Trend 2/07LX3/8TC D1=3/8 inches
D1=9.5 mm
C=32 mm
Overall length=83 mm
Shank Diameter=3/8 inch . A single flute cutters with extra long shanks.
All the single flute tools have recessed shanks to allow deeper cutting.
Deep grooving, rebating and mortising.
Useful for template work when thickness of template restricts depth.
Trend 2/2X1/4TC D1=1/8 inches
D1=3.2 mm
C=11 mm
Overall length=50 mm
Shank Diameter=1/4 inch
. Eccentric single flute cutters.
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
Cutters with prefix S are Solid Carbide.
Cutters of 2.0mm diameter and below should have a maximum of 1.0mm dep
Trend 2/40X1/2TC D=3/16 inch
D=4.8.0
C=19 mm
OL=64 mm
Shank Diameter=1/2 inch
. Eccentric single flute cutters.
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
Cutters with prefix S are Solid Carbide.
Cutters of 2.0mm diameter and below should have a maximum of 1.0
Trend 2/4X1/4TC D1=3/16 inches
D1=4.8.0
C=11 mm
Overall length=51 mm
Shank Diameter=1/4 inch . Eccentric single flute cutters.
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
Cutters with prefix S are Solid Carbide.
Cutters of 2.0mm diameter and below should have a maximum of 1.0
Trend 2/63X1/2TC D1=5/16 inches
D1=7.9 mm
C=25 mm
Overall length=72 mm
Shank Diameter=1/2 inch
. Eccentric single flute cutters.
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
Cutters with prefix S are Solid Carbide.
Cutters of 2.0mm diameter and below should have a maximum of 1.0
Trend 2/66LX12MM D=5/16 inch
D=8.0
C=19 mm
C2=19 mm
OL=71 mm
Shank Diameter=12.0
. Single flute cutter with an extra long shank.
Deep grooving, rebating and mortising.
Useful for template work when thickness of template restricts depth.
Extra care must be taken to avoid breakage.
Take more passes than usual, and on
Trend 2/6LX1/4TC D=1/4 inch
D=6.3 mm
C=19 mm
C2=19 mm
OL=70 mm
Shank Diameter=1/4 inch
. A single flute cutters with extra long shanks.
All the single flute tools have recessed shanks to allow deeper cutting.
Deep grooving, rebating and mortising.
Useful for template work when thickness of template restricts depth.
Trend 2/82X1/2TC D1=1/2 inches
D1=12.7 mm
C=50 mm
Overall length=108.0
Shank Diameter=1/2 inch
. Eccentric single flute cutters.
Cutters are chosen for fast free cutting, when cutting speed takes preference over finish.
Cutters with prefix S are Solid Carbide.
Cutters of 2.0mm diameter and below should have a maximum of 1.0
Trend 20/51X1/2TC D=1 3/8 inch
D=35 mm
C=43/64 inch
C=17 mm
R=3 mm
Shank Diameter=1/2 inch
. For use with full length tenons, in conjunction with set Ref. 20/50.
Trend 22/7X1/2TC D=40 mm
C=9 mm
C2=11 mm
R=22 mm
R2=4 mm
Shank Diameter=1/2 inch
. Flat Roman Ogee, for raised panelling or edge moulding. Used for decorative capping on hand rails.
Trend 24/3X1/2TC D=3/4 inch
D=19.1 mm
C=15 mm
Taper range approx.=18.3 to 19.5 mm
Shank Diameter=1/2 inch
. A Tapered plug ensures an exceptionally tight fit is achieved. Tapered plug cutters with Tungsten Carbide Tips will produce many hundreds of plugs before resharpening is required. For use in drilling machines at a recommended speed
Trend 25/3X8MMTC D=28.7 mm
C=17.7 mm
B=9.5 mm
B2=12.7 mm
B3=16.0
R=6.35 mm
Shank Diameter=8.0
Rule joint
Timber thickness min.=7 mm
Timber thickness max.=10.0
. These 'Eight in One' Cutters sets have been designed to cut eight different profiles.
Can be used portably or in a router table.
Use B2 for a 1.6mm quirk and B3 for a round over.
Trend 25/5X8MMTC D=34.9 mm
C=1 inch
C=25.5 mm
B=9.5 mm
B2=12.7 mm
B3=16.0
R=9.5 mm
Shank Diameter=8.0
Rule joint
Timber thickness min.=11 mm
Timber thickness max.=15 mm
. These 'Eight in One' Cutters sets have been designed to cut eight different profiles.
Can be used portably or in a router table.
Use B2 for a 1.6mm quirk and B3 for a round over.
Trend 25/7X1/2TC D=44.5 mm
C=33.4 mm
B=9.5 mm
B2=12.7 mm
B3=16.0
R=12.7 mm
Shank Diameter=1/2 inch
Rule joint
Timber thickness min.=15 mm
Timber thickness max.=20 mm . These 'Eight in One' Cutters sets have been designed to cut eight different profiles.
Can be used portably or in a router table.
Use B2 for a 1.6mm quirk and B3 for a round over.
Trend 28/25X1/4TC D=9 mm
C=9 mm
R=2.5 mm
Shank Diameter=1/4 inch
Recommended speed=1000-20000 rpm . For decorative use on carvings and ornate work. Material around pipscan be removed with a straight flute cutter or with a chisel. Smaller pips sizes should be used with close grain timber. Cutters have small diameters to allow clos
Trend 28/2X1/4TC D=8.0
C=9 mm
R=2 mm
Shank Diameter=1/4 inch
Recommended speed=1000-20000 rpm . For decorative use on carvings and ornate work. Material around pipscan be removed with a straight flute cutter or with a chisel. Smaller pips sizes should be used with close grain timber. Cutters have small diameters to allow clos
Trend 28/3X1/4TC D=10.0
C=8.5 mm
R=3 mm
Shank Diameter=1/4 inch
Recommended speed=1000-20000 rpm
. For decorative use on carvings and ornate work. Material around pipscan be removed with a straight flute cutter or with a chisel. Smaller pips sizes should be used with close grain timber. Cutters have small diameters to allow clos
Trend 28/4X1/4TC D=12.0
C=9 mm
R=4 mm
Shank Diameter=1/4 inch
Recommended speed=1000-20000 rpm . For decorative use on carvings and ornate work. Material around pipscan be removed with a straight flute cutter or with a chisel. Smaller pips sizes should be used with close grain timber. Cutters have small diameters to allow clos
Trend 3/20X3/8TC D=1/4 inch
D=6.3 mm
C=16.0
OL=57 mm
Shank Diameter=3/8 inch
. TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
All cutters above and including 9.5mm diameter, have TCT plunge centre tips.
Trend 3/2X8MMTC D=15/64 inch
D=6.0
C=16.0
OL=54 mm
Shank Diameter=8.0
. TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
All cutters above and including 9.5mm diameter, have TCT plunge centre tips.
Trend 3/3X8MMTC D=9/32 inch
D=7 mm
C=19 mm
OL=56.0
Shank Diameter=8.0
. TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
All cutters above and including 9.5mm diameter, have TCT plunge centre tips.
Trend 3/45X8MMTC D=8.9 mm
C=25 mm
OL=70 mm
Shank Diameter=8.0
. TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
All cutters above and including 9.5mm diameter, have TCT plunge centre tips.
Trend 3/54X1/2TC D=3/8 inch
D=9.5 mm
C=19 mm
OL=65 mm
Shank Diameter=1/2 inch
. TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
All cutters above and including 9.5mm diameter, have TCT plunge centre tips.
Trend 3/55LX8MMTC D=3/8 inch
D=9.5 mm
C=32 mm
C2=19 mm
OL=79 mm
Shank Diameter=8.0
. A two flute cutters with extra long shanks.
Deep grooving, rebating and mortising.
Useful for template work when thickness of template restricts depth.
Extra care must be taken to avoid breakage.
Take more passes than usual, an
Trend 3/73DX12MMTC D=12 inch
D=12.0
C=50 mm
Shank Diameter=12.0
Please note: This cutter is especially suited for drilling. . TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
All cutters above and including 9.5mm diameter, have TCT plunge centre tips.
Trend 3/73X12MMTC D=12 inch
D=12.0
C=50 mm
OL=109 mm
Shank Diameter=12.0
Please note: This cutter does not have a TCT centre tip and is not suitable for plunging abrasive materials. . TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
Two flutes give a clean finish to cut edges.
Trend 3/83DUX1/2TC D=1/2 inch
D=12.7 mm
C=48.0
OL=99 mm
Shank Diameter=1/2 inch
Please note: This cutter is especially suited for drilling. . Ultimate DnamicX2 new generation router cutter.
Long lasting straight router cutter specially designed for laminated boards, MDF, panels and solid wood.
Approximately 50% increase in cutter life.
Ultra submicron DnamicX2 Tungsten Carb
Trend 30/4X1/4TC D=3/4 inch
D=19.1 mm
C=1/4 inch
C=6.3 mm
B=12.7 mm
E=3.2 mm
Shank Diameter=1/4 inch
. To produce an undercut on relief lettering to create a more aesthetic appearance, as well as for edge grooving.
Trend 31/31X8MMTC D=11.3 mm
C=16.0
A=99 degrees
OL=66.0
Shank Diameter=8.0
. Cutters for use with the Trend DC400 Dovetail Jig. These cutters have extra long shanks.
Trend 31/32X1/4TC D=11.3 mm
C=13 mm
OL=63 mm
A=101 degrees
Shank Diameter=1/4 inch
. Cutters for use with the Trend DC400 Dovetail Jig. These cutters have extra long shanks.
Trend 31/32X8MMTC D=11.3 mm
C=13 mm
OL=63 mm
A=101 degrees
Shank Diameter=8.0
. Cutters for use with the Trend DC400 Dovetail Jig. These cutters have extra long shanks.
Trend 31/33X1/4TC D=11.3 mm
C=9.5 mm
OL=59 mm
A=104 degrees
Shank Diameter=1/4 inch
. Cutters for use with the Trend DC400 Dovetail Jig. These cutters have extra long shanks.
Trend 31/33X8MMTC D=11.3 mm
C=9.5 mm
OL=59 mm
A=104 degrees
Shank Diameter=8.0
. Cutters for use with the Trend DC400 Dovetail Jig. These cutters have extra long shanks.
Trend 31/34X1/4TC D=11.3 mm
C=6.35 mm
OL=56.0
A=110 degrees
Shank Diameter=1/4 inch
. Cutters for use with the Trend DC400 Dovetail Jig. These cutters have extra long shanks.
Trend 31/34X8MMTC D=11.3 mm
C=6.35 mm
OL=56.0
A=110 degrees
Shank Diameter=8.0
. Cutters for use with the Trend DC400 Dovetail Jig. These cutters have extra long shanks.
Trend 32/14X1/2TC D=25.4 mm
C=25.4 mm
OL=65 mm
A=95 degrees
Shank Diameter=1/2 inch
. Purpose made for stair housing jigs.
Ensures tight fit of tread in string.
Trend 33/21X1/2 OL=66.0
Thread=M12 x 1.0 mm
Spigot length incl thread=25 mm
Spigot thread length=15 mm
Shank Diameter=1/2 inch . Slotters with M12x1.0 threaded bore enables flush recessing in the corner such as for weather proofing.
Spacers are supplied to ensure the minimal threaded arbor protrudes below the slotter. Arbor 33/20 enables 12mm bore guide beari
Trend 33/24X1/2 OL=61 mm
Thread=M12 x 1.75 mm
Spigot length incl thread=20 mm
Spigot thread length=15 mm
Shank Diameter=1/2 inch
Please note
Does not come with spacers . A threaded arbor for use with a M12 x 1.75mm bore groover.
Trend 33/26X1/2 OL=66.0
Thread=M12 x 1.0 mm
Spigot length incl thread=25 mm
Spigot thread length=20 mm
Shank Diameter=1/2 inch
Please note
Does not come with spacers
. A threaded arbor for use with a M12x1.0mm bore groover.
Trend 33/27X1/2 OL=76.0
Thread=M12 x 1.0 mm
Spigot length incl thread=35 mm
Spigot thread length=27 mm
Shank Diameter=1/2 inch
Please note
Does not come with spacers . A threaded arbor for use with a M12x1.0mm bore groover.
Trend 33/30X3/8 OL=67 mm
Thread=UNF 5/16
Spigot dia.=8.0
Spigot length incl thread=34 mm
Spigot thread length=10.5 mm
Shank Diameter=3/8 inch . Replacement arbor for an 8mm bore tool.
Trend 33/31X1/2 OL=87 mm
Thread=UNF 5/16
Spigot dia.=8.0
Spigot length incl thread=47 mm
Spigot thread length=14 mm
Shank Diameter=1/2 inch
. Replacement arbor for the PSC/101X1/2TC.
Trend 33/60X3/8 OL=76.0
Spigot dia.=1/4 inch
Spigot dia.=6.35 mm
Spigot length incl thread=34 mm
Spigot thread length=11 mm
Shank diameter=3/8 inch . Standard duty arbor with 1/4 inch spindle and spacers.
Enables mounting of 1/4 inch bore slotters with and without bearings in a variety of positions.
Use shims/spacers to prevent bearings with larger diameters, touching the tips o
Trend 333X1/2TC D=45 mm
D2=34 mm
C=8.0 mm
C1=2.75 mm
C2=2.5 mm
OL=58.0
B=28.0
Shank Diameter=1/2 inch . Refs. 332 and 332 are designed to accommodate quick Fit smoke seal brush strips. The groove is cut in the door edge rather than the frame.
Ref. 332 has no bearing guide.
Ref. 333 comes complete with a guide bearing to reduce setting-
Trend 34/01TC D=41.3 mm
Kerf=4.0 mm
No. of Teeth=4
. All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.
Trend 34/17TC D=40 mm
Bore=M12
Kerf=20 mm
No. of Teeth=2
. These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.
Trend 2/07LX3/8TC D1=3/8 inches D1=9.5 mm C=32 mm Overall length=83 mm Shank Diameter=3/8 inch . A single flute cutters with extra long shanks. All the single flute tools have recessed shanks to allow deeper cutting. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts depth.Lead Time: 11 Days£ Enquire£ Enquire
Trend 2/2X1/4TC D1=1/8 inches D1=3.2 mm C=11 mm Overall length=50 mm Shank Diameter=1/4 inch . Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depLead Time: 11 Days£ Enquire£ Enquire
Trend 2/40X1/2TC D=3/16 inch D=4.8.0 C=19 mm OL=64 mm Shank Diameter=1/2 inch . Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0Lead Time: 11 Days£ Enquire£ Enquire
Trend 2/4X1/4TC D1=3/16 inches D1=4.8.0 C=11 mm Overall length=51 mm Shank Diameter=1/4 inch . Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0Lead Time: 11 Days£ Enquire£ Enquire
Trend 2/63X1/2TC D1=5/16 inches D1=7.9 mm C=25 mm Overall length=72 mm Shank Diameter=1/2 inch . Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0Lead Time: 11 Days£ Enquire£ Enquire
Trend 2/66LX12MM D=5/16 inch D=8.0 C=19 mm C2=19 mm OL=71 mm Shank Diameter=12.0 . Single flute cutter with an extra long shank. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage. Take more passes than usual, and onLead Time: 11 Days£ Enquire£ Enquire
Trend 2/6LX1/4TC D=1/4 inch D=6.3 mm C=19 mm C2=19 mm OL=70 mm Shank Diameter=1/4 inch . A single flute cutters with extra long shanks. All the single flute tools have recessed shanks to allow deeper cutting. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts depth.Lead Time: 11 Days£ Enquire£ Enquire
Trend 2/82X1/2TC D1=1/2 inches D1=12.7 mm C=50 mm Overall length=108.0 Shank Diameter=1/2 inch . Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0Lead Time: 11 Days£ Enquire£ Enquire
Trend 20/51X1/2TC D=1 3/8 inch D=35 mm C=43/64 inch C=17 mm R=3 mm Shank Diameter=1/2 inch . For use with full length tenons, in conjunction with set Ref. 20/50.Lead Time: 11 Days£ Enquire£ Enquire
Trend 22/01X1/4TC D=26.0 C=6.0 C2=10.0 R=2 mm R2=6.0 Shank Diameter=1/4 inch . Edge moulds of classic proportions. Used to obtain decorative channels.Lead Time: 11 Days£ Enquire£ Enquire
Trend 22/7X1/2TC D=40 mm C=9 mm C2=11 mm R=22 mm R2=4 mm Shank Diameter=1/2 inch . Flat Roman Ogee, for raised panelling or edge moulding. Used for decorative capping on hand rails.Lead Time: 11 Days£ Enquire£ Enquire
Trend 24/3X1/2TC D=3/4 inch D=19.1 mm C=15 mm Taper range approx.=18.3 to 19.5 mm Shank Diameter=1/2 inch . A Tapered plug ensures an exceptionally tight fit is achieved. Tapered plug cutters with Tungsten Carbide Tips will produce many hundreds of plugs before resharpening is required. For use in drilling machines at a recommended speedLead Time: 11 Days£ Enquire£ Enquire
Trend 25/3X8MMTC D=28.7 mm C=17.7 mm B=9.5 mm B2=12.7 mm B3=16.0 R=6.35 mm Shank Diameter=8.0 Rule joint Timber thickness min.=7 mm Timber thickness max.=10.0 . These 'Eight in One' Cutters sets have been designed to cut eight different profiles. Can be used portably or in a router table. Use B2 for a 1.6mm quirk and B3 for a round over.Lead Time: 11 Days£ Enquire£ Enquire
Trend 25/5X8MMTC D=34.9 mm C=1 inch C=25.5 mm B=9.5 mm B2=12.7 mm B3=16.0 R=9.5 mm Shank Diameter=8.0 Rule joint Timber thickness min.=11 mm Timber thickness max.=15 mm . These 'Eight in One' Cutters sets have been designed to cut eight different profiles. Can be used portably or in a router table. Use B2 for a 1.6mm quirk and B3 for a round over.Lead Time: 11 Days£ Enquire£ Enquire
Trend 25/7X1/2TC D=44.5 mm C=33.4 mm B=9.5 mm B2=12.7 mm B3=16.0 R=12.7 mm Shank Diameter=1/2 inch Rule joint Timber thickness min.=15 mm Timber thickness max.=20 mm . These 'Eight in One' Cutters sets have been designed to cut eight different profiles. Can be used portably or in a router table. Use B2 for a 1.6mm quirk and B3 for a round over.Lead Time: 11 Days£ Enquire£ Enquire
Trend 28/25X1/4TC D=9 mm C=9 mm R=2.5 mm Shank Diameter=1/4 inch Recommended speed=1000-20000 rpm . For decorative use on carvings and ornate work. Material around pipscan be removed with a straight flute cutter or with a chisel. Smaller pips sizes should be used with close grain timber. Cutters have small diameters to allow closLead Time: 11 Days£ Enquire£ Enquire
Trend 28/2X1/4TC D=8.0 C=9 mm R=2 mm Shank Diameter=1/4 inch Recommended speed=1000-20000 rpm . For decorative use on carvings and ornate work. Material around pipscan be removed with a straight flute cutter or with a chisel. Smaller pips sizes should be used with close grain timber. Cutters have small diameters to allow closLead Time: 11 Days£ Enquire£ Enquire
Trend 28/3X1/4TC D=10.0 C=8.5 mm R=3 mm Shank Diameter=1/4 inch Recommended speed=1000-20000 rpm . For decorative use on carvings and ornate work. Material around pipscan be removed with a straight flute cutter or with a chisel. Smaller pips sizes should be used with close grain timber. Cutters have small diameters to allow closLead Time: 11 Days£ Enquire£ Enquire
Trend 28/4X1/4TC D=12.0 C=9 mm R=4 mm Shank Diameter=1/4 inch Recommended speed=1000-20000 rpm . For decorative use on carvings and ornate work. Material around pipscan be removed with a straight flute cutter or with a chisel. Smaller pips sizes should be used with close grain timber. Cutters have small diameters to allow closLead Time: 11 Days£ Enquire£ Enquire
Trend 3/20X3/8TC D=1/4 inch D=6.3 mm C=16.0 OL=57 mm Shank Diameter=3/8 inch . TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.Lead Time: 11 Days£ Enquire£ Enquire
Trend 3/2X8MMTC D=15/64 inch D=6.0 C=16.0 OL=54 mm Shank Diameter=8.0 . TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.Lead Time: 11 Days£ Enquire£ Enquire
Trend 3/3X8MMTC D=9/32 inch D=7 mm C=19 mm OL=56.0 Shank Diameter=8.0 . TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.Lead Time: 11 Days£ Enquire£ Enquire
Trend 3/45X8MMTC D=8.9 mm C=25 mm OL=70 mm Shank Diameter=8.0 . TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.Lead Time: 11 Days£ Enquire£ Enquire
Trend 3/54X1/2TC D=3/8 inch D=9.5 mm C=19 mm OL=65 mm Shank Diameter=1/2 inch . TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.Lead Time: 11 Days£ Enquire£ Enquire
Trend 3/55LX8MMTC D=3/8 inch D=9.5 mm C=32 mm C2=19 mm OL=79 mm Shank Diameter=8.0 . A two flute cutters with extra long shanks. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage. Take more passes than usual, anLead Time: 11 Days£ Enquire£ Enquire
Trend 3/73DX12MMTC D=12 inch D=12.0 C=50 mm Shank Diameter=12.0 Please note: This cutter is especially suited for drilling. . TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.Lead Time: 11 Days£ Enquire£ Enquire
Trend 3/73X12MMTC D=12 inch D=12.0 C=50 mm OL=109 mm Shank Diameter=12.0 Please note: This cutter does not have a TCT centre tip and is not suitable for plunging abrasive materials. . TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges.Lead Time: 11 Days£ Enquire£ Enquire
Trend 3/83DUX1/2TC D=1/2 inch D=12.7 mm C=48.0 OL=99 mm Shank Diameter=1/2 inch Please note: This cutter is especially suited for drilling. . Ultimate DnamicX2 new generation router cutter. Long lasting straight router cutter specially designed for laminated boards, MDF, panels and solid wood. Approximately 50% increase in cutter life. Ultra submicron DnamicX2 Tungsten CarbLead Time: 11 Days£ Enquire£ Enquire
Trend 30/4X1/4TC D=3/4 inch D=19.1 mm C=1/4 inch C=6.3 mm B=12.7 mm E=3.2 mm Shank Diameter=1/4 inch . To produce an undercut on relief lettering to create a more aesthetic appearance, as well as for edge grooving.Lead Time: 11 Days£ Enquire£ Enquire
Trend 31/31X8MMTC D=11.3 mm C=16.0 A=99 degrees OL=66.0 Shank Diameter=8.0 . Cutters for use with the Trend DC400 Dovetail Jig. These cutters have extra long shanks.Lead Time: 11 Days£ Enquire£ Enquire
Trend 31/32X1/4TC D=11.3 mm C=13 mm OL=63 mm A=101 degrees Shank Diameter=1/4 inch . Cutters for use with the Trend DC400 Dovetail Jig. These cutters have extra long shanks.Lead Time: 11 Days£ Enquire£ Enquire
Trend 31/32X8MMTC D=11.3 mm C=13 mm OL=63 mm A=101 degrees Shank Diameter=8.0 . Cutters for use with the Trend DC400 Dovetail Jig. These cutters have extra long shanks.Lead Time: 11 Days£ Enquire£ Enquire
Trend 31/33X1/4TC D=11.3 mm C=9.5 mm OL=59 mm A=104 degrees Shank Diameter=1/4 inch . Cutters for use with the Trend DC400 Dovetail Jig. These cutters have extra long shanks.Lead Time: 11 Days£ Enquire£ Enquire
Trend 31/33X8MMTC D=11.3 mm C=9.5 mm OL=59 mm A=104 degrees Shank Diameter=8.0 . Cutters for use with the Trend DC400 Dovetail Jig. These cutters have extra long shanks.Lead Time: 11 Days£ Enquire£ Enquire
Trend 31/34X1/4TC D=11.3 mm C=6.35 mm OL=56.0 A=110 degrees Shank Diameter=1/4 inch . Cutters for use with the Trend DC400 Dovetail Jig. These cutters have extra long shanks.Lead Time: 11 Days£ Enquire£ Enquire
Trend 31/34X8MMTC D=11.3 mm C=6.35 mm OL=56.0 A=110 degrees Shank Diameter=8.0 . Cutters for use with the Trend DC400 Dovetail Jig. These cutters have extra long shanks.Lead Time: 11 Days£ Enquire£ Enquire
Trend 32/14X1/2TC D=25.4 mm C=25.4 mm OL=65 mm A=95 degrees Shank Diameter=1/2 inch . Purpose made for stair housing jigs. Ensures tight fit of tread in string.Lead Time: 11 Days£ Enquire£ Enquire
Trend 33/21X1/2 OL=66.0 Thread=M12 x 1.0 mm Spigot length incl thread=25 mm Spigot thread length=15 mm Shank Diameter=1/2 inch . Slotters with M12x1.0 threaded bore enables flush recessing in the corner such as for weather proofing. Spacers are supplied to ensure the minimal threaded arbor protrudes below the slotter. Arbor 33/20 enables 12mm bore guide beariLead Time: 11 Days£ Enquire£ Enquire
Trend 33/24X1/2 OL=61 mm Thread=M12 x 1.75 mm Spigot length incl thread=20 mm Spigot thread length=15 mm Shank Diameter=1/2 inch Please note Does not come with spacers . A threaded arbor for use with a M12 x 1.75mm bore groover.Lead Time: 11 Days£ Enquire£ Enquire
Trend 33/26X1/2 OL=66.0 Thread=M12 x 1.0 mm Spigot length incl thread=25 mm Spigot thread length=20 mm Shank Diameter=1/2 inch Please note Does not come with spacers . A threaded arbor for use with a M12x1.0mm bore groover.Lead Time: 11 Days£ Enquire£ Enquire
Trend 33/27X1/2 OL=76.0 Thread=M12 x 1.0 mm Spigot length incl thread=35 mm Spigot thread length=27 mm Shank Diameter=1/2 inch Please note Does not come with spacers . A threaded arbor for use with a M12x1.0mm bore groover.Lead Time: 11 Days£ Enquire£ Enquire
Trend 33/30X12MM OL=67 mm Thread=UNF 5/16 Spigot dia.=8.0 Spigot length incl thread=34 mm Spigot thread length=10.5 mm Shank Diameter=12.0 . Replacement arbor for an 8mm bore tool.Lead Time: 11 Days£ Enquire£ Enquire
Trend 33/30X3/8 OL=67 mm Thread=UNF 5/16 Spigot dia.=8.0 Spigot length incl thread=34 mm Spigot thread length=10.5 mm Shank Diameter=3/8 inch . Replacement arbor for an 8mm bore tool.Lead Time: 11 Days£ Enquire£ Enquire
Trend 33/31X1/2 OL=87 mm Thread=UNF 5/16 Spigot dia.=8.0 Spigot length incl thread=47 mm Spigot thread length=14 mm Shank Diameter=1/2 inch . Replacement arbor for the PSC/101X1/2TC.Lead Time: 11 Days£ Enquire£ Enquire
Trend 33/60X3/8 OL=76.0 Spigot dia.=1/4 inch Spigot dia.=6.35 mm Spigot length incl thread=34 mm Spigot thread length=11 mm Shank diameter=3/8 inch . Standard duty arbor with 1/4 inch spindle and spacers. Enables mounting of 1/4 inch bore slotters with and without bearings in a variety of positions. Use shims/spacers to prevent bearings with larger diameters, touching the tips oLead Time: 11 Days£ Enquire£ Enquire
Trend 333X1/2TC D=45 mm D2=34 mm C=8.0 mm C1=2.75 mm C2=2.5 mm OL=58.0 B=28.0 Shank Diameter=1/2 inch . Refs. 332 and 332 are designed to accommodate quick Fit smoke seal brush strips. The groove is cut in the door edge rather than the frame. Ref. 332 has no bearing guide. Ref. 333 comes complete with a guide bearing to reduce setting-Lead Time: 11 Days£ Enquire£ Enquire
Trend 34/01TC D=41.3 mm Kerf=4.0 mm No. of Teeth=4 . All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.Lead Time: 11 Days£ Enquire£ Enquire
Trend 34/17TC D=40 mm Bore=M12 Kerf=20 mm No. of Teeth=2 . These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.Lead Time: 11 Days£ Enquire£ Enquire