Timber Drying Kiln 100cbm Model JET


The supporting structure is completely made of special alloy
aluminum extruded profiles, which are highly resistance to corrosion.
Some other components are in stainless-steel. All columns, front
beams, roof holding structure, fan holding beams, bottom beams,
windbracing are of corrosion resistant aluminum meeting the
international standards and allow easy-assembly of the
components. The fans are built into aluminum beams which are
constructed with our special aluminum profiles, including
intermediate aluminum enclosures to avoid short-circuiting of the air. The aluminum profiles are made to our own exclusive patented
design. Used aluminium alloy: Al Mg 0,5 Si 0,4 Fe nach UNI 6060

The thermal insulation is by means of aluminum and high density glass-wool, with 100 mm thickness. In order to achieve the max. insulation and energy saving. The mineral fiber is bonded to the aluminum walls and perfectly supported by a special aluminum frame, which makes the panels self bearing and modular, allowing an easy and quick assembly. The panels are fastened by means of rugged aluminum clips.

Reversible air circulation produced by high efficiency aluminum
axial fans equipped with wing-shaped blades, reversible type.
The fans can perform the same efficiency and capacity in both
rotating directions (left and right) and at any revolution rate. The fan blades shape is perfectly symmetrical. They guarantee the best
quality dried timber with the lowest energy consumption. The blades
are made by die casting in a special aluminum and silica alloy, that
guarantees the highest resistance at the most critical environment
conditions. The electrical motor is tropically insulated to resist high temperatures, IP 55 protection level, class H to work free of
problems in environments reaching 100 % relative moisture, and is
equipped with proper bearings and cables to resist high temperatures.

All heating coils are in stainless-steel with aluminum fins.
They guarantee a high thermal exchange and guarantee a very good
corrosion resistance for years of use. The delivery includes the heating fluid control valve.

Software & Control:
Automatic control system with industry PC and 5" touch screen.
The touch screen allows a direct control thanks to a graphic software
which is user friendly and highly intuitive, able to offer the
following advantages:
- real time prompt visualisation of the data, of the real and set
values and of their curves.
- real time selection among all parameters and programs
- quick and from the display guided program installation
- language selection directly from display

The drying cycle can be divided into 20 phases: all freely programmable. For any phase, the following parameters can be shown: air speed, water temperature, hot water volume, electric power used, inverter functioning according to the climatic conditions within the cell.
In order to fulfil the technical expectations in the timber
drying industry, the operator can use 100 prerecorded drying program,
which can be directly recalled through some specific codes
corresponding to the wood type; or they can be recalled through the
botanic and scientific name or through the name in its original
language. These programs can be modified, adapted or recorded with
personal programming code, according to the specific needs of the user.
  • approximate lead time: 3 days
  • Part Number: KILN868641
£ Enquire
Lease from only
£244.41 per week

Leasing plans are for
UK businesses only
and subject to status

Product Description
  • Internal dimensions: Width (B): 8.600 mm.
  • Depth (T): 8.600 mm.
  • Height (H): 4.100 mm.
  • Main door dimensions: Width: 8.600 mm.
  • Height: 4.100 mm.
  • heating power installed at 15°C inside temperature: 400.000 Kcal/h
  • Heating power installed at 60°C inside temperature: 180.000 Kcal/h
  • Heating system: Coils
  • Number of fans ( 900 mm.): 4 nr.
  • Motor power = (each fan) C/W VARIABLE SPEED DRIVE 4 kW
  • Nominal fan capacity = (each fan): 33.800 m?/h
  • Air speed (based on a.m. pack stack size): 2,20 2,60 m/s
  • Spraying fluid: Cold water at 3 bar
  • Vents (750 x 320 mm.) (in the front and rear panels) 3 pairs
  • Loading system (not included in the supply) Forklift
  • Heating System extra : TBA
  • Erection and start up of the plant: INCLUDED
  • Plans for the erection and the electrical plant are included
  • Travel expenses AT CUSTOMER S CHARGE
  • Board and Lodging AT CUSTOMER S CHARGE
  • Groundworks AT CUSTOMER S CHARGE
  • The Buyer will provide one plumber and one electrician, skilled ones, and 1 team of at least 4 workers.
Additional Information
Additional Information
Part Number KILN868641
Manufacturer N/A

Write Your Own Review

You're reviewing: Timber Drying Kiln 100cbm Model JET

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Your Rating