Play Video


Sedgwick TES Single End Tenoner 3 head 3ph

Sedgwick TES 3 Head Tenoning Machine [3 phase] - A flexible tenoning machine with three heads. Each head is independently adjustable to allow you to produce either square shouldered tenons, offset tenons or mitred tenons. The main heads are equipped with digital readouts with 0.1mm resolution allowing you to set up quickly and accurately in minutes.

Profiled scribing cutters and limitors can be fitted into the 'combi' tenon heads or a wide variety of optional tooling is available for the third shaft allowing the rapid production of finger joints, storm proof or scribed tenons.

This is an ideal machine for small to medium sized workshops - compact and easy to use. The machine is supplied complete with blocks to take disposable TC cutters on the first 2 heads.
Sedgwick logo

Was: £7,914.00

Now Only Excl. VAT: £5,935.00 Incl. VAT: £7,122.00

  • This product is in stock and available for immediate delivery.
  • Part Number: SETES3
Lease from only
£30.91 per week

Leasing plans are for
UK businesses only
and subject to status

Product Description
  • Timber capacity 130 x 310mm
  • Timber capacity with fence
  • at 45 degrees 130 x 250mm
  • Maximum tenon length 155mm
  • Maximum length of tenon 2 passes 205mm
  • Vertical adjustment bottom block 50mm
  • Vertical adjustment top block 100mm
  • Horizontal adjustment top block + / - 32mm
  • Sliding table size 800 x 310mm
  • Table working height 860mm
  • Main cutter head diameters 175mm
  • Main cutterhead motors 3hp each
  • Scribing spindle motor power 5.5hp
  • Scribing spindle diameter 30mm, end tapped M12, 8mm k/way
  • Effective scribing shaft length 75mm
  • Vertical movement scribing shaft 95mm
  • Horizontal movement scribing shaft30mm
  • Maximum tooling diameter 210mm
  • Extraction outlets 2 x 150mm (2800cmh)
  • Weight 470kg
  • Shipping dimensions 1320 x 1020 x H1550mm
  • Machine available as two head version (no separate scribing facility) and in 240v
  • Machines equipped as standard with:
  • - disposable TCT tip cutterheads
  • - cast iron frame
  • - full CE regulations
  • - direct drive to heads
  • - position indicators to rise & fall and offset of tenon heads
  • - spec for crating if required 1320 x 1020 x 1550mm, gross weight 410kg
  • Scribe head is available on request at an additional cost:
  • Code: WH100a00020
Additional Information
Additional Information
Part Number SETES3
Manufacturer Sedgwick

Write Your Own Review

You're reviewing: Sedgwick TES Single End Tenoner 3 head 3ph

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Your Rating