Drop in for a coffee and look round our showroom just south of London. If you need to contact us: send us an email >>

Acrylic & Composite Cutters

(82 Products)

CNC Router Tools & Cutters

Composite router cutters are cutting tools used for shaping and cutting composite materials, such as fiberglass, carbon fiber, and other composite materials. These materials are commonly used in industries such as aerospace, automotive, and marine.

The main types of composite router cutters are:

- Straight Flute Router Cutters: These cutters have a straight edge and are used for cutting straight lines and edges on composite materials.

- Compression Router Cutters: These cutters have a dual-flute design that compresses the material as it cuts. They are used for cutting both top and bottom edges of composite materials to create a clean and smooth finish.

- Spiral Router Cutters: These cutters have a spiral-shaped flute and are used for cutting a wide range of composite materials, including those with intricate designs and curves.

- Diamond Router Cutters: These cutters have a diamond coating on the tip, which makes them very durable and able to cut through hard materials such as carbon fiber.

- Ball End Router Cutters: These cutters have a rounded tip and are used for cutting curved and rounded shapes on composite materials.

When working with composite materials, it is important to use the appropriate router cutter and to use them safely and correctly. Always follow the manufacturer's instructions and wear appropriate safety gear, such as eye protection and a respirator, to avoid inhaling any dust or particles created during the cutting process.

CNC Router Tool Finder

Upcut Spiral Router Bits
Down Cut Spiral Router Bits for CNC Machines
Compression Spiral Router Bits for CNC machine
Reversible Blade Router Bits
PCD Router Cutters
Carving and engraving router bits for CNC Routers
V Groove and Engraving Router bits
Tool Holders for CNC Machining Centres
View as Grid List

Items 1-48 of 82

Page
per page
Filter By
Set Descending Direction
  1. Alucobond V-grooving Bit 135o  S-6.35  D-18x3.3
    CMT part no:815.002.11 Hw V-grooving Bi for Aluminium Composite Material (ACM) panels can be shaped using a very simple processing method. This technique referred to as the 'routing and folding' method, means ACM paneling can be manipulated in a variety of shapes and sizes. - a V-shaped groove is routed on the reverse side of the panel using a V-groove router bit thus leaving a thin layer of the core material at the base of the groove - i.e. on the inside of the outer cover sheet; - the untouched outer cover sheet can now be bent manually, giving an exact, clean folding line along the routed groove. The shape and depth of the groove will determine the outer radius of the folded edge. We recommend all routing to be done on either a CNC machine, a portable sheet milling machine or a hand router. The 'routing and folding' method can be used on any ACM product such as Alucobond?, Dibond? or any other product alike. The advantages of this unique technique are: - Low investment cost - Simple fabrication technique - Folding can be done on site, saving transportation costs - Low-cost fabrication of shaped components, wall cladding, roof edgings, column cladding, flashings, etc. - Flexibility in creating shapes - Very cost effective - Shapes are not limited by machine capacity.
    In Stock
    List £51.60
    £33.00
    Inc Vat £39.60
    As low as £34.85
  2. Alucobond V-grooving Bit 90o  S-6.35 D-18x7.4x6
    CMT part no:815.001.11 Hw V-grooving Bi for Aluminium Composite Material (ACM) panels can be shaped using a very simple processing method. This technique referred to as the 'routing and folding' method, means ACM paneling can be manipulated in a variety of shapes and sizes. - a V-shaped groove is routed on the reverse side of the panel using a V-groove router bit thus leaving a thin layer of the core material at the base of the groove - i.e. on the inside of the outer cover sheet; - the untouched outer cover sheet can now be bent manually, giving an exact, clean folding line along the routed groove. The shape and depth of the groove will determine the outer radius of the folded edge. We recommend all routing to be done on either a CNC machine, a portable sheet milling machine or a hand router. The 'routing and folding' method can be used on any ACM product such as Alucobond?, Dibond? or any other product alike. The advantages of this unique technique are: - Low investment cost - Simple fabrication technique - Folding can be done on site, saving transportation costs - Low-cost fabrication of shaped components, wall cladding, roof edgings, column cladding, flashings, etc. - Flexibility in creating shapes - Very cost effective - Shapes are not limited by machine capacity.
    In Stock
    List £48.00
    £30.00
    Inc Vat £36.00
    As low as £31.68
  3. CMT 198 Downcut SMG Spiral Bit Z1  D-6 I-27 L-60
    CMT part no: 198.660.11 Upcut Spiral Bit Z1 Neg. Hwm D=6x27x60 Dx SOLID CARBIDE DOWNCUT SPIRAL BITS 198.660.11 SHARP TECHNOLOGY WITH A NEW TWIST A special super-micrograin carbide formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tools run cooler and the edges last longer. INCREASED FEED RATE AND IMPROVED CUTTING QUALITY FOR ENHANCED PRODUCTIVITY WITH CMT! TECHNICAL FEATURES: -Premium quality HWM. -1 spiral cutting edge (Z1). -Provide an excellent finish on the lower side of the workpiece. -DOWNWARD CHIP EJECTION. Application Used for cutting, copying, panel sizing and any routing applications on solid wood, wood composites, plastic materials and laminates. Use a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors.
    In Stock
    List £48.00
    £18.00
    Inc Vat £21.60
    As low as £19.01
  4. CMT 915 V-Grooving ACM Bit DEG 135 S-8    D-18X3.3
    CMT part no:915.002.11 ALUCOBOND? plus composite panels can be shaped using a very simple processing method. The technique, called the routing and folding method, enables a fabricator to produce shapes of various kinds and sizes. A V-shaped groove is routed on the reverse side of the ALUCOBOND? plus composite panel using a "V" groove router bit. A thin layer of the core material should be left at the base of the groove, i.e. on the inside of the outer cover sheet. The untouched outer cover sheet can now be bent manually, giving an exact and clean folding line which follows the routed groove. The outer radius of the folded edge depends on the shape of the groove and its depth. We recommend that the routing be done using a CNC machining centre, a portable sheet milling machine or a hand router. The routing and folding method can be used for ALUCOBOND? plus composite panels with all available standard surface finishes. The advantages of this unique technique are: - Low investment cost - Simple fabrication technique - Folding can be done on site, saving transportation cost - Low-cost fabrication of shaped components, wall cladding, roof edgings, column cladding, flashings, etc. - Flexibility in creating shapes - Very economical - Shapes are not limited by machine capacity.
    In Stock
    List £51.60
    £19.00
    Inc Vat £22.80
    As low as £20.06
  5. CMT 915 V-Grooving Bit DEG 90 S-8 D-18X7.4X60   R
    CMT part no:915.001.11 ALUCOBOND? plus composite panels can be shaped using a very simple processing method. The technique, called the routing and folding method, enables a fabricator to produce shapes of various kinds and sizes. A V-shaped groove is routed on the reverse side of the ALUCOBOND? plus composite panel using a "V" groove router bit. A thin layer of the core material should be left at the base of the groove, i.e. on the inside of the outer cover sheet. The untouched outer cover sheet can now be bent manually, giving an exact and clean folding line which follows the routed groove. The outer radius of the folded edge depends on the shape of the groove and its depth. We recommend that the routing be done using a CNC machining centre, a portable sheet milling machine or a hand router. The routing and folding method can be used for ALUCOBOND? plus composite panels with all available standard surface finishes. The advantages of this unique technique are: - Low investment cost - Simple fabrication technique - Folding can be done on site, saving transportation cost - Low-cost fabrication of shaped components, wall cladding, roof edgings, column cladding, flashings, etc. - Flexibility in creating shapes - Very economical - Shapes are not limited by machine capacity.
    In Stock
    List £48.00
    £30.00
    Inc Vat £36.00
    As low as £31.68
  6. CMT Carbide Router bit for Aluminium and PVC D10 I22 L72 S
    CMT part no:186.100.11 CMT Aluminium PVC Router Bit D6 I15 L60 S6 Solid Carbide Upcut Spiral Bits, tailor-made for aluminum and PVC. Crafted from premium quality HWM and featuring 2 spiral cutting edges (Z2), these bits deliver an extra-fine finish with efficient upward chip ejection. Ideal for tasks such as ripping, template routing, and panel sizing on plastic materials and aluminum, even at high feed speeds. These versatile bits are compatible with machining centers, point-to-point machines, CNC routers, and hand-held routers equipped with chucks or adapters. Elevate your material processing with these high-performance tools.
    Lead Time: 18 Days
    List £87.60
    £35.00
    Inc Vat £42.00
    As low as £36.96
  7. CMT Carbide Router bit for Aluminium and PVC D12 I25 L83 S12
    CMT part no:186.120.11 CMT Aluminium PVC Router Bit D6 I15 L60 S6 Solid Carbide Upcut Spiral Bits, tailor-made for aluminum and PVC. Crafted from premium quality HWM and featuring 2 spiral cutting edges (Z2), these bits deliver an extra-fine finish with efficient upward chip ejection. Ideal for tasks such as ripping, template routing, and panel sizing on plastic materials and aluminum, even at high feed speeds. These versatile bits are compatible with machining centers, point-to-point machines, CNC routers, and hand-held routers equipped with chucks or adapters. Elevate your material processing with these high-performance tools.
    Lead Time: 18 Days
    List £109.20
    £43.00
    Inc Vat £51.60
    As low as £45.41
  8. CMT Carbide Router bit for Aluminium and PVC D14 I25 L82 S14
    CMT part no:186.140.11 CMT Aluminium PVC Router Bit D6 I15 L60 S6 Solid Carbide Upcut Spiral Bits, tailor-made for aluminum and PVC. Crafted from premium quality HWM and featuring 2 spiral cutting edges (Z2), these bits deliver an extra-fine finish with efficient upward chip ejection. Ideal for tasks such as ripping, template routing, and panel sizing on plastic materials and aluminum, even at high feed speeds. These versatile bits are compatible with machining centers, point-to-point machines, CNC routers, and hand-held routers equipped with chucks or adapters. Elevate your material processing with these high-performance tools.
    Lead Time: 18 Days
    List £144.00
    £55.00
    Inc Vat £66.00
    As low as £58.08
  9. CMT Carbide Router bit for Aluminium and PVC D16 I25 L82 S16
    CMT part no:186.160.11 CMT Aluminium PVC Router Bit D6 I15 L60 S6 Solid Carbide Upcut Spiral Bits, tailor-made for aluminum and PVC. Crafted from premium quality HWM and featuring 2 spiral cutting edges (Z2), these bits deliver an extra-fine finish with efficient upward chip ejection. Ideal for tasks such as ripping, template routing, and panel sizing on plastic materials and aluminum, even at high feed speeds. These versatile bits are compatible with machining centers, point-to-point machines, CNC routers, and hand-held routers equipped with chucks or adapters. Elevate your material processing with these high-performance tools.
    Lead Time: 18 Days
    List £207.60
    £79.00
    Inc Vat £94.80
    As low as £83.42
  10. CMT Carbide Router bit for Aluminium and PVC D4 I10 L60 S6
    CMT part no:186.640.11 CMT Aluminium PVC Router Bit D4 I10 L60 S6 Solid Carbide Upcut Spiral Bits, tailor-made for aluminum and PVC. Crafted from premium quality HWM and featuring 2 spiral cutting edges (Z2), these bits deliver an extra-fine finish with efficient upward chip ejection. Ideal for tasks such as ripping, template routing, and panel sizing on plastic materials and aluminum, even at high feed speeds. These versatile bits are compatible with machining centers, point-to-point machines, CNC routers, and hand-held routers equipped with chucks or adapters. Elevate your material processing with these high-performance tools.
    Lead Time: 18 Days
    List £43.20
    £20.00
    Inc Vat £24.00
    As low as £21.12
  11. CMT Carbide Router bit for Aluminium and PVC D5 I12 L60 S6
    CMT part no:186.650.11 CMT Aluminium PVC Router Bit D5 I12 L60 S6 Solid Carbide Upcut Spiral Bits, tailor-made for aluminum and PVC. Crafted from premium quality HWM and featuring 2 spiral cutting edges (Z2), these bits deliver an extra-fine finish with efficient upward chip ejection. Ideal for tasks such as ripping, template routing, and panel sizing on plastic materials and aluminum, even at high feed speeds. These versatile bits are compatible with machining centers, point-to-point machines, CNC routers, and hand-held routers equipped with chucks or adapters. Elevate your material processing with these high-performance tools.
    Lead Time: 18 Days
    List £43.20
    £20.00
    Inc Vat £24.00
    As low as £21.12
  12. CMT Carbide Router bit for Aluminium and PVC D6 I15 L60 S6
    CMT part no:186.060.11 CMT Aluminium PVC Router Bit D6 I15 L60 S6 Solid Carbide Upcut Spiral Bits, tailor-made for aluminum and PVC. Crafted from premium quality HWM and featuring 2 spiral cutting edges (Z2), these bits deliver an extra-fine finish with efficient upward chip ejection. Ideal for tasks such as ripping, template routing, and panel sizing on plastic materials and aluminum, even at high feed speeds. These versatile bits are compatible with machining centers, point-to-point machines, CNC routers, and hand-held routers equipped with chucks or adapters. Elevate your material processing with these high-performance tools.
    Lead Time: 18 Days
    List £45.60
    £18.00
    Inc Vat £21.60
    As low as £19.01
  13. CMT Carbide Router bit for Aluminium and PVC D8 I20 L60 S8
    CMT part no:186.080.11 CMT Aluminium PVC Router Bit D6 I15 L60 S6 Solid Carbide Upcut Spiral Bits, tailor-made for aluminum and PVC. Crafted from premium quality HWM and featuring 2 spiral cutting edges (Z2), these bits deliver an extra-fine finish with efficient upward chip ejection. Ideal for tasks such as ripping, template routing, and panel sizing on plastic materials and aluminum, even at high feed speeds. These versatile bits are compatible with machining centers, point-to-point machines, CNC routers, and hand-held routers equipped with chucks or adapters. Elevate your material processing with these high-performance tools.
    In Stock
    List £51.60
    £20.00
    Inc Vat £24.00
    As low as £21.12
View as Grid List

Items 1-48 of 82

Page
per page
Filter By
Set Descending Direction