Trend CLT/T9/12 d=12.0
. The collet is a one-piece multi-slit design to provide maximum grip on to the surface of the cutter's shank.
Does not include the collet nut.
Suitable for the Trend T9, CMT 2E, Metabo OF1612, 0FE1815
Trend CLT/T9/6 d=6.0
. The collet is a one-piece multi-slit design to provide maximum grip on to the surface of the cutter's shank.
Does not include the collet nut.
Suitable for the Trend T9, CMT 2E, Metabo OF1612, 0FE1815
Trend CLT/T9/635 d=1/4 inch
d=6.35 mm
. The collet is a one-piece multi-slit design to provide maximum grip on to the surface of the cutter's shank.
Does not include the collet nut.
Suitable for the Trend T9, CMT 2E, Metabo OF1612, 0FE1815
Trend COLL/38 ID=3/8 inch
OD=15.8.0
Hex key=1/16 inch
. Collar Packs are used for cutters with shank mounted bearings.
Packs include one collar, grub screw and hex key.
* This product has been postponed* The nearest alternative which we offer is the KWJ900.
Trend COMBI1002 Length=1200 mm
Width=376.0
Thickness=16.0
Female cut material width loss=23 mm
Weight=9.6kg
End cut=45 degrees
Corner Mitre Joint=22.5 degrees
Peninsula radius=approx. 410.0
Corner radius=approx. 75 mm
Circul . For up to 1000mm wide worktop now with cable tidy insert & circular hinge cut apertures.
A single male and female template in 16mm solid laminate.
Facility to join boards from 450mm to 1000mm wide.
Facility to cut 22.5 degree mitr
Trend DE6278 d=1/2 inch
d=12.7 mm
Elu MOF77, 98, 131, 177(E)
DeWalt DW624, DW625EK, 629
. Replacement collet.
Fits the following machines:-
Elu MOF77, 98, 131, 177(E)
DeWalt DW624, DW625EK, 629
CMT 1E
Trend DWS/BH/B7 Min. stone length=140 mm
Max. stone length=210.0 . Adjustable to clamp 6 inch to 8 inch bench stones securely, (will also accept most oil stones up to 8 inch).
Central rubber block provides extra support.
Trend DWS/HP/LS Size=175 mm x 95 mm
Suede side=Ideal for woodworking tools
Smooth side=Ideal for knives . Leather strop, and used with honing paste to polish sharpened cutting edges to give a highly polished, sharp cutting edge.
Trend DWS/KIT/A Grade=Ex-Fine & Coarse
Grit B7=1000 & 300 (nom. 15 & 50 micron)
Stone size=178 x 63.5 x 9.5 mm
Credit card size=85 x 50 x 1.6.0
Grit CC=600 & 300 (nom. 25 & 50 micron)
Lapping fluid size=100ml . A diamond whetstone kit comprising of:-
1. A precision hand made double sided credit card size diamond stone.
Fine 600 grit (25 micron) and coarse 300 grit (50 micron).
Ideal for fluted, shaped and small router bits Carbide or HSS Tur
Trend DWS/MF/FC Blade size=60 mm
Blade width=20/22 mm
Blade thickness=10.0 to 6.35 mm at nose
Overall length=178.0
Grade=Fine
Grit=600 (nom. 25 micron) & 300 (nom. 50 micron)
. Double sided 60mm machinist file.
Fine 600 grit (25 micron) & 300 grit (50 micron).
Guaranteed for five years when used with Trend Lapping Fluid.
Solid handle.
Overall length 178mm.
Suitable for woodturning gouge internal and external
Trend DWS/P3/FC Size=87 mm x 25 mm x 1.5 mm
Grade=Fine & Coarse
Grit=600 & 300 (nom. 25 & 50 micron) . Double-sided continuous diamond pocket stone.
Fine 600 grit (25 micron) and coarse 300 grit (50 micron).
Diamond sharpens up to 98% quicker than conventional methods.
Monocrystalline diamonds bonded by electroless process to a precis
Trend DWS/P5/FC Size=127 mm x 27 mm x 1.5 mm
Grade=Fine & Coarse
Grit=600 & 300 (nom. 25 & 50 micron) . A precision hand made double-sided 5 inch x 1 inch pocket size diamond stone.
Fine 600 grit (25 micron) and coarse 300 grit (50 micron).
Guaranteed for five years when used with Trend Lapping Fluid.
Ideal for interim circular saw blad
Trend DWS/PFR/F File length=93 mm x 6.0 diameter
Overall length=143 mm x 11.3 mm
Grade=Fine
Grit=600 (nom. 25 micron) . A precision tapered diamond retractable file.
Fine 600 grit (25 micron)
Guaranteed for five years when used with Trend Lapping Fluid.
Ideal for all shaped tooling. Profiles, turning and carving tools , and all knives (hunting/outdoor
Trend DWS/PP5/FC Size=127 mm x 27 mm x 1.5 mm
Grade=Fine & Coarse
Grit=600 & 300 grit (nom. 25 & 50 micron) . A precision double-sided 5 inch x 1 inch pocket size diamond stone.
Fine 600 grit (25 micron) and coarse 300 grit (50 micron).
Monycrystalline diamond for longer life.
Guaranteed for five years when used with Trend Lapping Fluid.
Idea
Trend DWS/PP5/FX Size=127 mm x 27 mm x 1.5 mm
Grade=Ex-Fine & Ex-Coarse
Grit=1000 & 180 grit (nom. 15 & 70 micron) . The FX Extreme precision double-sided 5 inch x 1 inch pocket size diamond stone.size diamond stone for bush-craft and hunting.
Ideal companion for the outdoor pursuit enthusiast to enable sharpening quickly every time.
Ex-fine 1000 gr
Trend ME/JIG Ellipse major axis =580 mm
Ellipse minor axis max=520 mm
Ellipse minor axis min=430 mm
Ellipse major axis =500 mm
Ellipse minor axis max=450 mm
Ellipse minor axis min=360 mm
Ellipse major axis =400 mm
Ell . The Mini Ellipse Jig is ideal for routing elliptical picture frames, mirrors, clocks and small coffee tables.
Working on the same principle as the Ellipse Jig, the Mini Ellipse Jig, produced from plastic will cut much smaller ellipses
Trend PCD/21X1/2 D=5/8 inch
D=15.9 mm
C=1 inch
C=25.4 mm
OL=68.0
Shank Diameter=1/2 inch . Polycrystalline Diamond tipped cutter gives a significant increase in tool life compared to TC tooling.
PCD also gives an accuracy of cut throughout the tool life and faster feed rates as well as reduced downtime.
Use in fixed head,
Trend Diamond T Slot slat wall cutter PCD/40X1/2 D=30 mm
C=7 mm
C2=15 mm
R=3 mm
A=119 degrees
Shank Diameter=1/2 inch .
Polycrystalline Diamond tipped cutter gives a significant increase in tool life compared to TC tooling.
PCD also gives an accuracy of cut throughout the tool life and faster feed rates as well as reduced downtime.
Use in fixed head,
Trend PSC/1X8MMTC D=41 mm
C=11 mm
C2=6.3 mm
B=22 mm
R=4 mm
Shank Diameter=8.0
Timber thickness min.=18.0
Timber thickness max.=22 mm . The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set.
The components are rearranged on the arbor to cut the profile or the scribe.
Trend PSC/2X1/2TC D=46.0
C=15 mm
C2=4 mm
B=22 mm
R=5.9 mm
Shank Diameter=1/2 inch
Timber thickness min.=21 mm
Timber thickness max.=26.5 mm
. The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set.
The components are rearranged on the arbor to cut the profile or the scribe.
Trend PSC/30X8MMTC D=41 mm
C=11 mm
C2=4 mm
B=22 mm
R=3.5 mm
Shank Diameter=8.0
Timber thickness min.=16.0
Timber thickness max.=18.0 . The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set.
The components are rearranged on the arbor to cut the profile or the scribe.
Trend PSC/3X1/2TC D=41 mm
C=11 mm
C2=6.3 mm
B=22 mm
R=3.5 mm
Shank Diameter=1/2 inch
Timber thickness min.=18.0
Timber thickness max.=22 mm . The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set.
The components are rearranged on the arbor to cut the profile or the scribe.
Trend PSC/3X8MMTC D=41 mm
C=11 mm
C2=6.3 mm
B=22 mm
R=3.5 mm
Shank Diameter=8.0
Timber thickness min.=18.0
Timber thickness max.=22 mm . The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set.
The components are rearranged on the arbor to cut the profile or the scribe.
Trend PSC/40X1/2TC D=46.0
C=15 mm
C2=6.3 mm
B=22 mm
R=4.7 mm
Shank Diameter=1/2 inch
Timber thickness min.=21 mm
Timber thickness max.=26.5 mm . The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set.
The components are rearranged on the arbor to cut the profile or the scribe.
Trend PSC/4X1/2TC D=46.0
C=15 mm
C2=4 mm
B=22 mm
R=4.7 mm
Shank Diameter=1/2 inch
Timber thickness min.=18.0
Timber thickness max.=22 mm
. The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set.
The components are rearranged on the arbor to cut the profile or the scribe.
Trend PSC/50X1/2TC D=41 mm
C=11 mm
C2=4 mm
B=22 mm
A=10 degrees
Shank Diameter=1/2 inch
Timber thickness min.=16.0
Timber thickness max.=18.0 . The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set.
The components are rearranged on the arbor to cut the profile or the scribe.
Trend PSC/5X1/2TC D=41 mm
C=11 mm
C2=6.3 mm
B=22 mm
A=10 degrees
Shank Diameter=1/2 inch
Timber thickness min.=18.0
Timber thickness max.=22 mm . The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set.
The components are rearranged on the arbor to cut the profile or the scribe.
Trend PSC/5X8MMTC D=41 mm
C=11 mm
C2=6.3 mm
B=22 mm
A=10 degrees
Shank Diameter=8.0
Timber thickness min.=18.0
Timber thickness max.=22 mm . The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set.
The components are rearranged on the arbor to cut the profile or the scribe.
Trend RS/B/5 Length=5m
Colour=Brown . High grade silicon rubber weatherseal. Will stand temperature of -30 degrees to +200 degrees C.
Recessed using a small 1/4" hand router.
Can be slid or tucked in from the top face.
Compresses to approx. 3.5mm. Groove depth should b
Trend RS/W/10 Length=10m
Colour=White . High grade silicon rubber weatherseal. Will stand temperature of -30 degrees to +200 degrees C.
Recessed using a small 1/4" hand router.
Can be slid or tucked in from the top face.
Compresses to approx. 3.5mm. Groove depth should b
Trend RT/07X1/2TC D=16.0
C=29.5 mm
OL=88.0
Shank Diameter=1/2 inch
. Solid Carbide replaceable blades.
Tool body remains in place when changing blades, thus reducing down-time.
Straight cutters have blades with two or four cutting edges, allowing them to be rotated and locked in identical positions
Trend RT/100X1/4TC D=12.7 mm
C=13 mm
OL=59 mm
B=12.7 mm
Shank Diameter=6.35 mm
Shank Length=31 mm
. Single blade.
Bearing allows groove to be routed to the template.
Template thickness should be 10.0mm thicker than cut length.
Trend RT/15X1/2TC D=7/8 inch
D=22.2 mm
C=29.5 mm
OL=76.0
Shank Diameter=1/2 inch
. Solid Carbide replaceable blades.
Tool body remains in place when changing blades, thus reducing down-time.
Straight cutters have blades with two or four cutting edges, allowing them to be rotated and locked in identical positions
Trend RT/16X1/2TC D=20 mm
C=29.5 mm
OL=88.0
Shank Diameter=1/2 inch
. Solid Carbide replaceable blades.
Tool body remains in place when changing blades, thus reducing down-time.
Straight cutters have blades with two or four cutting edges, allowing them to be rotated and locked in identical positions
Trend RT/23X1/2TC D=3/4 inch
D=19.1 mm
C=50 mm
OL=107 mm
Shank Diameter=1/2 inch . Refs RT/21 to RT/24 have blades that can be rotated 180 degrees to give double the life of a conventional tool.
Not recommended for plunge cutting unless ramped into workpiece.
Refs RT/21 & RT/23 are used for rough cutting only &
Trend RT/260X1/4TC D=25 mm
C=12.7 mm
OL=52.5 mm
Shank Diameter=1/4 inch
Shank Length=30 mm
. Two blades.
Replaceable tips are ideal for prolonged use on manmade materials.
Low profile bearing fixing screw.
Trend RT/323X1/2LTC D=22 mm
C=28.0
OL=80 mm
A=95 degrees
Shank Diameter=1/2 inch
Rotation=Left hand
. Solid Carbide replaceable blades.
Tool body remains in place when changing blades, thus reducing down-time.
1/2 inch shank tools are ideal for use in production applications.
Clear economical advantage over conventional brazed t
Trend RT/391X1/4TC D=28.6.0
C=13.25 mm
OL=58.5 mm
Shank Diameter=1/4 inch
Shank Length=30 mm
. Two blades.
Ideal for rebating straight and shaped workpieces.
Low profile bearing fixing screw.
Trend RT/65X1/4TC D=26.0
C=15.7 mm
OL=53 mm
Shank Diameter=1/4 inch
Shank Length=27 mm
. Two blades.
Replaceable tips allow dimensions to be constant.
Low profile bearing fixing screw.
Trend S31/11X1/4STC D1=6.0
Cut length=6.9 mm
Overall length=63 mm
A=98 degrees
Shank Diameter=1/4 inches
Shank Diameter=1/4
. For dovetail joints and sliding dovetails.
To suit user preference, the table shows angles from the horizontal and the profiles show angles from the vertical.
Trend S49/30X1/4STC D1=1/4 inches
D1=6.3 mm
Cut length=25 mm
Overall length=64 mm
Shank Diameter=1/4
. Solid carbide spiral roughing tool to rout composite materials including phenolics, carbon fibre, fibreglass and Trespa.
Unique grinding and multi-flute design.
Suitable for roughing cuts in hard and abrasive material. Roughing cuts a
Trend CLT/T10/95 d=3/8 inch d=9.5 mm . A precision multi-slit one piece collet. Does not include the collet nut. For Trend T10 and T11 routers.Lead Time: 11 Days£ Enquire£ Enquire
Trend CLT/T9/12 d=12.0 . The collet is a one-piece multi-slit design to provide maximum grip on to the surface of the cutter's shank. Does not include the collet nut. Suitable for the Trend T9, CMT 2E, Metabo OF1612, 0FE1815Lead Time: 11 Days£ Enquire£ Enquire
Trend CLT/T9/6 d=6.0 . The collet is a one-piece multi-slit design to provide maximum grip on to the surface of the cutter's shank. Does not include the collet nut. Suitable for the Trend T9, CMT 2E, Metabo OF1612, 0FE1815Lead Time: 11 Days£ Enquire£ Enquire
Trend CLT/T9/635 d=1/4 inch d=6.35 mm . The collet is a one-piece multi-slit design to provide maximum grip on to the surface of the cutter's shank. Does not include the collet nut. Suitable for the Trend T9, CMT 2E, Metabo OF1612, 0FE1815Lead Time: 11 Days£ Enquire£ Enquire
Trend COLL/38 ID=3/8 inch OD=15.8.0 Hex key=1/16 inch . Collar Packs are used for cutters with shank mounted bearings. Packs include one collar, grub screw and hex key.Lead Time: 11 Days£ Enquire£ Enquire
* This product has been postponed* The nearest alternative which we offer is the KWJ900. Trend COMBI1002 Length=1200 mm Width=376.0 Thickness=16.0 Female cut material width loss=23 mm Weight=9.6kg End cut=45 degrees Corner Mitre Joint=22.5 degrees Peninsula radius=approx. 410.0 Corner radius=approx. 75 mm Circul . For up to 1000mm wide worktop now with cable tidy insert & circular hinge cut apertures. A single male and female template in 16mm solid laminate. Facility to join boards from 450mm to 1000mm wide. Facility to cut 22.5 degree mitrLead Time: 11 Days£ Enquire£ Enquire
Trend DE6278 d=1/2 inch d=12.7 mm Elu MOF77, 98, 131, 177(E) DeWalt DW624, DW625EK, 629 . Replacement collet. Fits the following machines:- Elu MOF77, 98, 131, 177(E) DeWalt DW624, DW625EK, 629 CMT 1ELead Time: 11 Days£ Enquire£ Enquire
Trend DWS/BH/B7 Min. stone length=140 mm Max. stone length=210.0 . Adjustable to clamp 6 inch to 8 inch bench stones securely, (will also accept most oil stones up to 8 inch). Central rubber block provides extra support.Lead Time: 11 Days£ Enquire£ Enquire
Trend DWS/HP/LS Size=175 mm x 95 mm Suede side=Ideal for woodworking tools Smooth side=Ideal for knives . Leather strop, and used with honing paste to polish sharpened cutting edges to give a highly polished, sharp cutting edge.Lead Time: 11 Days£ Enquire£ Enquire
Trend DWS/KIT/A Grade=Ex-Fine & Coarse Grit B7=1000 & 300 (nom. 15 & 50 micron) Stone size=178 x 63.5 x 9.5 mm Credit card size=85 x 50 x 1.6.0 Grit CC=600 & 300 (nom. 25 & 50 micron) Lapping fluid size=100ml . A diamond whetstone kit comprising of:- 1. A precision hand made double sided credit card size diamond stone. Fine 600 grit (25 micron) and coarse 300 grit (50 micron). Ideal for fluted, shaped and small router bits Carbide or HSS TurLead Time: 11 Days£ Enquire£ Enquire
Trend DWS/MF/FC Blade size=60 mm Blade width=20/22 mm Blade thickness=10.0 to 6.35 mm at nose Overall length=178.0 Grade=Fine Grit=600 (nom. 25 micron) & 300 (nom. 50 micron) . Double sided 60mm machinist file. Fine 600 grit (25 micron) & 300 grit (50 micron). Guaranteed for five years when used with Trend Lapping Fluid. Solid handle. Overall length 178mm. Suitable for woodturning gouge internal and externalLead Time: 11 Days£ Enquire£ Enquire
Trend DWS/P3/FC Size=87 mm x 25 mm x 1.5 mm Grade=Fine & Coarse Grit=600 & 300 (nom. 25 & 50 micron) . Double-sided continuous diamond pocket stone. Fine 600 grit (25 micron) and coarse 300 grit (50 micron). Diamond sharpens up to 98% quicker than conventional methods. Monocrystalline diamonds bonded by electroless process to a precisLead Time: 11 Days£ Enquire£ Enquire
Trend DWS/P5/FC Size=127 mm x 27 mm x 1.5 mm Grade=Fine & Coarse Grit=600 & 300 (nom. 25 & 50 micron) . A precision hand made double-sided 5 inch x 1 inch pocket size diamond stone. Fine 600 grit (25 micron) and coarse 300 grit (50 micron). Guaranteed for five years when used with Trend Lapping Fluid. Ideal for interim circular saw bladLead Time: 11 Days£ Enquire£ Enquire
Trend DWS/PFR/F File length=93 mm x 6.0 diameter Overall length=143 mm x 11.3 mm Grade=Fine Grit=600 (nom. 25 micron) . A precision tapered diamond retractable file. Fine 600 grit (25 micron) Guaranteed for five years when used with Trend Lapping Fluid. Ideal for all shaped tooling. Profiles, turning and carving tools , and all knives (hunting/outdoorLead Time: 11 Days£ Enquire£ Enquire
Trend DWS/PP5/FC Size=127 mm x 27 mm x 1.5 mm Grade=Fine & Coarse Grit=600 & 300 grit (nom. 25 & 50 micron) . A precision double-sided 5 inch x 1 inch pocket size diamond stone. Fine 600 grit (25 micron) and coarse 300 grit (50 micron). Monycrystalline diamond for longer life. Guaranteed for five years when used with Trend Lapping Fluid. IdeaLead Time: 11 Days£ Enquire£ Enquire
Trend DWS/PP5/FX Size=127 mm x 27 mm x 1.5 mm Grade=Ex-Fine & Ex-Coarse Grit=1000 & 180 grit (nom. 15 & 70 micron) . The FX Extreme precision double-sided 5 inch x 1 inch pocket size diamond stone.size diamond stone for bush-craft and hunting. Ideal companion for the outdoor pursuit enthusiast to enable sharpening quickly every time. Ex-fine 1000 grLead Time: 11 Days£ Enquire£ Enquire
Trend ME/JIG Ellipse major axis =580 mm Ellipse minor axis max=520 mm Ellipse minor axis min=430 mm Ellipse major axis =500 mm Ellipse minor axis max=450 mm Ellipse minor axis min=360 mm Ellipse major axis =400 mm Ell . The Mini Ellipse Jig is ideal for routing elliptical picture frames, mirrors, clocks and small coffee tables. Working on the same principle as the Ellipse Jig, the Mini Ellipse Jig, produced from plastic will cut much smaller ellipsesLead Time: 11 Days£ Enquire£ Enquire
Trend PCD/21X1/2 D=5/8 inch D=15.9 mm C=1 inch C=25.4 mm OL=68.0 Shank Diameter=1/2 inch . Polycrystalline Diamond tipped cutter gives a significant increase in tool life compared to TC tooling. PCD also gives an accuracy of cut throughout the tool life and faster feed rates as well as reduced downtime. Use in fixed head,Lead Time: 11 Days£ Enquire£ Enquire
Trend Diamond T Slot slat wall cutter PCD/40X1/2 D=30 mm C=7 mm C2=15 mm R=3 mm A=119 degrees Shank Diameter=1/2 inch . Polycrystalline Diamond tipped cutter gives a significant increase in tool life compared to TC tooling. PCD also gives an accuracy of cut throughout the tool life and faster feed rates as well as reduced downtime. Use in fixed head,Lead Time: 11 Days£ Enquire£ Enquire
Trend PSC/1X8MMTC D=41 mm C=11 mm C2=6.3 mm B=22 mm R=4 mm Shank Diameter=8.0 Timber thickness min.=18.0 Timber thickness max.=22 mm . The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set. The components are rearranged on the arbor to cut the profile or the scribe.Lead Time: 11 Days£ Enquire£ Enquire
Trend PSC/2X1/2TC D=46.0 C=15 mm C2=4 mm B=22 mm R=5.9 mm Shank Diameter=1/2 inch Timber thickness min.=21 mm Timber thickness max.=26.5 mm . The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set. The components are rearranged on the arbor to cut the profile or the scribe.Lead Time: 11 Days£ Enquire£ Enquire
Trend PSC/30X8MMTC D=41 mm C=11 mm C2=4 mm B=22 mm R=3.5 mm Shank Diameter=8.0 Timber thickness min.=16.0 Timber thickness max.=18.0 . The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set. The components are rearranged on the arbor to cut the profile or the scribe.Lead Time: 11 Days£ Enquire£ Enquire
Trend PSC/3X1/2TC D=41 mm C=11 mm C2=6.3 mm B=22 mm R=3.5 mm Shank Diameter=1/2 inch Timber thickness min.=18.0 Timber thickness max.=22 mm . The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set. The components are rearranged on the arbor to cut the profile or the scribe.Lead Time: 11 Days£ Enquire£ Enquire
Trend PSC/3X8MMTC D=41 mm C=11 mm C2=6.3 mm B=22 mm R=3.5 mm Shank Diameter=8.0 Timber thickness min.=18.0 Timber thickness max.=22 mm . The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set. The components are rearranged on the arbor to cut the profile or the scribe.Lead Time: 11 Days£ Enquire£ Enquire
Trend PSC/40X1/2TC D=46.0 C=15 mm C2=6.3 mm B=22 mm R=4.7 mm Shank Diameter=1/2 inch Timber thickness min.=21 mm Timber thickness max.=26.5 mm . The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set. The components are rearranged on the arbor to cut the profile or the scribe.Lead Time: 11 Days£ Enquire£ Enquire
Trend PSC/4X1/2TC D=46.0 C=15 mm C2=4 mm B=22 mm R=4.7 mm Shank Diameter=1/2 inch Timber thickness min.=18.0 Timber thickness max.=22 mm . The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set. The components are rearranged on the arbor to cut the profile or the scribe.Lead Time: 11 Days£ Enquire£ Enquire
Trend PSC/50X1/2TC D=41 mm C=11 mm C2=4 mm B=22 mm A=10 degrees Shank Diameter=1/2 inch Timber thickness min.=16.0 Timber thickness max.=18.0 . The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set. The components are rearranged on the arbor to cut the profile or the scribe.Lead Time: 11 Days£ Enquire£ Enquire
Trend PSC/5X1/2TC D=41 mm C=11 mm C2=6.3 mm B=22 mm A=10 degrees Shank Diameter=1/2 inch Timber thickness min.=18.0 Timber thickness max.=22 mm . The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set. The components are rearranged on the arbor to cut the profile or the scribe.Lead Time: 11 Days£ Enquire£ Enquire
Trend PSC/5X8MMTC D=41 mm C=11 mm C2=6.3 mm B=22 mm A=10 degrees Shank Diameter=8.0 Timber thickness min.=18.0 Timber thickness max.=22 mm . The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set. The components are rearranged on the arbor to cut the profile or the scribe.Lead Time: 11 Days£ Enquire£ Enquire
Trend RB/K Length=12.0 mm Width=12.0 mm Thickness=1.5 mm Holes=1 . Replacement Solid Carbide blades.Lead Time: 11 Days£ Enquire£ Enquire
Trend RB/M Length=12.0 mm Width=9.0 mm Thickness=1.5 mm . Replacement Solid Carbide blades.Lead Time: 11 Days£ Enquire£ Enquire
Trend RB/O Length=15.7 mm Width=9.0 mm Thickness=1.5 mm . Replacement Solid Carbide blades.Lead Time: 11 Days£ Enquire£ Enquire
Trend RB/Q Length=13.5 mm Width=9.0 mm Thickness=1.5 mm . Replacement Solid Carbide blades.Lead Time: 11 Days£ Enquire£ Enquire
Trend RS/B/5 Length=5m Colour=Brown . High grade silicon rubber weatherseal. Will stand temperature of -30 degrees to +200 degrees C. Recessed using a small 1/4" hand router. Can be slid or tucked in from the top face. Compresses to approx. 3.5mm. Groove depth should bLead Time: 11 Days£ Enquire£ Enquire
Trend RS/W/10 Length=10m Colour=White . High grade silicon rubber weatherseal. Will stand temperature of -30 degrees to +200 degrees C. Recessed using a small 1/4" hand router. Can be slid or tucked in from the top face. Compresses to approx. 3.5mm. Groove depth should bLead Time: 11 Days£ Enquire£ Enquire
Trend RT/07X1/2TC D=16.0 C=29.5 mm OL=88.0 Shank Diameter=1/2 inch . Solid Carbide replaceable blades. Tool body remains in place when changing blades, thus reducing down-time. Straight cutters have blades with two or four cutting edges, allowing them to be rotated and locked in identical positionsLead Time: 11 Days£ Enquire£ Enquire
Trend RT/100X1/4TC D=12.7 mm C=13 mm OL=59 mm B=12.7 mm Shank Diameter=6.35 mm Shank Length=31 mm . Single blade. Bearing allows groove to be routed to the template. Template thickness should be 10.0mm thicker than cut length.Lead Time: 11 Days£ Enquire£ Enquire
Trend RT/15X1/2TC D=7/8 inch D=22.2 mm C=29.5 mm OL=76.0 Shank Diameter=1/2 inch . Solid Carbide replaceable blades. Tool body remains in place when changing blades, thus reducing down-time. Straight cutters have blades with two or four cutting edges, allowing them to be rotated and locked in identical positionsLead Time: 11 Days£ Enquire£ Enquire
Trend RT/16X1/2TC D=20 mm C=29.5 mm OL=88.0 Shank Diameter=1/2 inch . Solid Carbide replaceable blades. Tool body remains in place when changing blades, thus reducing down-time. Straight cutters have blades with two or four cutting edges, allowing them to be rotated and locked in identical positionsLead Time: 11 Days£ Enquire£ Enquire
Trend RT/23X1/2TC D=3/4 inch D=19.1 mm C=50 mm OL=107 mm Shank Diameter=1/2 inch . Refs RT/21 to RT/24 have blades that can be rotated 180 degrees to give double the life of a conventional tool. Not recommended for plunge cutting unless ramped into workpiece. Refs RT/21 & RT/23 are used for rough cutting only &Lead Time: 11 Days£ Enquire£ Enquire
Trend RT/260X1/4TC D=25 mm C=12.7 mm OL=52.5 mm Shank Diameter=1/4 inch Shank Length=30 mm . Two blades. Replaceable tips are ideal for prolonged use on manmade materials. Low profile bearing fixing screw.Lead Time: 11 Days£ Enquire£ Enquire
Trend RT/323X1/2LTC D=22 mm C=28.0 OL=80 mm A=95 degrees Shank Diameter=1/2 inch Rotation=Left hand . Solid Carbide replaceable blades. Tool body remains in place when changing blades, thus reducing down-time. 1/2 inch shank tools are ideal for use in production applications. Clear economical advantage over conventional brazed tLead Time: 11 Days£ Enquire£ Enquire
Trend RT/391X1/4TC D=28.6.0 C=13.25 mm OL=58.5 mm Shank Diameter=1/4 inch Shank Length=30 mm . Two blades. Ideal for rebating straight and shaped workpieces. Low profile bearing fixing screw.Lead Time: 11 Days£ Enquire£ Enquire
Trend RT/65X1/4TC D=26.0 C=15.7 mm OL=53 mm Shank Diameter=1/4 inch Shank Length=27 mm . Two blades. Replaceable tips allow dimensions to be constant. Low profile bearing fixing screw.Lead Time: 11 Days£ Enquire£ Enquire
Trend S31/11X1/4STC D1=6.0 Cut length=6.9 mm Overall length=63 mm A=98 degrees Shank Diameter=1/4 inches Shank Diameter=1/4 . For dovetail joints and sliding dovetails. To suit user preference, the table shows angles from the horizontal and the profiles show angles from the vertical.Lead Time: 11 Days£ Enquire£ Enquire
Trend S49/30X1/4STC D1=1/4 inches D1=6.3 mm Cut length=25 mm Overall length=64 mm Shank Diameter=1/4 . Solid carbide spiral roughing tool to rout composite materials including phenolics, carbon fibre, fibreglass and Trespa. Unique grinding and multi-flute design. Suitable for roughing cuts in hard and abrasive material. Roughing cuts aLead Time: 11 Days£ Enquire£ Enquire