veneer Thickness (depending on condition) approx. 0.5 ~ 5.0 mm
- Veneer Strip Length min. 350 mm
- Veneer Strip Width min. 55 mm
Lead Time: 90 Days£ Enquire
