Portable Edgebanders
(23 Products)
-
- Panel thickness min-max 10 - 45 mm
- Edge thickness min-max 0,4-2,0 mm
- Feed Speed 7 m/min
In StockList £11,280.00£8,495.00Inc Vat £10,194.00 -
CMT part no:DET-001 Attach this trimmer to your workpiece, press both ends against the board for a cutting range between 13mm (1/2") and 25mm (1"), move the trimmer in the correct direction indicated by the arrow. This will cut on both sides easily. The first cutter will cut straight, the second one can be adjusted for a chamfer cut. Both cutters are made from high-quality hardened steel and can be easily replaced when worn out [ Part no CMDET001K] suitable for up to 0.6mm edgingIn StockList £31.20£21.00Inc Vat £25.20 -
CMT part no:DET-002 Edge banding end trimmer An indispensable tool for easy and safe end trimming after edge banding. Position the tool on the banding, press down on the handle to operate the blade in a shearing action. The cutting knives are interchangeable, so when the cutting knife becomes dull, you can simply replace it with the anvil knife for a double lifetime. For cutting banding up to 0,5mm thick with a maximum cutting width of 54mm. This tool can also be paired up with our double edge trimmer DET-001. We recommend using our edge banding end trimmer DET-002 before using our double-edge trimmer DET-001.In StockList £70.80£47.00Inc Vat £56.40 -
CMT part no:DET-004 CMT Edgebanding Iron 230v Apply pre-glued edge banding easily and accurately. The iron non-stick surface allows smooth and easy application. The thermostatically controlled short preheat time gets you working quicker. Includes heat resistant metal base to place iron when not using it. - Includes thermostatic heat control. - Non-stick coating. - Specially shaped shoe with rounded edges. - Metal stand. - 154cm (5-1/2') power cord, 230V.In StockList £86.40£58.00Inc Vat £69.60 -
Made with both professionals and hobbyists in mind, the VH03 Vacuum Clamp Set is suited for edgebanding or edge tape application on large work pieces, including doors, panels, and countertops. Quick Setup Simply adhere the vacuum or C-clamp to stabilizing surface and workpiece, and flip the fasteners. Secure Your Workpieces Each vacuum cup can hold up about 34kg (75lbs) of pressure. Scuff-Free Fastening Since the vacuum cups are made of rubber, there will be no need to worry about potential damage to the workpiece or stabilizing surface. Easy Transportation Each VH03 Vacuum Clamp Set comes with two vacuum clamps and an interlockable Cruiser Case.Lead Time: 15 DaysList £240.00£175.00Inc Vat £210.00 -
Guide Component Kit for ST92A Stationary Worktable for AR50 Edgebanders. Extended bolted-on accessory tool for ST95 Stationary Worktable, ST97 Guide Component Kit is ideal for higher volume production on straight-line edgebanding and trimming operation.Lead Time: 136 Days£195.00£234.00 -
- * Minimum radius 25mm
- * adjustable temperature from 100 to 200 degrees C
- * Applies upto 0.3-3mm thickness edge
Lead Time: 15 DaysList £1,507.20£1,194.00Inc Vat £1,432.80 -
- Model DR500
- Power supply Cordless (Battery)
- Gross Weight 11.1kg
Lead Time: 136 DaysList £1,920.00£1,549.00Inc Vat £1,858.80 -
The Co-Matic ST92A Stationary Worktable converts your Co-Matic AR/BR or DR, Le-Matic portable edgebander into a worktop edgebanding center complete with coil holder and guillotine. It is the solution to workpieces that are difficult to manage with a portable edgebanding or trimmer tool. Compatible with our AR Series edgebander and PD80 Power Trimmer products, this stationary worktable is a lightweight, space-efficient solution for stationary edgeband or edge tape application. Integrated Power Management Embedded outlets and a magnetic on/off switch ensure that any plugged-in tools can be started or stopped with ease. Space-Saving and Portable The table folds for easy transportation and storage. The dimensions of the Comatic ST92A Stationary Table for a Portable Edgebander are 800 mm x 430 mm x 295 mmIn StockList £772.58£495.00Inc Vat £594.00 -
The TK 65 Double End Cutter is the perfect tool for cutting edgebanding tape to the exact length. It is ergonomic and designed for both professionals or site use, this end cutter makes perfect cuts without the need for changing any components or using any extra guides. It has a special support design to ensure perfectly connected and aligned cuts. It can trim edgebanding material up to 0.6- 3 mm thick [depending on width] and a maximum 62 mm wide.Lead Time: 15 DaysList £108.00£85.00Inc Vat £102.00 -
- Double insulation
- Input power: 1.200 watts
- Planing width: 80 mm
In Stock£390.00£468.00
