Emergency Stop Switch, Turn to Release, LBX series
Suitable for indoor or outdoor use
Dimensions of base: 74(H)x74(W)x47.9(D) mm
Approvals IEC60947-5-5
Baco Push Buttons
All actuators have matt chromed bezels and ingress protection to IP65 as standard. Contact blocks, LED modules and transformers can all be purchased separately.
Colour Red/Yellow/Black
Head Diameter 40mm
Head Style Mushroom
Housing Material Plastic
Illuminated No
IP Rating IP66
Length 73.6mm
Mounting Type Surface Mount
Normal State Configuration 1NC
Push Button Material Plastic
Reset Method Twist to Reset
Width 74mm
Lockable foot / palm switch for retro-fitting to woodworking machines for safety
Foot/Palm Switches
94mm diameter pushbutton
Ingress protection to IP67
Five M20 cable entries (one threaded)
IEC418 tamperproof
Impact resistant housing
Rated operational current Ie AC-15 230Vac 6A, DV-13 24Vdc 3A
6000Vac rated impulse withstand voltage
500V rated insulation voltage
Colour Red
Cutout Diameter 22mm
Head Diameter 94mm
Head Style Mushroom
Illuminated No
IP Rating IP65, IP67, IP69K
Length 85mm
Mounting Type Panel
Normal State Configuration 1NO/1NC
Pole and Throw Configuration DPST
Push Button Material Plastic
Reset Method Pull to Reset
Series FAK
Supply Current 6 (ac) A, 32 (dc) A
Supply Voltage 24 V dc, 230 V ac
Width 85mm
No Volt Release (NVR) Switch for Routers.
For Any Power tools Up To 2200 watts
Integral 3 Pin Socket
Separate Start and Stop Buttons
Cover Acts As Emergency Stop
Supplied With 2m Cable and Plug
For use with 220v-240v power tools only
The switch can be mounted to the steel frame of any router table or mounted in any convenient location avoiding the user having to reach under the table to turn the router on and off. The switch also provides a handy emergency stop button.
There is an integral socket built into the underside of the casing. Simply plug your powertool into the socket and connect the plug to your electric supply. 2 Slotted fixing points allow the switch to be used with any router table, commercial or home made.
In order to use a router with an NVR switch you need to be able to lock the router switch in the 'On' position, for hands free operation. If your router has a trigger type switch which cannot be locked on you will need to contact the manufacturer or their distributor to obtain a fastening clip. Some routers can also be rewired to bypass the router switch and use this NVR switch instead.
Mounting bracket hole centres 45mm - 70mm
Fixing bolts supplied M6 x 45mm
Supplied with integral socket, separate start and stop buttons, 2m cable, plug and fixing bolts. For use with any power tools up to 2200watts, 240volts.
Soft Start Motor Brake Relay Module
For Motors up to 11 kW (400V)
IP65 Housing
Complete with Overload Pushbuttons and Fuses
Motor Voltage 3 PH 200V to 480VAC
AuX Voltage Options: 24VDC+11 OVAC+ 230VAC
or 24VDc+400VAC
Start Time Delay 1-20S
Brake Time Delay 1-20S
Adjustable Start Torque 30 to 80%
Adjustable Brake Current 0 to 50ADC
Internal DC Brake and Bridging Contactors
Output Relay and LED Indication of:
Starting and Braking, Phase Failure/ Sequence
Overtemperature of Power Semiconductors
Soft starter brake in an enclosure which replaces 3ph star delta starters. Requires small
amount of additional wiring.
Soft Start Motor Brake Relay
For Motors up to 15kW (400V)
Contact Control
Motor Voltage 3 PH 200V to 480VAC
AuX Voltage Options: 24VDC+110VAC+ 230VAC
or 24VDc+400VAC
Start Time Delay 1-20S
Brake Time Delay 1-20S
Adjustable Start Torque 30 to 800/0
Adjustable Brake Current 0 to 65ADC
Internal DC Brake and Bridging Contactors
Output Relay and LED Indication of:
Starting and Braking, Phase Failure/ Sequence
Overtemperature of Power Semiconductors
Dimensions: 90 x 85 x 120mm
Soft starter brake in an enclosure which replaces 3ph star delta starters. Requires a
small amount of additional wiring.
Soft Start Motor Brake Relay
For Motors up to 7.5kW (40QV)
Contact Control
Motor Voltage 3 PH 200V to 480VAC
AuX Voltage Options: 24VDC+11 OVAC+ 230VAC
or 24VDC+400VAC
Start Time Delay 1-20S
Brake Time Delay 1-20S
Adjustable Start Torque 30 to 80 0AJ
Adjustable Brake Current 0 to 35A DC
Internal DC Brake and Bridging Contactors
Output Relay and LED Indication of:
Starting and Braking, Phase Failure/ Sequence
Overtemperature of Power Semiconductors
Dimensions: 90 x 85 x 120mm
Soft starter brake in an enclosure which replaces 3ph star delta starters. starters.
Requires small amount of wiring.
SOLAX TRIPLE POWER BATTERY - LFP
SolaX Power is delighted to announce compatibility with the new Triple Power high-voltage battery solution. Designed and manufactured by SolaX, Triple Power is offering a NEW 5.8kWh model that can be installed in series with up to 4 batteries enabling 23kWh of storage 3ph or 3 batteries 1ph. The new Triple Power encompasses the very latest in LFP technology which ensures much safer installations with wider temperature tolerances. With a 10-year warranty and 90% depth of discharge, the new Triple Power battery is a flexible, practical, high-performance energy storage solution
Safest LiFePO4 battery
90% DOD
Cycle life>6000 times
IP55 protection level
Floor or wall mounting
Less self consumption
Quick installation
No toxic heavy metals or caustic materials
MSR Static phase converter to run 1.5hp motor
Allows small three phase machinery to be run from a single phase (domestic) supply. Simple dial on front of unit gives setting required dependent upon size of motor (s) being run. For even simpler operation of multimotor applications, see the MMC rotary range of convertors.
MSR phase convertor to run up to 1.5hp motor
Allows small three phase machinery to be run from a single phase (domestic) supply. Simple dial on front of unit gives setting required dependent upon size of motor (s) being run. For even simpler operation of multimotor applications, see the MMC rotary range of convertors.
Ideal for Garage Equipment [Call us for advice HD version might be required for car ramps and lifts] - Transwave phase convertors allow three phase machinery to be run from a single phase (domestic) supply. Simple dial on front of unit gives setting required dependent upon size of motor (s) being run. For even simpler operation of multimotor applications, see the MMC rotary range of convertors.
Technical Specificatio
Dimensions 315 x 510 x 330mm
Weight 36kg
Minimum load 1hp
Maximum load (single motor) 7.5hp
Maximum load (multi motor) 10hp
Supply voltage 220/240V 1 phase
Output voltage 380/415V 3 phase
Proven examples of equipment operated in conjunction with Static Converters
Garage Equipment [Call us for advice HD version might be required for car ramps and lifts]
WOODWORKING MACHINERY Saws: Circular; Band; Re-saws; Rip; Cross-Cut; Panel; Wall; Radial-Arm; Surface Planers; Planer/Moulders; Planer/Thicknessers; Four-Sided Planers; Spindle Moulders; Single-End Tenoners; Chisel Mortisers; Chain Mortisers; Woodturning Lathes; Copy Lathes (Electronic); Copy Lathes (Hydraulic) *; Sanders: Single-Belt; Wide-Belt; Speed; Pad; Disc; Edge & Profile; Routers *; Borers; Multi-Borers; Edgebanders *; Dovetailers *; Feed Units; Dust Extraction Systems .
METALWORKING MACHINERY Lathes ; Milling Machines ; Pedestal Drills; Surface Grinders ; Band Saws ; Power Hacksaws; Polishers; Shapers; Deburring Machines; Guillotines *; Metalworkers *; Power Presses *.
AGRICULTURAL & HORTICULTURAL MACHINERY Produce Conveyors; Grading Equipment ; Rolling Mill/Mixing Equipment; Potting Machinery.
MISCELLANEOUS APPLICATIONS Printing Presses ; Guillotines (Paper/Card) *; Cutting Presses *; Wine Presses *; Looms & Weaving Machinery *; Pugmills; Shoe Repair Machinery *; Window Making Machinery; Glass & uPVC Cutting Machinery; Masonry Saws; Food Processing Equipment
22kw / 30hp Rotary phase convertor - Max Single motor load 15kW/20.0hp
Our TRANSWAVE single to three phase converter provides an artificial means by which a 3 phase motor can be operated from a single-phase supply thereby offering a cost-effective solution to this dilemma. In most instances, no modification to the machine is necessary.
The Rotary Converter is particularly suited to the multi-motor, multi-operator environment. Multi-motor applications can be accommodated up to the maximum loading of the converter provided that the specified maximum single motor load is not exceeded.
The Rotary Converter is often operated in conjunction with machine tools, however it is also suitable for applications where equipment has a heavy starting load or is subjected to an abnormal surge current. Vehicle Hoists, Compressors, Pumps and Extractor Fans fall into this latter category. It should be noted that converters are designed for applications with a cyclic duty. Please seek advice for continuous duty applications.
MSR rotary phase convertor 3hp - Our TRANSWAVE Converter provides an artificial means by which a 3 phase motor can be operated from a single-phase supply thereby offering a cost-effective solution to this dilemma. In most instances, no modification to the machine is necessary.
The Rotary Converter is particularly suited to the multi-motor, multi-operator environment. Multi-motor applications can be accommodated up to the maximum loading of the converter provided that the specified maximum single motor load is not exceeded.
The Rotary Converter is often operated in conjunction with machine tools, however it is also suitable for applications where equipment has a heavy starting load or is subjected to an abnormal surge current. Vehicle Hoists, Compressors, Pumps and Extractor Fans fall into this latter category. It should be noted that converters are designed for applications with a cyclic duty. Please seek advice for continuous duty applications.
Technical Spefication:
Maximum single motor load: 1.5kw/2hp
Maximum load multi motor : 2.2kw/3hp
Dimensions:
Height: 350mm
Width: 510mm
Depth: 350mm
Weight: 44kg
Fuse or circuit breaker: 20amp
Cable size 2.5mm
Trend NVRS/2/115V Voltage=115v
Plug=16amp
Max. load=12amp
End of life=See below for Environmental Policy link
For UK sale only. . A versatile no volt release switch which main function is the remote switching of power tools such as routers when mounted in a router table.
The plug-in no volt release switch can be placed in a convenient position on the table.
Tri
Trend NVRS/2/230V/E Voltage=230v
Plug=13amp
Max. load=12amp
End of life=See below for Environmental Policy link . A versatile no volt release switch whose main function is the remote switching of power tools such as routers when mounted in a router table.
The plug-in no volt release switch can be placed in a convenient position on the table.
Tri
Trend NVRS/2/240V Voltage=240v
Plug=13amp
Max. load=12amp
End of life=See below for Environmental Policy link
For UK sale only. . A versatile no volt release switch whose main function is the remote switching of power tools such as routers when mounted in a router table.
The plug-in no volt release switch can be placed in a convenient position on the table.
Tri
Emergency Stop Switch, Turn to Release, LBX series Suitable for indoor or outdoor use Dimensions of base: 74(H)x74(W)x47.9(D) mm Approvals IEC60947-5-5 Baco Push Buttons All actuators have matt chromed bezels and ingress protection to IP65 as standard. Contact blocks, LED modules and transformers can all be purchased separately. Colour Red/Yellow/Black Head Diameter 40mm Head Style Mushroom Housing Material Plastic Illuminated No IP Rating IP66 Length 73.6mm Mounting Type Surface Mount Normal State Configuration 1NC Push Button Material Plastic Reset Method Twist to Reset Width 74mmIn Stock£64.00£76.80
Lockable foot / palm switch for retro-fitting to woodworking machines for safety Foot/Palm Switches 94mm diameter pushbutton Ingress protection to IP67 Five M20 cable entries (one threaded) IEC418 tamperproof Impact resistant housing Rated operational current Ie AC-15 230Vac 6A, DV-13 24Vdc 3A 6000Vac rated impulse withstand voltage 500V rated insulation voltage Colour Red Cutout Diameter 22mm Head Diameter 94mm Head Style Mushroom Illuminated No IP Rating IP65, IP67, IP69K Length 85mm Mounting Type Panel Normal State Configuration 1NO/1NC Pole and Throw Configuration DPST Push Button Material Plastic Reset Method Pull to Reset Series FAK Supply Current 6 (ac) A, 32 (dc) A Supply Voltage 24 V dc, 230 V ac Width 85mmLead Time: 14 Days£95.00£114.00
No Volt Release (NVR) Switch for Routers. For Any Power tools Up To 2200 watts Integral 3 Pin Socket Separate Start and Stop Buttons Cover Acts As Emergency Stop Supplied With 2m Cable and Plug For use with 220v-240v power tools only The switch can be mounted to the steel frame of any router table or mounted in any convenient location avoiding the user having to reach under the table to turn the router on and off. The switch also provides a handy emergency stop button. There is an integral socket built into the underside of the casing. Simply plug your powertool into the socket and connect the plug to your electric supply. 2 Slotted fixing points allow the switch to be used with any router table, commercial or home made. In order to use a router with an NVR switch you need to be able to lock the router switch in the 'On' position, for hands free operation. If your router has a trigger type switch which cannot be locked on you will need to contact the manufacturer or their distributor to obtain a fastening clip. Some routers can also be rewired to bypass the router switch and use this NVR switch instead. Mounting bracket hole centres 45mm - 70mm Fixing bolts supplied M6 x 45mm Supplied with integral socket, separate start and stop buttons, 2m cable, plug and fixing bolts. For use with any power tools up to 2200watts, 240volts.In Stock£45.00£54.00
Soft Start Motor Brake Relay Module For Motors up to 11 kW (400V) IP65 Housing Complete with Overload Pushbuttons and Fuses Motor Voltage 3 PH 200V to 480VAC AuX Voltage Options: 24VDC+11 OVAC+ 230VAC or 24VDc+400VAC Start Time Delay 1-20S Brake Time Delay 1-20S Adjustable Start Torque 30 to 80% Adjustable Brake Current 0 to 50ADC Internal DC Brake and Bridging Contactors Output Relay and LED Indication of: Starting and Braking, Phase Failure/ Sequence Overtemperature of Power Semiconductors Soft starter brake in an enclosure which replaces 3ph star delta starters. Requires small amount of additional wiring.Lead Time: 10 Days£720.00£864.00
Soft Start Motor Brake Relay For Motors up to 15kW (400V) Contact Control Motor Voltage 3 PH 200V to 480VAC AuX Voltage Options: 24VDC+110VAC+ 230VAC or 24VDc+400VAC Start Time Delay 1-20S Brake Time Delay 1-20S Adjustable Start Torque 30 to 800/0 Adjustable Brake Current 0 to 65ADC Internal DC Brake and Bridging Contactors Output Relay and LED Indication of: Starting and Braking, Phase Failure/ Sequence Overtemperature of Power Semiconductors Dimensions: 90 x 85 x 120mm Soft starter brake in an enclosure which replaces 3ph star delta starters. Requires a small amount of additional wiring.Lead Time: 7 Days£768.90£922.68
Soft Start Motor Brake Relay For Motors up to 7.5kW (40QV) Contact Control Motor Voltage 3 PH 200V to 480VAC AuX Voltage Options: 24VDC+11 OVAC+ 230VAC or 24VDC+400VAC Start Time Delay 1-20S Brake Time Delay 1-20S Adjustable Start Torque 30 to 80 0AJ Adjustable Brake Current 0 to 35A DC Internal DC Brake and Bridging Contactors Output Relay and LED Indication of: Starting and Braking, Phase Failure/ Sequence Overtemperature of Power Semiconductors Dimensions: 90 x 85 x 120mm Soft starter brake in an enclosure which replaces 3ph star delta starters. starters. Requires small amount of wiring.Lead Time: 7 DaysList £954.00£745.00Inc Vat £894.00
SOLAX TRIPLE POWER BATTERY - LFP SolaX Power is delighted to announce compatibility with the new Triple Power high-voltage battery solution. Designed and manufactured by SolaX, Triple Power is offering a NEW 5.8kWh model that can be installed in series with up to 4 batteries enabling 23kWh of storage 3ph or 3 batteries 1ph. The new Triple Power encompasses the very latest in LFP technology which ensures much safer installations with wider temperature tolerances. With a 10-year warranty and 90% depth of discharge, the new Triple Power battery is a flexible, practical, high-performance energy storage solution Safest LiFePO4 battery 90% DOD Cycle life>6000 times IP55 protection level Floor or wall mounting Less self consumption Quick installation No toxic heavy metals or caustic materialsLead Time: 4 DaysList £2,400.00£1,890.00Inc Vat £2,268.00
MSR Static phase converter to run 1.5hp motor Allows small three phase machinery to be run from a single phase (domestic) supply. Simple dial on front of unit gives setting required dependent upon size of motor (s) being run. For even simpler operation of multimotor applications, see the MMC rotary range of convertors.Lead Time: 10 Days£534.00£640.80
MSR phase convertor to run up to 1.5hp motor Allows small three phase machinery to be run from a single phase (domestic) supply. Simple dial on front of unit gives setting required dependent upon size of motor (s) being run. For even simpler operation of multimotor applications, see the MMC rotary range of convertors.Lead Time: 10 Days£627.00£752.40
![Static Phase Convertor 7.5kw [10.0 hp]](https://www.scosarg.com/media/catalog/product/cache/b651487a9880ca73f3ee740c9aa9f44d/m/s/ms10.jpg)
Ideal for Garage Equipment [Call us for advice HD version might be required for car ramps and lifts] - Transwave phase convertors allow three phase machinery to be run from a single phase (domestic) supply. Simple dial on front of unit gives setting required dependent upon size of motor (s) being run. For even simpler operation of multimotor applications, see the MMC rotary range of convertors. Technical Specificatio Dimensions 315 x 510 x 330mm Weight 36kg Minimum load 1hp Maximum load (single motor) 7.5hp Maximum load (multi motor) 10hp Supply voltage 220/240V 1 phase Output voltage 380/415V 3 phase Proven examples of equipment operated in conjunction with Static Converters Garage Equipment [Call us for advice HD version might be required for car ramps and lifts] WOODWORKING MACHINERY Saws: Circular; Band; Re-saws; Rip; Cross-Cut; Panel; Wall; Radial-Arm; Surface Planers; Planer/Moulders; Planer/Thicknessers; Four-Sided Planers; Spindle Moulders; Single-End Tenoners; Chisel Mortisers; Chain Mortisers; Woodturning Lathes; Copy Lathes (Electronic); Copy Lathes (Hydraulic) *; Sanders: Single-Belt; Wide-Belt; Speed; Pad; Disc; Edge & Profile; Routers *; Borers; Multi-Borers; Edgebanders *; Dovetailers *; Feed Units; Dust Extraction Systems . METALWORKING MACHINERY Lathes ; Milling Machines ; Pedestal Drills; Surface Grinders ; Band Saws ; Power Hacksaws; Polishers; Shapers; Deburring Machines; Guillotines *; Metalworkers *; Power Presses *. AGRICULTURAL & HORTICULTURAL MACHINERY Produce Conveyors; Grading Equipment ; Rolling Mill/Mixing Equipment; Potting Machinery. MISCELLANEOUS APPLICATIONS Printing Presses ; Guillotines (Paper/Card) *; Cutting Presses *; Wine Presses *; Looms & Weaving Machinery *; Pugmills; Shoe Repair Machinery *; Window Making Machinery; Glass & uPVC Cutting Machinery; Masonry Saws; Food Processing EquipmentLead Time: 10 Days£1,045.00£1,254.00
22kw / 30hp Rotary phase convertor - Max Single motor load 15kW/20.0hp Our TRANSWAVE single to three phase converter provides an artificial means by which a 3 phase motor can be operated from a single-phase supply thereby offering a cost-effective solution to this dilemma. In most instances, no modification to the machine is necessary. The Rotary Converter is particularly suited to the multi-motor, multi-operator environment. Multi-motor applications can be accommodated up to the maximum loading of the converter provided that the specified maximum single motor load is not exceeded. The Rotary Converter is often operated in conjunction with machine tools, however it is also suitable for applications where equipment has a heavy starting load or is subjected to an abnormal surge current. Vehicle Hoists, Compressors, Pumps and Extractor Fans fall into this latter category. It should be noted that converters are designed for applications with a cyclic duty. Please seek advice for continuous duty applications.Lead Time: 10 Days£3,438.00£4,125.60
MSR rotary phase convertor 3hp - Our TRANSWAVE Converter provides an artificial means by which a 3 phase motor can be operated from a single-phase supply thereby offering a cost-effective solution to this dilemma. In most instances, no modification to the machine is necessary. The Rotary Converter is particularly suited to the multi-motor, multi-operator environment. Multi-motor applications can be accommodated up to the maximum loading of the converter provided that the specified maximum single motor load is not exceeded. The Rotary Converter is often operated in conjunction with machine tools, however it is also suitable for applications where equipment has a heavy starting load or is subjected to an abnormal surge current. Vehicle Hoists, Compressors, Pumps and Extractor Fans fall into this latter category. It should be noted that converters are designed for applications with a cyclic duty. Please seek advice for continuous duty applications. Technical Spefication: Maximum single motor load: 1.5kw/2hp Maximum load multi motor : 2.2kw/3hp Dimensions: Height: 350mm Width: 510mm Depth: 350mm Weight: 44kg Fuse or circuit breaker: 20amp Cable size 2.5mmIn Stock£936.00£1,123.20
Trend NVRS/2/115V Voltage=115v Plug=16amp Max. load=12amp End of life=See below for Environmental Policy link For UK sale only. . A versatile no volt release switch which main function is the remote switching of power tools such as routers when mounted in a router table. The plug-in no volt release switch can be placed in a convenient position on the table. TriLead Time: 4 Days£96.00£115.20As low as £103.68
Trend NVRS/2/230V/E Voltage=230v Plug=13amp Max. load=12amp End of life=See below for Environmental Policy link . A versatile no volt release switch whose main function is the remote switching of power tools such as routers when mounted in a router table. The plug-in no volt release switch can be placed in a convenient position on the table. TriLead Time: 4 Days£77.00£92.40As low as £83.16
Trend NVRS/2/240V Voltage=240v Plug=13amp Max. load=12amp End of life=See below for Environmental Policy link For UK sale only. . A versatile no volt release switch whose main function is the remote switching of power tools such as routers when mounted in a router table. The plug-in no volt release switch can be placed in a convenient position on the table. TriLead Time: 4 Days£80.00£96.00As low as £86.40
