Startrite TS1 Sliding Table Saw 220v 1ph

The Startrite TS1 introduces new standards of quality for a heavy duty table saw designed for the busy professional workshop. With its large capacities and robust construction, it is built to give years of reliable and accurate service. The machine is supplied complete with a large squaring frame which is attached to an industrial quality sliding beam and held from beneath by a substantial support arm. With a 1200 mm stroke, the TS1 is ideal for cross cutting 4' sheets.
In addition to the 315 mm diameter main blade, the machine also features a scoring blade with its own motor, allowing it to be operated independently of the main blade. The fence, which features an accurate micro-adjustment mechanism, is mounted to a solid steel bar with a large cast iron bracket. This design gives smooth, easy movement whilst also allowing solid locking down of the fence. At its farthest position the fence gives support for up to a 900 mm rip cut across the finely ground cast iron table. In addition, the height and angle of both the main blade and scoring blade are controlled independently using separate mechanisms to ensure accurate and secure positioning, essential for successful performance.

Industrial Sliding Carriage
The heavy duty sliding beam gives solid support and smooth movement.

Scoring Blade
Powered by a separate motor for maximum power and reliability.

Industrial Fence Mount
The solid fence is mounted on a thick steel bar and large cast iron bracket with micro-adjustment.

Sliding carriage YES
Blade Tilt up to 45º YES
Scoring Blade YES
Cast Iron Table YES
Cast Iron Fence Mount YES
Cam Lock Fence YES
Fence Micro-Adjustment YES
Cast Iron Saw Unit YES
Startrite logo

Regular Price: $3,305

Now Only $3,103

> Part Number: STTS1_1
The approximate lead time for this product is 30 days.
Product Description
  • Voltage : 240 volts
  • Amperage : 16 amps
  • Maximum Blade Size : 315 mm
  • Blade Bore : 30 mm
  • Scoring Blade Size : 120 mm
  • Scoring Blade Bore : 30 mm
  • Blade Speed : 4000 rpm
  • Maximum Rip Capacity : 900 mm
  • Sliding Carriage Stroke : 1250 mm
  • Blade Tilt : 45 deg.
  • Maximum Depth of Cut 90º : 102 mm
  • Maximum Depth of Cut 45º : 72 mm
  • Table Height from Floor : 870 mm
  • Motor : 2.5 kW
  • Weight : 400 kg
  • Size : H860xW2030xD1730mm
  • Packing size of the TS1: Length 1300mm
  • Width 1000mm
  • Height 1110mm
  • Weight 436kg
  • scoring blade:
  • CM28812024H1 120 x 20 bore conical
Additional Information
Additional Information
Part Number STTS1_1
Manufacturer Startrite
Customer Reviews (1)
Good value
Setting up the saw takes some time because the instructions are not very good. Using common sense overcomes most issues except positioning the panel attachment on the side of the sliding table. Trial and error will show that positioning it too far forward or to the rear will restrict the table travel and make use of the angle fence difficult. For accuracy it is necessary to pay special care to setting up both fence positions and not take the factory setting as correct. It pays to recheck fence setting weekly. For the price this is a decent bit of kit. Review by Chris (Posted on 06/11/2016)

Write Your Own Review

You're reviewing: Startrite TS1 Sliding Table Saw 220v 1ph

You may also be interested in the following product(s)