Heavy-duty polythene dust extractor bags sized for small mobile extraction units, including the Itech DC001K, DC001S, and P&J Mini Mobile. Manufactured at 130 micron thickness, these bags offer robust, re-useable performance in workshop environments where cost-per-use matters. Supplied in packs of 25.
Applications: dust extraction, mobile extractor maintenance, workshop dust management
Key Features:
— 130 micron polythene construction — sufficient wall thickness to withstand repeated use without splitting under normal extraction pressures
— 1,524 mm circumference / 762 mm layflat — correct fitment for small mobile extractor bodies without adaptation
— 1,067 mm length — adequate capacity for extended use between bag changes
— Re-useable design — reduces consumable costs compared with single-use paper or non-woven alternatives
— Compatible with Itech DC001K, DC001S, and P&J Mini Mobile — confirmed fitment removes guesswork when ordering replacement bags
— Pack of 25 — convenient bulk quantity for workshops running multiple extractors or high-volume production
Manufactured specifically for the iTECH ABS3000 and ABS5000 mobile dust extractors, these heavy-duty polythene bags are built for repeated use in continuous workshop extraction environments. At 130 micron wall thickness, they resist splitting under the sustained demands of high-volume dust collection.
A single bag specification covers both extractor models, sharing a layflat width of 820 mm and circumference of 1640 mm. Bag length varies by model — 1015 mm for the ABS3000 and 1250 mm for the ABS5000 — ensuring correct seating and reliable dust retention in each unit.
Supplied in boxes of 25, they offer a practical bulk-stock solution for workshops running either or both extractors.
Applications: dust and shaving collection
Key Features:
— 130 micron polythene construction — provides the wall thickness necessary for heavy-duty use and repeated emptying without risk of splitting
— Dual-model compatibility — ABS3000 and ABS5000 — a single consumable specification covers both extractors, simplifying procurement and reducing stockholding complexity
— ABS3000 bag length 1015 mm — correctly dimensioned for proper seating and dust retention within the ABS3000
— ABS5000 bag length 1250 mm — correctly dimensioned for proper seating and dust retention within the ABS5000
— Layflat width 820 mm / circumference 1640 mm — consistent dimensional specification across both variants ensures reliable, repeatable installation
— Re-usable designation — reduces consumable waste and ongoing replacement cost in high-volume extraction operations
— Supplied in boxes of 25 — supports efficient bulk stocking for workshops running continuous dust extraction
Replacement STK collection bags designed for use with iTECH and Saftek STK extractors. Supplied in boxes of 20, each bag measures 730 × 1290 × 1290 mm, ensuring a direct, correctly sized fit for compatible extraction units.
Applications: dust extraction, shaving collection, workshop extraction
Key Features:
— OEM-matched dimensions (730 × 1290 × 1290 mm) — ensures a secure, correctly sized fit for iTECH and Saftek STK extractors without modification
— Supplied in boxes of 20 — reduces reorder frequency and keeps replacement stock readily to hand
— Extractor-specific design — maintains extraction efficiency by matching the original bag specification
— Direct replacement part — eliminates the need to source generic alternatives that may compromise fit or filtration
— Compatible with iTECH and Saftek STK extractor range — simplifies procurement for workshops running either brand
Replacement collection bags sized to fit the ITSTFALCO dust bin unit. Dimensions are 97 × 130 cm.
Key Features:
— Designed for ITSTFALCO bin — confirmed compatibility with the correct dust extraction unit
— 97 × 130 cm dimensions — precise sizing ensures a secure fit without improvised adaptation
— Spare stock item — allows workshops to maintain continuous extraction without downtime whilst bags are replaced
Replacement dust bags made specifically for itech STK series extractors. Supplied in bulk quantities of 30 per box, each bag measures 730 × 1290 × 1290 mm to ensure a correct, secure fit without modification.
Applications: dust extraction, workshop dust collection
Key Features:
— itech STK extractor compatibility — designed to fit the STK series without adaptation or modification
— Heavy-duty construction — suitable for sustained industrial use in production environments
— 730 × 1290 × 1290 mm dimensions — precise sizing for a secure, airtight fit
— 30 bags per box — bulk supply reduces reordering frequency in high-usage workshops
— Replacement specification — maintains extractor performance at the level of the original equipment
Heavy-duty polythene dust extractor bags sized for small mobile extraction units, including the Itech DC001K, DC001S, and P&J Mini Mobile. Manufactured at 130 micron thickness, these bags offer robust, re-useable performance in workshop environments where cost-per-use matters. Supplied in packs of 25. Applications: dust extraction, mobile extractor maintenance, workshop dust management Key Features: — 130 micron polythene construction — sufficient wall thickness to withstand repeated use without splitting under normal extraction pressures — 1,524 mm circumference / 762 mm layflat — correct fitment for small mobile extractor bodies without adaptation — 1,067 mm length — adequate capacity for extended use between bag changes — Re-useable design — reduces consumable costs compared with single-use paper or non-woven alternatives — Compatible with Itech DC001K, DC001S, and P&J Mini Mobile — confirmed fitment removes guesswork when ordering replacement bags — Pack of 25 — convenient bulk quantity for workshops running multiple extractors or high-volume productionIn Stock£37.00£44.40As low as £34.63
Manufactured specifically for the iTECH ABS3000 and ABS5000 mobile dust extractors, these heavy-duty polythene bags are built for repeated use in continuous workshop extraction environments. At 130 micron wall thickness, they resist splitting under the sustained demands of high-volume dust collection. A single bag specification covers both extractor models, sharing a layflat width of 820 mm and circumference of 1640 mm. Bag length varies by model — 1015 mm for the ABS3000 and 1250 mm for the ABS5000 — ensuring correct seating and reliable dust retention in each unit. Supplied in boxes of 25, they offer a practical bulk-stock solution for workshops running either or both extractors. Applications: dust and shaving collection Key Features: — 130 micron polythene construction — provides the wall thickness necessary for heavy-duty use and repeated emptying without risk of splitting — Dual-model compatibility — ABS3000 and ABS5000 — a single consumable specification covers both extractors, simplifying procurement and reducing stockholding complexity — ABS3000 bag length 1015 mm — correctly dimensioned for proper seating and dust retention within the ABS3000 — ABS5000 bag length 1250 mm — correctly dimensioned for proper seating and dust retention within the ABS5000 — Layflat width 820 mm / circumference 1640 mm — consistent dimensional specification across both variants ensures reliable, repeatable installation — Re-usable designation — reduces consumable waste and ongoing replacement cost in high-volume extraction operations — Supplied in boxes of 25 — supports efficient bulk stocking for workshops running continuous dust extractionIn Stock
Replacement STK collection bags designed for use with iTECH and Saftek STK extractors. Supplied in boxes of 20, each bag measures 730 × 1290 × 1290 mm, ensuring a direct, correctly sized fit for compatible extraction units. Applications: dust extraction, shaving collection, workshop extraction Key Features: — OEM-matched dimensions (730 × 1290 × 1290 mm) — ensures a secure, correctly sized fit for iTECH and Saftek STK extractors without modification — Supplied in boxes of 20 — reduces reorder frequency and keeps replacement stock readily to hand — Extractor-specific design — maintains extraction efficiency by matching the original bag specification — Direct replacement part — eliminates the need to source generic alternatives that may compromise fit or filtration — Compatible with iTECH and Saftek STK extractor range — simplifies procurement for workshops running either brandIn Stock£65.00£78.00
Replacement collection bags sized to fit the ITSTFALCO dust bin unit. Dimensions are 97 × 130 cm. Key Features: — Designed for ITSTFALCO bin — confirmed compatibility with the correct dust extraction unit — 97 × 130 cm dimensions — precise sizing ensures a secure fit without improvised adaptation — Spare stock item — allows workshops to maintain continuous extraction without downtime whilst bags are replacedIn Stock£45.00£54.00
Replacement dust bags made specifically for itech STK series extractors. Supplied in bulk quantities of 30 per box, each bag measures 730 × 1290 × 1290 mm to ensure a correct, secure fit without modification. Applications: dust extraction, workshop dust collection Key Features: — itech STK extractor compatibility — designed to fit the STK series without adaptation or modification — Heavy-duty construction — suitable for sustained industrial use in production environments — 730 × 1290 × 1290 mm dimensions — precise sizing for a secure, airtight fit — 30 bags per box — bulk supply reduces reordering frequency in high-usage workshops — Replacement specification — maintains extractor performance at the level of the original equipmentIn StockList £108.00£80.00Inc Vat £96.00
