Spiral Upcut Router Bits
(140 Products)
Spiral upcut router bits are cutting tool used to create precise cuts and decorative profiles on a workpiece. It features a spiral-shaped cutting edge that spirals up the shank of the bit, which helps to pull wood chips up and away from the workpiece as it cuts, resulting in a cleaner and more efficient cutting action.
The upcut design of the spiral router bit means that the cutting edge is angled upward, which helps to lift the material being cut up and away from the workpiece, reducing the chance of tear-out and creating a smoother finish. This design is particularly useful when working with materials that tend to chip or splinter easily, such as plywood or melamine.
CNC Router Tool Finder
-
CMT part no:195.143.11 CMT 195 series upcut spiral bits with chip-breaker for 60 degree v-point locksets TECHNICAL DETAILS: - Premium quality solid TC - 3 spiral cutting edges (Z3) - Provides an excellent finish on the lower side of the workpiece - Upward chip ejection APPLICATION: used for ripping, template routing, panel sizing and any routing applications in solid wood, or wood composites. Can be used at a high feed speed on well-clamped workpieces Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptorsLead Time: 17 Days -
CMT part no: 198.660.11 Upcut Spiral Bit Z1 Neg. Hwm D=6x27x60 Dx SOLID CARBIDE DOWNCUT SPIRAL BITS 198.660.11 SHARP TECHNOLOGY WITH A NEW TWIST A special super-micrograin carbide formulation was created to produce and hold a keen cutting edge. The new low-angle spiral is designed specifically to shear wood cleanly and provide efficient chip ejection. The tools run cooler and the edges last longer. INCREASED FEED RATE AND IMPROVED CUTTING QUALITY FOR ENHANCED PRODUCTIVITY WITH CMT! TECHNICAL FEATURES: -Premium quality HWM. -1 spiral cutting edge (Z1). -Provide an excellent finish on the lower side of the workpiece. -DOWNWARD CHIP EJECTION. Application Used for cutting, copying, panel sizing and any routing applications on solid wood, wood composites, plastic materials and laminates. Use a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors.In Stock -
CMT part no:195.144.11 TECHNICAL DETAILS: - Premium quality solid micrograin tungsten carbide - 3 spiral cutting edges (Z3R) - Chip breaker teeth - Tooth depth max 0.3 mm - Provides an excellent finish on the lower side of the workpiece - Upward chip ejection APPLICATION: used for ripping, template routing, panel sizing and any routing applications in solid wood, or wood composites. Can be used at a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors.In Stock -
TREND O flute Spiral up-cut 10 x 32 x 60 x 10mm Trend part no : CNC/407X10STC D1 10 mm C 32 mm OL 60 mm Shank Diameter 10 mm Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 1- 10m/min of 18000 - 24000 RPM. For use with plastics. Fine finish. Up-cut prevents burning in plunge cuts. O flute design for fast cutting. Increased feed rates allowing for more linear metres in less time. High feed speed. Two flute. Solid Tungsten Carbide.Lead Time: 9 Days£55.00£66.00As low as £59.40 -
TREND O flute Spiral up-cut 4 x 17 x 45 x 4mm Trend part no : CNC/401X4STC D1 4 mm C 17 mm OL 45 mm Shank Diameter 4 mm Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 1- 10m/min of 18000 - 24000 RPM. For use with plastics. Fine finish. Up-cut prevents burning in plunge cuts. O flute design for fast cutting. Increased feed rates allowing for more linear metres in less time. High feed speed. Two flute. Solid Tungsten Carbide.Lead Time: 9 Days£17.00£20.40As low as £18.36 -
TREND O flute Spiral up-cut 10 x 22 x 50 x 10mm Trend part no : CNC/406X10STC D1 10 mm C 22 mm OL 50 mm Shank Diameter 10 mm Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 1- 10m/min of 18000 - 24000 RPM. For use with plastics. Fine finish. Up-cut prevents burning in plunge cuts. O flute design for fast cutting. Increased feed rates allowing for more linear metres in less time. High feed speed. Two flute. Solid Tungsten Carbide.Lead Time: 9 Days£44.00£52.80As low as £47.52 -
TREND O flute Spiral up-cut 4 x 28 x 50 x 4mm Trend part no : CNC/402X4STC D1 4 mm C 28 mm OL 50 mm Shank Diameter 4 mm Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 1- 10m/min of 18000 - 24000 RPM. For use with plastics. Fine finish. Up-cut prevents burning in plunge cuts. O flute design for fast cutting. Increased feed rates allowing for more linear metres in less time. High feed speed. Two flute. Solid Tungsten Carbide.Lead Time: 9 Days£23.00£27.60As low as £24.84 -
TREND O flute Spiral up-cut 6 x 22 x 50 x 6mm Trend part no : CNC/403X6STC D1 6 mm C 22 mm OL 50 mm Shank Diameter 6 mm Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 1- 10m/min of 18000 - 24000 RPM. For use with plastics. Fine finish. Up-cut prevents burning in plunge cuts. O flute design for fast cutting. Increased feed rates allowing for more linear metres in less time. High feed speed. Two flute. Solid Tungsten Carbide.Lead Time: 9 Days£27.00£32.40As low as £29.16 -
TREND O flute Spiral up-cut 8 x 22 x 50 x 8mm Trend part no : CNC/404X8STC Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. D1 8 mm C 22 mm OL 50 mm Shank Diameter 8 mm Feed rates range from 1- 10m/min of 18000 - 24000 RPM. For use with plastics. Fine finish. Up-cut prevents burning in plunge cuts. O flute design for fast cutting. Increased feed rates allowing for more linear metres in less time. High feed speed. Two flute. Solid Tungsten Carbide.Lead Time: 9 Days£34.00£40.80As low as £36.72 -
TREND O flute Spiral up-cut 8 x 32 x 60 x 8mm Trend part no : CNC/405X8STC D1 8 mm C 32 mm OL 60 mm Shank Diameter 8 mm Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 1- 10m/min of 18000 - 24000 RPM. For use with plastics. Fine finish. Up-cut prevents burning in plunge cuts. O flute design for fast cutting. Increased feed rates allowing for more linear metres in less time. High feed speed. Two flute. Solid Tungsten Carbide.Lead Time: 9 Days£40.00£48.00As low as £43.20 -
TREND Spiral up-cut 4 x 12 x 45 x 4mm Trend part no : CNC/001X4STC D1 4 mm C 12 mm OL 45 mm Shank Diameter 4 mm Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 1 - 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material. Fine finish. Up-cut prevents burning in plunge cuts. High feed speed. Two flute. Solid Tungsten Carbide.Lead Time: 9 Days£16.00£19.20As low as £17.28 -
TREND Spiral up-cut 4 x 17 x 45 x 4mm Trend part no : CNC/002X4STC D1 4 mm C 17 mm OL 45 mm Shank Diameter 4 mm Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 1 - 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material. Fine finish. Up-cut prevents burning in plunge cuts. High feed speed. Two flute. Solid Tungsten Carbide.Lead Time: 9 Days£17.00£20.40As low as £18.36 -
TREND Spiral up-cut 4 x 25 x 55 x 4mm Trend part no : CNC/003X4STC D1 4 mm C 22 mm OL 55 mm Shank Diameter 4 mm Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 1- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material. Fine finish. Up-cut prevents burning in plunge cuts. High feed speed. Two flute. Solid Tungsten Carbide.Lead Time: 9 Days£22.00£26.40As low as £23.76 -
TREND Spiral up-cut 4 x 32 x 60 x 4mm Trend part no : CNC/004X4STC D1 4 mm C 32 mm OL 60 mm Shank Diameter 4 mm Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 1- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material. Fine finish. Up-cut prevents burning in plunge cuts. High feed speed. Two flute. Solid Tungsten Carbide.Lead Time: 9 Days£25.00£30.00As low as £27.00 -
TREND Spiral up-cut 6 x 17 x 45 x 6mm Trend part no : CNC/005X6STC D1 6 mm C 17 mm OL 45 mm Shank Diameter 6 mm Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 1- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material. Fine finish. Up-cut prevents burning in plunge cuts. High feed speed. Two flute. Solid Tungsten Carbide.Lead Time: 9 Days£26.00£31.20As low as £28.08 -
TREND Spiral up-cut 6 x 25 x 55 x 6mm Trend part no : CNC/006X6STC D1 6 mm C 25 mm OL 55 mm Shank Diameter 6 mm Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 1- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material. Fine finish. Up-cut prevents burning in plunge cuts. High feed speed. Two flute. Solid Tungsten Carbide.Lead Time: 9 Days£27.00£32.40As low as £29.16 -
TREND Spiral up-cut 6 x 28 x 60 x 6mm Trend part no : CNC/007X6STC D1 6 mm C 28 mm OL 60 mm Shank Diameter 6 mm Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 1- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material. Fine finish. Up-cut prevents burning in plunge cuts. High feed speed. Two flute. Solid Tungsten Carbide.Lead Time: 9 Days£31.00£37.20As low as £33.48 -
TREND Spiral up-cut 6 x 42 x 70 x 6mm Trend part no : CNC/008X6STC D16 mm C42 mm OL70 mm Shank Diameter6 mm Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 1- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material. Fine finish. Up-cut prevents burning in plunge cuts. High feed speed. Two flute. Solid Tungsten Carbide.Lead Time: 9 Days£38.00£45.60As low as £41.04 -
TREND Spiral up-cut 8 x 22 x 50 x 8mm Trend part no : CNC/009X8STC D18 mm C22 mm OL50 mm Shank Diameter 8 mm Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 1- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material. Fine finish. Up-cut prevents burning in plunge cuts. High feed speed. Two flute. Solid Tungsten Carbide.Lead Time: 9 Days£34.00£40.80As low as £36.72 -
TREND Spiral up-cut 8 x 32 x 60 x 8mm Trend part no : CNC/010X8STC D18 mm C32 mm OL60 mm Shank Diameter8 mm Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 1- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material. Fine finish. Up-cut prevents burning in plunge cuts. High feed speed. Two flute. Solid Tungsten Carbide.Lead Time: 9 Days£40.00£48.00As low as £43.20 -
TREND Spiral up-cut 8 x 42 x 70 x 8mm Trend part no : CNC/011X8STC D18 mm C42 mm OL70 mm Shank Diameter8 mm Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 1- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material. Fine finish. Up-cut prevents burning in plunge cuts. High feed speed. Two flute. Solid Tungsten Carbide.Lead Time: 9 Days£45.00£54.00As low as £48.60 -
TREND Spiral up-cut 8 x 52 x 80 x 8mm Trend part no : CNC/012X8STC D18 mm C52 mm OL80 mm Shank Diameter8 mm Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 1- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material. Fine finish. Up-cut prevents burning in plunge cuts. High feed speed. Two flute. Solid Tungsten Carbide.Lead Time: 9 Days£55.00£66.00As low as £59.40 -
CMT part no:195.202.11 CMT 195 series Upcut spiral bits for CNC routers TECHNICAL DETAILS: - Premium quality solid TC by Ceratizit - 3 spiral cutting edges (Z3) - Provides an excellent finish on the lower side of the workpiece - Upward chip ejection APPLICATION: used for ripping, template routing, panel sizing and any routing applications in solid wood, or wood composites. Can be used at a high feed speed on well-clamped workpieces Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with automatic feed.In Stock
