Countersinks
(55 Products)-
available in 2 sizes 5-10mm or 11-12mm - these shell countersinks are designed for assembly on the shank of the drill. For use with the following parts: 310-311-362-313-314-366 HW Technical details: - Super-strength steel. - 2 precision ground carbide tipped cutting edges [Z2]. - Direct clamp on the shank of the drills. Application: used for chamfering and drilling in solid wood, wood composites, plastic and laminated materialsIn Stock£9.00As low as £10.80
-
CMT 316 loose TCT countersinks are used for countersinking, chamfering and drilling in solid wood, wood composites, plastic and laminated materials. For assembly on the spiral head of the bit. Adjustable depth. For use with the following parts: 306-307-308-309-373-374-375-338-339 340-341-342-343-344-346-352-353 TCT Technical details: - Super-strength steel. - 2 precision ground carbide tipped cutting edges [Z2]. - Direct clamp on the shank of the drills.In Stock£9.00As low as £10.80
-
CMT part no:515.412.11A DRILL BITS WITH 90 degrees COUNTERSINK SET 515A TECHNICAL DETAILS: Super strength steel. Countersink: 2 HW precision ground cutting edges [Z2]. Stop collars with precision clamping nut for quick and easy assembly. The Delrin? protection sleeve lets you work without leaving marks on the workpiece.In StockList £70.80£45.00Inc Vat £54.00
-
CMT part no:515.414.11A DRILL BITS WITH 90 degrees COUNTERSINK SET 515A TECHNICAL DETAILS: Super strength steel. Countersink: 2 HW precision ground cutting edges [Z2]. Stop collars with precision clamping nut for quick and easy assembly. The Delrin? protection sleeve lets you work without leaving marks on the workpiece.Lead Time: 18 DaysList £70.80£45.00Inc Vat £54.00
-
CMT part no:515.515.11A DRILL BITS WITH 90 degrees COUNTERSINK SET 515A TECHNICAL DETAILS: Super strength steel. Countersink: 2 HW precision ground cutting edges [Z2]. Stop collars with precision clamping nut for quick and easy assembly. The Delrin? protection sleeve lets you work without leaving marks on the workpiece.Lead Time: 18 DaysList £70.80£45.00Inc Vat £54.00
-
CMT part no:515.614.11A DRILL BITS WITH 90 degrees COUNTERSINK SET 515A TECHNICAL DETAILS: Super strength steel. Countersink: 2 HW precision ground cutting edges [Z2]. Stop collars with precision clamping nut for quick and easy assembly. The Delrin? protection sleeve lets you work without leaving marks on the workpiece.Lead Time: 18 DaysList £70.80£45.00Inc Vat £54.00
-
CMT part no:515.615.11A DRILL BITS WITH 90 degrees COUNTERSINK SET TECHNICAL DETAILS: Super strength steel. Countersink: 2 HW precision ground cutting edges [Z2]. Stop collars with precision clamping nut for quick and easy assembly. The Delrin? protection sleeve lets you work without leaving marks on the workpiece.Lead Time: 18 DaysList £70.80£45.00Inc Vat £54.00
-
CMT part no:913.101.11 Any large panel or table top should be secured in a way that allows it to expand or contract without splitting. These screw-slot bits let you create screw slots so that panels can be held in place but are able to slide back and forth without splitting the wood or breaking the screw securing them.In Stock
-
CMT part no:913.201.11 Both have 8mm or 12,7mm shanks and the codes 913.201.11 and 813.701.11 are for countersink screws, while the codes 913.101.11 and 813.601.11 are for counterbored screws. Any large panel or table top should be secured in a way that allows it to expand or contract without splitting. These screw-slot bits let you create screw slots so that panels can be held in place but are able to slide back and forth without splitting the wood or breaking the screw securing them.Lead Time: 18 Days
-
CMT part no:521.002.21 Countersink Hwm Z3 S=10 D=19.5x9x70 Rh 90 degrees SOLID CARBIDE COUNTERSINK WITH PARALLEL SHANK 521.002 TECHNICAL DETAILS: -Super strength steel. -3 HWM precision ground cutting edges (Z3). - Parallel shank with driving flat and length adjusting screw.In StockList £73.20£29.00Inc Vat £34.80
-
Trend 620/6WS D=16.0 D2=6.0 OL=25 mm . These countersinks, produced from the best grade carbon steel, leaves a clean cut finish by virtue of their multi-tooth deep ground gullets. Fits metric drills from 3mm to 12mm inclusive. Not suitable for abrasive materials or metal.Lead Time: 9 Days£17.00£20.40As low as £18.36
-
Trend 620/8WS D=20 mm D2=8.0 OL=25 mm . These countersinks, produced from the best grade carbon steel, leaves a clean cut finish by virtue of their multi-tooth deep ground gullets. Fits metric drills from 3mm to 12mm inclusive. Not suitable for abrasive materials or metal.Lead Time: 9 Days£19.00£22.80As low as £20.52
-
Trend 6200/10HSS D=15.9 mm D2=5.55 mm Shank Dia.=Drill Chuck . They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. Use at drilling speeds only. Not suitable for ferrous orLead Time: 9 Days£23.00£27.60As low as £24.84
-
Trend 6200/10TC D=15.9 mm D2=5.55 mm Shank Dia.=Drill Chuck . They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used for plywood, particle boards andLead Time: 9 Days£35.00£42.00As low as £37.80