Sold & Discontinued Machines
(368 Products)
-
This compressor uses extra hard wearing; slow running pumps with after coolers as well as die-cast aluminium heads and cast-iron cylinders to provide air on demand over a long working life. The compressors are suitable for heavy; continuous operation and are ideal for workshops and professional use.
- 4.0 hp motor - 230v (16amp) supply
- Slow running belt for smooth; efficient operation
- 150 litre air receiver
- Piston displacement 18.0 CFM - maximum pressure 10 bar
- Oil lubricated
This compressor uses extra hard wearing; slow running pumps with after coolers as well as die-cast aluminium heads and cast-iron cylinders to provide air on demand over a long working life. The compressors are suitable for heavy; continuous operation and are ideal for workshops and professional use. 4.0 hp motor - 230v (16amp) supplySlow running belt for smooth; efficient operation150 litre air receiverPiston displacement 18.0 CFM - maximum pressure 10 barOil lubricated
- PISTON DISPLACEMENT: 18CFM
- INPUT VOLTAGE: 230v
50Hz - FUSE RATING: 16amp
- MOTOR: 4hp
- RECEIVER TANK SIZE: 150 litres
- MAX. PRESSURE: 10 bar
Lead Time: 13 DaysList £1,431.60£750.00Inc Vat £900.00
This compressor uses extra hard wearing; slow running pumps with after coolers as well as die-cast aluminium heads and cast-iron cylinders to provide air on demand over a long working life. The compressors are suitable for heavy; continuous operation and are ideal for workshops and professional use.- 3.0 hp motor - 230v (13amp) supply
- Slow running belt for smooth; efficient operation
- 150 litre air receiver
- Piston displacement 14.0 CFM - maximum pressure 10 bar
- Oil lubricated
- PISTON DISPLACEMENT: 14CFM
- INPUT VOLTAGE: 230v 50Hz
- FUSE RATING: 13amp
- MOTOR: 3hp
- RECEIVER TANK SIZE: 150 litres
- MAX. PRESSURE: 10 bar
Lead Time: 13 DaysList £1,255.20£650.00Inc Vat £780.00
This compressor uses extra hard wearing; slow running pumps with after coolers as well as die-cast aluminium heads and cast-iron cylinders to provide air on demand over a long working life. The compressors are suitable for heavy; continuous operation and are ideal for workshops and professional use.
- 3.0 hp motor - 230v (16amp) supply
- Slow running belt for smooth; efficient operation
- 200 litre air receiver
- Piston displacement 16.0 CFM - maximum pressure 10 bar
- Oil lubricated
This compressor uses extra hard wearing; slow running pumps with after coolers as well as die-cast aluminium heads and cast-iron cylinders to provide air on demand over a long working life. The compressors are suitable for heavy; continuous operation and are ideal for workshops and professional use. 3.0 hp motor - 230v (16amp) supplySlow running belt for smooth; efficient operation150 litre air receiverPiston displacement 16.0 CFM - maximum pressure 10 barOil lubricated
- PISTON DISPLACEMENT: 16CFM
- INPUT VOLTAGE: 230v
50Hz - FUSE RATING: 16amp
- MOTOR: 3hp
- RECEIVER TANK SIZE: 150 litres
- MAX. PRESSURE: 10 bar
Lead Time: 13 DaysList £8,563.20£3,921.00Inc Vat £4,705.20
This compressor uses extra hard wearing; slow running pumps with after coolers as well as die-cast aluminium heads and cast-iron cylinders to provide air on demand over a long working life. The compressors are suitable for heavy; continuous operation and are ideal for workshops and professional use.
- 3.0 hp motor - 230v (13amp) supply
- Slow running belt for smooth; efficient operation
- 200 litre air receiver
- Piston displacement 14.0 CFM - maximum pressure 10 bar
- Oil lubricated
This compressor uses extra hard wearing; slow running pumps with after coolers as well as die-cast aluminium heads and cast-iron cylinders to provide air on demand over a long working life. The compressors are suitable for heavy; continuous operation and are ideal for workshops and professional use. 3.0 hp motor - 230v (13amp) supplySlow running belt for smooth; efficient operation200 litre air receiverPiston displacement 14.0 CFM - maximum pressure 10 barOil lubricated
- PISTON DISPLACEMENT: 14CFM
- INPUT VOLTAGE: 230v
50Hz - FUSE RATING: 13amp
- MOTOR: 3hp
- RECEIVER TANK SIZE: 200 litres
- MAX. PRESSURE: 10 bar
Lead Time: 13 DaysList £1,410.00£730.00Inc Vat £876.00
This compressor is light; easy to transport and has an oil free pump unit entirely made of die-cast aluminium requiring no maintenance. Oil free operation provides clean air - ideal for spraying. No risk of oil spillage; even when the machine is laid on its side in a car boot for example. Designed for ease of use - ideal for DIY and trade users.
- 1.5 hp motor - 230v (13amp) supply
- 24 litre air receiver
- Piston displacement 7 CFM - maximum pressure 10 bar
- Oil - less operation
This compressor is light; easy to transport and has an oil free pump unit entirely made of die-cast aluminium requiring no maintenance. Oil free operation provides clean air - ideal for spraying. No risk of oil spillage; even when the machine is laid on its side in a car boot for example. Designed for ease of use - ideal for DIY and trade users. 1.5 hp motor - 230v (13amp) supply24 litre air receiverPiston displacement 7 CFM - maximum pressure 10 barOil - less operation
- PISTON DISPLACEMENT: 7CFM
- INPUT VOLTAGE: 230V
50Hz - FUSE RATING: 13amp
- MOTOR: 1.5hp - brush
- RECEIVER TANK SIZE: 24 litres
- MAX. PRESSURE: 10 bar
Lead Time: 13 DaysList £205.20£110.00Inc Vat £132.00
This compressor powerful and robust yet light; easy to transport and has an oil lubricated cast-iron pump unit. The crankcase and head are made of aluminium and the unit features a strong plastic cover to protect all internal parts. Ideal for professionals and serious DIY users looking for high performance and a good air reserve.
- 2.5 hp motor - 230v (13amp) supply
- 24 litre air receiver
- Piston displacement 9.5 CFM - maximum pressure 8 bar
- Oil lubricated
This compressor powerful and robust yet light; easy to transport and has an oil lubricated cast-iron pump unit. The crankcase and head are made of aluminium and the unit features a strong plastic cover to protect all internal parts. Ideal for professionals and serious DIY users looking for high performance and a good air reserve. 2.5 hp motor - 230v (13amp) supply24 litre air receiverPiston displacement 9.5 CFM - maximum pressure 8 barOil lubricated
- PISTON DISPLACEMENT: 9.5CFM
- INPUT VOLTAGE: 230V
50Hz - FUSE RATING: 13amp
- MOTOR: 2.5hp - induction
- RECEIVER TANK SIZE: 24 litres
- MAX. PRESSURE: 8 bar
Lead Time: 13 Days£ Enquire
SIP FX-EH Professional Mobile Welding Fume Extractor - 05802 Barcode: 5012713058020 | Product Code: SIP-05802 | MPN: 05802 The SIP FX-EH Professional Mobile Welding Fume Extractor efficiently and safely removes harmful toxic welding fumes, filtering them and returning clear air into your environment, giving added peace-of-mind that your garage or workshop remains protected and safe. Complying with all current regulations for weldable materials including mild steel, this Local Exhaust Ventilator (LEV) is an essential for any welding environment. 2500mtr?/hr max. flow rate and 1200mtr?/hr max. suction 3mtr flexible arm for easy adjustment and simple positioning Heavy-duty 3-stage effective filtration up to 99. 5%: - Filter Stage 1: Metallic Spark Arrestors G25% - Filter Stage 2: Corrugated Polyester Fibre Prefilter - Filter Stage 3: Adjustable Filter H13 HEPA 95. 5% Harmful fumes are removed through filters with clean air returned Ensures workshops are protected from potentially harmful toxic fumes High performance centrifugal fan encased in a soundproof compartment Complies with all current regulations on weldable materials Castor-mounted steel casing with powder-coated finish SIP 2-Year Standard Silver Warranty Manufactured in ItalyLead Time: 13 DaysList £2,601.89£1,843.00Inc Vat £2,211.60
The SIP FX-WM Professional Wall-Mounted Welding Fume Extractor safely removes harmful toxic welding fumes, filtering them and returning clear air into your environment, giving added peace-of-mind that your garage or workshop remains protected and safe. 2x high-quality 3mtr flexible arms for adjustment Heavy-duty 3-stage effective filtration up to 99.5% Centrifugal extraction fan in a soundproof compartment Complies with all current weldable material regulations Compact wall-mounted design and easy self-installationLead Time: 13 DaysList £4,044.00£3,088.00Inc Vat £3,705.60
Superb general purpose high pressure; suction fed spray gun. Comes complete with a cleaning brush and air inlet adaptor. This versatile spray gun produces excellent results in a variety of applications.- Fully adjustable fluid output - for maximum efficiency in paint consumption
- Fully adjustable fan control
- Large 750 cc pot for longer periods of constant use
- 1.5mm nozzle
- Air inlet - 1/4à BSP
- Air consumption 6.5 CFM
- TYPE OF FEED: SUCTION
- STANDARD NOZZLE î MM: 1.5
- OPERATING PRESSURE BAR: 4.5-6
- AVERAGE AIR CONSUMPTION CFM: 6.5
- PAINT CAPACITY CC: 750
Lead Time: 13 DaysList £31.06£22.00Inc Vat £26.40
The SIP RS11-08-270BD/RD is a belt-driven rotary screw uses several powerful components including efficient IE3 motor, Italian-made FS26 air end, and refrigeration dryer for a complete compressed air solution. Designed for a range of professional and industrial applications. KEY FEATURES Electronic ETM II control with digital display; easy-to-use and reliable Quality IE3 premium efficiency motor for reduced costs and emissions Italian-manufactured FS26 TF air end delivers high-quality constant airflow Silenced cabinet enclosure reduces noise and maintains temperature Integrated refrigation dryer provides cooler air and reduced moisture Digital display shows pressure, hours, and temperature ranges POLY-V belt-driven transmission for lower power losses Front and rear access panels for easy servicing and maintenance 100% UK tested by SIP before despatch SIP 2-Year Standard Silver Warranty Manufactured in Italy This unit requires a Site Survey Self Assessment form to be filled in prior to order acceptance. Technicial Specification: Input Supply: 400v (40A) 3-PHASE Motor Power: 15hp (11kW) IE3 Receiver Size: 270ltr Controller Type: ETM II Starter System Type: Star Delta Refrigeration Dryer: 230v (13A) Free Air Delivery (FAD): 58.20CFM (1648ltr/min) Max. Air Pressure: 116psi (8bar) Connection Size: 3/4" Noise Level: 69dB(A) Gross Weight: 359.00kg Packaged Dimensions: 1680(H) x 1720(W) x 750mm(D)Lead Time: 13 DaysList £9,981.60£5,450.00Inc Vat £6,540.00
The optional Sliding Carriage for the 10" Cast Iron Table Saw increases the table saw capacity to cross-cut 8.0ft x 4.0ft sheets in one pass. Quick release clamp Heavy-duty construction Pre-set stops at 90 degrees & 45 degrees Large cast iron table working area Micro adjustable cross-cut stop at 1.0 metre Suitable for the following: 01332 - 10" Cast Iron Table SawLead Time: 5 DaysList £1,210.80£630.00Inc Vat £756.00
Bessey German quality Standard Duty Clamp Opening 250mm Depth 120mmLead Time: 7 Days
Trend 10/23X3/8TC D=23 mm C=25 mm A=105 degrees Shank Diameter=3/8 inch . Especially designed bevel cutter for routing Corian, which is used in many bathrooms and kitchens.Lead Time: 5 Days£ Enquire£ Enquire
Trend 10/97X1/4TC D=42 mm C=12.7 mm C2=4 mm A=45 degrees Shank Diameter=1/4 inch Timber thickness min.=8.0 Timber thickness max.=12.0 . Machining of this joint is carried out by routing one piece with the inside face on the table. The matching corner inside face is machined upright against the fence. Make sure that the cutter is centred on the workpiece. The cutLead Time: 5 Days£ Enquire£ Enquire
Trend 11/41X1/2TC D=3/4 inch D=19.1 mm C=16.0 B=19.1 mm A=45 degrees Shank Diameter=1/2 inch . Template thickness should be at least 5mm thicker than cutter cut length of cutter. Approx. 1.0mm flat will be found on nose.Lead Time: 5 Days£ Enquire£ Enquire
Trend 11/60X12MMTC D=32 mm C=25 mm B=21.8.0 A=78 degrees Shank Diameter=12.0 . Especially designed bevel cutter for routing Corian and similar luxury 'marble like, material which is used in many bathrooms and kitchens. Tool Ref. 11/60 is designed to trim surface to an undermount bowl.Lead Time: 5 Days£ Enquire£ Enquire
Trend 12/3X8MMTC D=6.0 C=15 mm R=3 mm OL=69 mm Shank Diameter=8.0 . For coves and part of a rule joint.Lead Time: 5 Days£ Enquire£ Enquire
Trend 13/41X1/4TC D=15.9 mm C=11 mm OL=55 mm B=16.0 R=5/16 inch R=7.9 mm Shank Diameter=1/4 inch . Template thickness should be 5mm thicker than cut length of cutter.Lead Time: 5 Days£ Enquire£ Enquire
Trend 17/01X1/4TC D=1/2 inch D=12.7 mm C=3/8 inch C=9.5 mm B=12.7 mm R=3 mm Shank Diameter=1/4 inch . Template thickness should be 5mm thicker than cut length of cutter.Lead Time: 5 Days£ Enquire£ Enquire
Trend 18/1X1/2TC D=35 mm D2=12.5 mm C=3/8 inch C=9.5 mm R=3.2 mm Shank Diameter=1/2 inch . Panel raisers can be used with guide bush templates for decorative work on panel doors etc.Lead Time: 5 Days£ Enquire£ Enquire
Trend 18/20X8MMTC D=45 mm D2=11 mm C=17 mm A=10 degrees Shank Diameter=8.0 . Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised Panel cutters run best at lower spLead Time: 5 Days£ Enquire£ Enquire
Trend 18/23X1/2TC D=50 mm D2=26.0 C=14 mm R=6.0 Shank Diameter=1/2 inch . Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised Panel cutters run best at lower spLead Time: 5 Days£ Enquire£ Enquire
Trend 18/24X8MMTC D=45 mm D2=14 mm C=14 mm R=12.0 Shank Diameter=8.0 . Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised Panel cutters run best at lower spLead Time: 5 Days£ Enquire£ Enquire
Trend 18/26X8MMTC D=45 mm C=13.5 mm R=6.3 mm R2=3.2 mm A=3 degrees Shank Diameter=8.0 . Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised Panel cutters run best at lower spLead Time: 5 Days£ Enquire£ Enquire
Trend 18/30X1/2TC D=29 mm D2=10.0 C=11 mm A=30 degrees Shank Diameter=1/2 inch . For bevelling and panelling applications.Lead Time: 5 Days£ Enquire£ Enquire
Trend 18/50X1/4TC D=12.0 C=7 mm R=2 mm R2=4 mm Shank Diameter=1/4 inch . To create profiles in the face or edge of drawer fronts and cabinet doors.Lead Time: 5 Days£ Enquire£ Enquire
Trend 18/51X1/2TC D=19 mm C=1/2 inch C=12.7 mm R=4 mm R2=5 mm Shank Diameter=1/2 inch . To create profiles in the face or edge of drawer fronts and cabinet doors.Lead Time: 5 Days£ Enquire£ Enquire
Trend 18/54X1/2TC D=35 mm C=14 mm B=35 mm R=5.2 mm Shank Diameter=1/2 inch . Ideal for following templates when panelling and profiling in furniture manufacture. It is advisable that the template is at least 5mm thicker than the cut length of the cutter.Lead Time: 5 Days£ Enquire£ Enquire
Trend 18/83X1/2TC D=67 mm C=16.0 B=12.7 mm R=17.5 mm Shank Diameter=1/2 inch . Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised Panel cutters run best at lower spLead Time: 5 Days£ Enquire£ Enquire
Trend 18/92X1/2TC D=1 inch D=25.4 mm C=38.0 R=3 mm R2=8.0 A=85 degrees Shank Diameter=1/2 inch . Shape similar to Ref. 18/82. Suitable panel mould for use with Ref. PSC/3 & PSC/30. 8mm shank tools are for use with medium and heavy duty routersLead Time: 5 Days£ Enquire£ Enquire
Trend 18/96X1/2TC D1=25.4 mm Cut length=44 mm R1=8.0 R2=23 mm R3=5 mm R4=27 mm Shank Diameter=1/2 . Two flute tungsten carbide tipped router cutter for linen fold effect on panels. Allows mock linen fold panels to be produced. Linen fold is a traditional effect used on furniture and panelling. For the scroll effect a shank mounted bLead Time: 5 Days£ Enquire£ Enquire
Trend 19/1X1/4TC D=27 mm D2=8.0 C=16.0 R=4.7 mm Shank Diameter=1/4 inch . Cutters for false panels or edge moulds. Curved work possible in fixed head router and copy follower.Lead Time: 5 Days£ Enquire£ Enquire
Trend 19/2X1/4TC D=33 mm D2=8.0 C=23 mm R=7.2 mm Shank Diameter=1/4 inch . Cutters for false panels or edge moulds. Curved work possible in fixed head router and copy follower.Lead Time: 5 Days£ Enquire£ Enquire
Trend 2/06X1/4TC D1=1/4 inches D1=6.3 mm C=1/2 inches C=12.7 mm Overall length=50 mm Shank Diameter=1/4 inch . Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0Lead Time: 5 Days£ Enquire£ Enquire
