Raised Panel Router Bits
(51 Products)
A raised panel router bit is a cutting tool used in woodworking to create a decorative raised panel on a cabinet door or other woodworking project. The bit has a large cutting surface that creates a decorative profile on the edge of the panel and a smaller cutting surface that shapes the raised portion of the panel.
Raised panel router bits come in a variety of sizes and shapes, with different profiles and degrees of curvature. They can be used with a router table to create a precise and consistent cut. Some raised panel router bits also include a back cutter, which creates a groove on the back of the panel to fit into the door frame.
When using a raised panel router bit, it's important to take proper safety precautions, such as wearing eye and ear protection and using a secure surface to hold the workpiece. It's also important to use the proper technique to ensure that the cut is consistent and even along the entire length of the panel. Using a featherboard can help keep the workpiece securely in place while cutting, and taking multiple passes with the router can help ensure a clean and precise cut.
-
CMT part no:870.504.11 These bits can be used for decorative work on solid wood panels and MDF materials. Use them in one pass or in combination with CMT's MDF panel bits for complex and intricate profiles. A simple approach for an elegant appearance. Featuring large cutting diameters and available in the most popular profiles, these panel bits guarantee excellent performance on both solid wood panels and MDF materials.In Stock -
CMT part no:870.501.11 These bits can be used for decorative work on solid wood panels and MDF materials. Use them in one pass or in combination with CMT's MDF panel bits for complex and intricate profiles. A simple approach for an elegant appearance. Featuring large cutting diameters and available in the most popular profiles, these panel bits guarantee excellent performance on both solid wood panels and MDF materials.In Stock -
CMT part no:890.501.11 We offer you the traditional approach to panel construction with the CMT raised panel bit. Make classic raised panel doors as shown in the profiles below. These raised panel bits have carbide-faced cutting edges and are equipped with our anti-kickback design and orange non-stick coating to further increase your safety when working with larger diameter bits.In Stock -
CMT part no:890.504.11 We offer you the traditional approach to panel construction with the CMT raised panel bit. Make classic raised panel doors as shown in the profiles below. These raised panel bits have carbide-faced cutting edges and are equipped with our anti-kickback design and orange non-stick coating to further increase your safety when working with larger diameter bits.In Stock -
CMT part no:890.502.11 We offer you the traditional approach to panel construction with the CMT raised panel bit. Make classic raised panel doors as shown in the profiles below. These raised panel bits have carbide-faced cutting edges and are equipped with our anti-kickback design and orange non-stick coating to further increase your safety when working with larger diameter bits.Lead Time: 16 Days -
CMT part no:890.505.11 We offer you the traditional approach to panel construction with the CMT raised panel bit. Make classic raised panel doors as shown in the profiles below. These raised panel bits have carbide-faced cutting edges and are equipped with our anti-kickback design and orange non-stick coating to further increase your safety when working with larger diameter bits.Lead Time: 16 Days -
CMT part no:890.512.11 We offer you the traditional approach to panel construction with the CMT raised panel bit. Make classic raised panel doors as shown in the profiles below. These raised panel bits have carbide-faced cutting edges and are equipped with our anti-kickback design and orange non-stick coating to further increase your safety when working with larger diameter bits. With BearingLead Time: 16 Days -
CMT part no:890.503.11 We offer you the traditional approach to panel construction with the CMT raised panel bit. Make classic raised panel doors as shown in the profiles below. These raised panel bits have carbide-faced cutting edges and are equipped with our anti-kickback design and orange non-stick coating to further increase your safety when working with larger diameter bits.In Stock -
CMT part no:890.506.11 We offer you the traditional approach to panel construction with the CMT raised panel bit. Make classic raised panel doors as shown in the profiles below. These raised panel bits have carbide-faced cutting edges and are equipped with our anti-kickback design and orange non-stick coating to further increase your safety when working with larger diameter bits.Lead Time: 16 Days -
CMT part no:890.507.11 We offer you the traditional approach to panel construction with the CMT raised panel bit. Make classic raised panel doors as shown in the profiles below. These raised panel bits have carbide-faced cutting edges and are equipped with our anti-kickback design and orange non-stick coating to further increase your safety when working with larger diameter bits.Lead Time: 16 Days -
- Material Composition: Bar stock steel with HW German TCT for exceptional durability and cutting performance.
- Configuration: z2 (2 knife) design for precise and clean cuts.
- Rotation: Right-hand (RH) orientation, suitable for table routers only, ensuring compatibility and optimal performance.
In Stock -
- Material: The bits are made from HW German TCT (Tungsten Carbide-Tipped), ensuring durability and sustained sharpness over extensive use.
- Cutting Configuration: Features a z2 (2 knife) configuration for efficient and clean cuts.
- Direction: Designed for right-hand (RH) operation, these bits are specifically intended for use with table routers.
Lead Time: 16 Days -
CMT part no:900.522.11 This set transforms the way intricate frame and panel details are conceived, enabling the creation of features as diminutive as 70mm (1-3/4") square in materials as thin as 11mm (7/16"). Beyond the realm of delicate panel doors, these bits unlock the potential to incorporate captivating arches into your designs, using templates for unmatched accuracy. With a selection between a cove or ogee raised panel bit, coupled with an ogee rail & stile pair, this set is a testament to versatility and precision, all packaged in a beautifully crafted case. Benefits: - Micro Precision: Tailor your craftsmanship to include detailed frame and panel work on a significantly smaller scale, expanding the possibilities of design and functionality. - Creative Freedom: Equipped with options for cove or ogee profiles and the addition of rail & stile pairs, this set empowers woodworkers to explore a variety of aesthetic directions. - Advanced Design Capabilities: Utilize these bits with templates to add sophisticated arches and other intricate features, enhancing the visual appeal of your projects. - Superior Presentation: Each set is encased in an elegantly designed box, reflecting the quality of the tools within and making it an ideal gift for any woodworking aficionado. CMT's 3 Piece Junior Raised Panel Set stands as an emblem of innovation in woodworking, offering an unrivaled blend of precision, versatility, and safety. This set not only facilitates the crafting of traditional woodworking projects on a smaller scale but also inspires the exploration of new, intricate designs. Whether you're aiming to produce delicate panel doors or seeking to add elaborate arches to your work, this toolkit equips you with the essential tools to elevate your woodworking artistry to new heights. Technical Specifications: Material: Crafted with HW German TCT (Tungsten Carbide-Tipped) for enduring sharpness and efficiency. Configuration: Includes 2 knives (z2) for precise cutting action. Rotation: Right-hand (RH) orientation to complement the natural operation of table routers. Safety Features: Designed with anti-kickback properties to ensure a safer working environment. Tool with Bearing: Features bearings for guided routing, enabling smoother and more controlled cuts. Usage: Specifically engineered for use with table routers, not suitable for hand routers. Axial Angle: Optimized for effective chip removal and quality of cut, enhancing overall performance.Lead Time: 16 Days -
- Direction of Use: Right-hand (RH) orientation, optimised for conventional routing directions, promoting tool efficiency and lifespan.
- Material Composition: The bits boast HW Tungsten Carbide tips for unmatched resistance to wear and longevity.
- Safety Features: Outfitted with anti-kickback functionality and a guide bearing to secure user safety and operational ease.
Lead Time: 16 Days -
- Direction of Use: Right-hand (RH) orientation, optimised for conventional routing directions, promoting tool efficiency and lifespan.
- Material Composition: The bits boast HW Tungsten Carbide tips for unmatched resistance to wear and longevity.
- Safety Features: Outfitted with anti-kickback functionality and a guide bearing to secure user safety and operational ease.
Lead Time: 16 Days -
- Direction of Use: Right-hand (RH) orientation, optimised for conventional routing directions, promoting tool efficiency and lifespan.
- Material Composition: The bits boast HW Tungsten Carbide tips for unmatched resistance to wear and longevity.
- Safety Features: Outfitted with anti-kickback functionality and a guide bearing to secure user safety and operational ease.
Lead Time: 16 Days -
- Material Composition: Bar stock steel with HW German TCT for exceptional durability and cutting performance.
- Configuration: z2 (2 knife) design for precise and clean cuts.
- Rotation: Right-hand (RH) orientation, suitable for table routers only, ensuring compatibility and optimal performance.
Lead Time: 16 Days -
- Material Composition: Bar stock steel with HW German TCT for exceptional durability and cutting performance.
- Configuration: z2 (2 knife) design for precise and clean cuts.
- Rotation: Right-hand (RH) orientation, suitable for table routers only, ensuring compatibility and optimal performance.
Lead Time: 16 Days -
- Material Composition: Bar stock steel with HW German TCT for exceptional durability and cutting performance.
- Configuration: z2 (2 knife) design for precise and clean cuts.
- Rotation: Right-hand (RH) orientation, suitable for table routers only, ensuring compatibility and optimal performance.
Lead Time: 16 Days -
- Material: The bits are made from HW German TCT (Tungsten Carbide-Tipped), ensuring durability and sustained sharpness over extensive use.
- Cutting Configuration: Features a z2 (2 knife) configuration for efficient and clean cuts.
- Direction: Designed for right-hand (RH) operation, these bits are specifically intended for use with table routers.
Lead Time: 16 Days -
CMT part no:900.518.11 This set transforms the way intricate frame and panel details are conceived, enabling the creation of features as diminutive as 70mm (1-3/4") square in materials as thin as 11mm (7/16"). Beyond the realm of delicate panel doors, these bits unlock the potential to incorporate captivating arches into your designs, using templates for unmatched accuracy. With a selection between a cove or ogee raised panel bit, coupled with an ogee rail & stile pair, this set is a testament to versatility and precision, all packaged in a beautifully crafted case. Benefits: - Micro Precision: Tailor your craftsmanship to include detailed frame and panel work on a significantly smaller scale, expanding the possibilities of design and functionality. - Creative Freedom: Equipped with options for cove or ogee profiles and the addition of rail & stile pairs, this set empowers woodworkers to explore a variety of aesthetic directions. - Advanced Design Capabilities: Utilize these bits with templates to add sophisticated arches and other intricate features, enhancing the visual appeal of your projects. - Superior Presentation: Each set is encased in an elegantly designed box, reflecting the quality of the tools within and making it an ideal gift for any woodworking aficionado. CMT's 3 Piece Junior Raised Panel Set stands as an emblem of innovation in woodworking, offering an unrivaled blend of precision, versatility, and safety. This set not only facilitates the crafting of traditional woodworking projects on a smaller scale but also inspires the exploration of new, intricate designs. Whether you're aiming to produce delicate panel doors or seeking to add elaborate arches to your work, this toolkit equips you with the essential tools to elevate your woodworking artistry to new heights. Technical Specifications: Material: Crafted with HW German TCT (Tungsten Carbide-Tipped) for enduring sharpness and efficiency. Configuration: Includes 2 knives (z2) for precise cutting action. Rotation: Right-hand (RH) orientation to complement the natural operation of table routers. Safety Features: Designed with anti-kickback properties to ensure a safer working environment. Tool with Bearing: Features bearings for guided routing, enabling smoother and more controlled cuts. Usage: Specifically engineered for use with table routers, not suitable for hand routers. Axial Angle: Optimized for effective chip removal and quality of cut, enhancing overall performance.Lead Time: 16 Days -
CMT part no:970.504.11 These bits can be used for decorative work on solid wood panels and MDF materials. Use them in one pass or in combination with CMT's MDF panel bits for complex and intricate profiles. A simple approach for an elegant appearance. Featuring large cutting diameters and available in the most popular profiles, these panel bits guarantee excellent performance on both solid wood panels and MDF materials.Lead Time: 16 Days -
CMT part no:970.503.11 These bits can be used for decorative work on solid wood panels and MDF materials. Use them in one pass or in combination with CMT's MDF panel bits for complex and intricate profiles. A simple approach for an elegant appearance. Featuring large cutting diameters and available in the most popular profiles, these panel bits guarantee excellent performance on both solid wood panels and MDF materials.Lead Time: 16 Days -
CMT part no:970.501.11 These bits can be used for decorative work on solid wood panels and MDF materials. Use them in one pass or in combination with CMT's MDF panel bits for complex and intricate profiles. A simple approach for an elegant appearance. Featuring large cutting diameters and available in the most popular profiles, these panel bits guarantee excellent performance on both solid wood panels and MDF materials.In Stock -
CMT part no:970.502.11 These bits can be used for decorative work on solid wood panels and MDF materials. Use them in one pass or in combination with CMT's MDF panel bits for complex and intricate profiles. A simple approach for an elegant appearance. Featuring large cutting diameters and available in the most popular profiles, these panel bits guarantee excellent performance on both solid wood panels and MDF materials.Lead Time: 16 Days -
CMT part no:990.501.11 We offer you the traditional approach to panel construction with the CMT raised panel bit. Make classic raised panel doors as shown in the profiles below. These raised panel bits have carbide-faced cutting edges and are equipped with our anti-kickback design and orange non-stick coating to further increase your safety when working with larger diameter bits.Lead Time: 16 Days -
CMT part no:990.504.11 We offer you the traditional approach to panel construction with the CMT raised panel bit. Make classic raised panel doors as shown in the profiles below. These raised panel bits have carbide-faced cutting edges and are equipped with our anti-kickback design and orange non-stick coating to further increase your safety when working with larger diameter bits.Lead Time: 16 Days -
CMT part no:990.502.11 We offer you the traditional approach to panel construction with the CMT raised panel bit. Make classic raised panel doors as shown in the profiles below. These raised panel bits have carbide-faced cutting edges and are equipped with our anti-kickback design and orange non-stick coating to further increase your safety when working with larger diameter bits.Lead Time: 16 Days -
CMT part no:990.505.11 We offer you the traditional approach to panel construction with the CMT raised panel bit. Make classic raised panel doors as shown in the profiles below. These raised panel bits have carbide-faced cutting edges and are equipped with our anti-kickback design and orange non-stick coating to further increase your safety when working with larger diameter bits.In Stock -
CMT part no:990.503.11 We offer you the traditional approach to panel construction with the CMT raised panel bit. Make classic raised panel doors as shown in the profiles below. These raised panel bits have carbide-faced cutting edges and are equipped with our anti-kickback design and orange non-stick coating to further increase your safety when working with larger diameter bits.Lead Time: 16 Days -
CMT part no:990.506.11 We offer you the traditional approach to panel construction with the CMT raised panel bit. Make classic raised panel doors as shown in the profiles below. These raised panel bits have carbide-faced cutting edges and are equipped with our anti-kickback design and orange non-stick coating to further increase your safety when working with larger diameter bits.Lead Time: 16 Days -
CMT part no:990.507.11 We offer you the traditional approach to panel construction with the CMT raised panel bit. Make classic raised panel doors as shown in the profiles below. These raised panel bits have carbide-faced cutting edges and are equipped with our anti-kickback design and orange non-stick coating to further increase your safety when working with larger diameter bits.Lead Time: 16 Days -
Trend 18/19X1/2TC D=67.7 mm D2=6.0 C=19 mm A=25 degrees Shank Diameter=1/2 inch . Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised Panel cutters run best at lower spLead Time: 11 Days -
Trend 18/21X1/2TC D=50 mm D2=22 mm C=14 mm R=14 mm Shank Diameter=1/2 inch . Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised Panel cutters run best at lower spLead Time: 11 Days -
Trend 18/24X1/2TC D=50 mm D2=16.0 C=14 mm R=12.0 Shank Diameter=1/2 inch . Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised Panel cutters run best at lower spLead Time: 11 Days -
Trend 18/80X1/2TC D=86.0 C=1/2 inch C=12.7 mm B=12.7 mm A=15 degrees Shank Diameter=1/2 inch . Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised Panel cutters run best at lower spLead Time: 11 Days
