Countersinks
(55 Products)
-
Trend 6200/12TC D=15.9 mm D2=6.35 mm Shank Dia.=Drill Chuck . They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used for plywood, particle boards andLead Time: 9 Days£35.00£42.00As low as £37.80 -
Trend 6200/4HSS D=12.7 mm D2=3.2 mm Shank Dia.=Drill Chuck . They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. Use at drilling speeds only. Not suitable for ferrous oLead Time: 9 Days£21.00£25.20As low as £22.68 -
Trend 6200/4TC D=12.7 mm D2=3.2 mm Shank Dia.=Drill Chuck . They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used for plywood, particle boards andLead Time: 9 Days£35.00£42.00As low as £37.80 -
Trend 6200/6HSS D=12.7 mm D2=3.96.0 Shank Dia.=Drill Chuck . They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. Use at drilling speeds only. Not suitable for ferrous oLead Time: 9 Days£21.00£25.20As low as £22.68 -
Trend 6200/6TC D=12.7 mm D2=3.96.0 Shank Dia.=Drill Chuck . They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used for plywood, particle boards andLead Time: 9 Days£31.00£37.20As low as £33.48 -
Trend 6200/8HSS D=15.9 mm D2=4.76.0 Shank Dia.=Drill Chuck . They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. Use at drilling speeds only. Not suitable for ferrous oLead Time: 9 Days£21.00£25.20As low as £22.68 -
Trend 6200/8TC D=15.9 mm D2=4.76.0 Shank Dia.=Drill Chuck . They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used for plywood, particle boards andLead Time: 9 Days£34.00£40.80As low as £36.72