The Brandt Optimat KTD 720 contour edgebander is the perfect machine for when curved or straight edges need to be achieved. The glue pot system applies the glue directly on to the edgebanding material which then feeds through on to the powered roller, where the work is pushed aginst the edging on to the roller allowing you to achieve curved edges on the tightest of radiuses. The coil-cut off device is activated by foot pedal leaving your hands free to guide the work piece .This has to be one of the most universal machines on the market at present with a good quality build.
Hot melt Glue pot
Work piece up to 55 mm thick
Pneumatic edging cutoff via Foot pedal
Minimum working length 180 mm
Digital length control for cutting off from the coil.
Thermostatic glue temperature control.
Workpiece guided by means of driven pressure roller, workpiece fed manually.
Automatic edge in feed for coils, electro-magnetically controlled by foot switch activation (shaped or straight workpieces).
Model KTD 720
Year of manufacture 2013 CE
Workpiece thickness 10-55mm
Workpiece width min. (approx.) 30mm
Workpiece length min. 180mm
Edge thickness of 0.5-1.0mm = edge height max 60mm
Edge thickness of 1.0mm-3.0mm = edge height max 30mm
Internal radius min. (approx.) 25mm for edges up to 1mm thick Feed speed (variable) 4 to 9 m/min
Space requirement 2000mm x 1250mm
Table height 920mm
Machine net weight 280kg
Electrical connection 415v 3-phase 50Hz
Connected load 3.0 kw
Compressed air connection 6 bar (85psi)