Slotting & Grooving
(233 Products)A slotting and grooving router bit is a cutting tool used in woodworking to create a groove or slot on a workpiece. The cutter has a flat bottom cutting surface that allows it to remove material in a straight line, creating a precise and consistent cut.
Slotting and grooving router bits come in a variety of sizes and shapes, with different widths and depths of cut. They can be used to create grooves for inserting panels or decorative accents on cabinet doors or other woodworking projects. They can also be used for joinery, such as creating slots for biscuit or spline joints.
When using a slotting and grooving router bit, it's important to take proper safety precautions, such as wearing eye and ear protection and using a secure surface to hold the workpiece. It's also important to use the proper technique to ensure that the cut is consistent and even along the entire length of the workpiece. Taking multiple passes with the router and adjusting the depth of cut can help achieve a clean and precise cut. A featherboard can also help keep the workpiece securely in place while cutting.
Find the right CMT Orange Tools: Browse the Latest 440 Page CMT Orange Tools Catalogue
-
CMT part no:712.030.11 Make your house more energy efficient by insulating old doors and windows. A CMT Weatherseal bit is the perfect bit to re-groove door and window frames to accommodate wind blocking inserts. Made of solid carbide for strength and endurance. Special economical double-sided design lets you save money by offering two tips in one bit; with the same features as the one-sided weatherseal bit. Only available with a 3mm (1/8") cutting diametre.In Stock
-
CMT part no:712.040.11 Make your house more energy efficient by insulating old doors and windows. A CMT Weatherseal bit is the perfect bit to re-groove door and window frames to accommodate wind blocking inserts. Made of solid carbide for strength and endurance. Special economical double-sided design lets you save money by offering two tips in one bit; with the same features as the one-sided weatherseal bit. Only available with a 3mm (1/8") cutting diametre.In Stock
-
CMT part no:713.001.11 Make your house more energy efficient by insulating old doors and windows. A CMT Weatherseal bit is the perfect bit to re-groove door and window frames to accommodate wind blocking inserts. Made of solid carbide for strength and endurance. Special economical double-sided design lets you save money by offering two tips in one bit; with the same features as the one-sided weatherseal bit. Only available with a 3mm (1/8") cutting diametre.Lead Time: 18 Days
-
CMT part no:722.315.11A Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.In Stock
-
CMT part no:722.320.11A Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.In Stock
-
CMT part no:722.325.11A Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:722.330.11A Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.In Stock
-
CMT part no:722.335.11A Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:722.340.11A Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:722.350.11A Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:722.360.11A Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:800.506.11 Create slots, grooves and rabbets in materials from 3,2mm to 18mm in depth by using the adjustable CMT Three Wing slot cutter set. See chart below for details on spacing and correct cutter combinations. Ideal for biscuit joints and milling perfect tongue and groove joints. This set includes: - 4 carbide tipped cutters 3,2mm, 4mm, 4,8mm, 6,4mm - 1 arbor 12mm or 12,7mm - 1 ball bearing (22mm) for 12,7mm cut - 17 shims: (8x0,1mm - 4x0,5mm - 3x1mm and 2x4mm) Safety tips: Never use the slot cutter set without shims between the cutters. The distance between the cutters can vary from 1mm to 1,7mm. A shim must also be positioned between the ball bearing and the cutters. Shop tips: The bearings kit 791.711.00 allows to make 6,35 and 9,5mm cutting depth.In Stock
-
CMT part no:800.626.11 Make tongue and groove joints without the complicated process of taking apart and reassembling bits. The new CMT tongue and groove set gives you one bit to groove the slot and a separate bit to mill the tongue. Or use your imagination and put them to work individually on other projects. Makes tongue and groove cuts in wood up to 19mm thick. Exclusive CMT design which allows the perfect fix for undersized plywood panel. The tongue cutter features opposing shear angles to obtain flawless finishing on a large variety of materials such as plywood, softwood and hardwood. For use on a table-mounted router, not for handheld routers.Lead Time: 18 Days
-
CMT part no:922.315.11A Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:922.315.11B Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:922.320.11A Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:922.320.11B Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:922.325.11A Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:922.325.11B Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.In Stock
-
CMT part no:922.330.11A Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:922.330.11B Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:922.335.11A Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:922.335.11B Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.In Stock
-
CMT part no:922.340.11A Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:922.340.11B Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:922.350.11A Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:922.350.11B Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:922.360.11A Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:922.360.11B Uses for the CMT three wing slot cutter are almost infinite. Cut slots and grooves for splines, biscuits, Tmolding or tongue and groove joints. Every cutter features anti-kickback design, micrograin carbide tips and orange CMT trademark non-stick PTFE coating. CMT slot cutters are available as a blade only or with your choice of a 6, 8, 12, 6,35 or 12,7mm diameter arbor which includes a 22mm diameter bearing for a cutting depth of up to 12,7mm. Note: For biscuit joints, use I=4mm slot cutter.Lead Time: 18 Days
-
CMT part no:923.001.11 Create slots, grooves and rabbets on all materials using the CMT slot cutter sets. Ideal for biscuit and tongue and groove joints. These sets include 4 different bearings to allow a cutting depth of 7,95mm, 9,5mm, 12,8mm and 14,3mm. Please refer to the chart below for applications and the correct cutter combinations. Safety tips: never use the slot cutter sets without shims between cutters, whose distance can vary from 1mm to 1,7mm. Shims can also be positioned between the ball bearings and the cutters.In Stock
-
CMT part no:923.330.11A The possible uses of this bit are almost: you can rout grooves and ribates, T or dovetail joints on wood panels. Each bit has three carbide tipped cutters and has an orange coloured PTFE coating, it features anti-kickback design too. The 22mm bearing is included for a cutting depth of 12,8mm. The bit and the slot cutter are available also separately.Lead Time: 18 Days
-
CMT part no:923.340.11A The possible uses of this bit are almost: you can rout grooves and ribates, T or dovetail joints on wood panels. Each bit has three carbide tipped cutters and has an orange coloured PTFE coating, it features anti-kickback design too. The 22mm bearing is included for a cutting depth of 12,8mm. The bit and the slot cutter are available also separately.In Stock
-
CMT part no:923.350.11A The possible uses of this bit are almost: you can rout grooves and ribates, T or dovetail joints on wood panels. Each bit has three carbide tipped cutters and has an orange coloured PTFE coating, it features anti-kickback design too. The 22mm bearing is included for a cutting depth of 12,8mm. The bit and the slot cutter are available also separately.In Stock