Coating Machines
(24 Products)-
- Useful lenght of the bench 3200 mm (changeable upon request)
- Useful width of the bench 1500 mm (changeable upon request)
- Total lenght of the machine 6000 mm
Lead Time: 60 Days£ Enquire -
- Roll diameter 350 mm
- Lenght of the roll 1350 mm [1500mm Option]
- Motor of the roll 7,5 Kw
Lead Time: 60 Days£ Enquire -
- MAX. DIMENSIONS OF THE WORKING PIECE:
- Lenght 3200 mm
- Width 1350 mm
Lead Time: 60 Days£ Enquire -
- 8 Pcs Airjet Blower with Double Nozlles.
- Anti static brush cleaner for top surface cleaning. Height can be adjusted with the joystick according to the thickness of the workpiece.
- Oscillatory Blowing Bar for cleaning lower surface of the products.
Lead Time: 60 Days£ Enquire -
The KR BM 1000 B is an automatic flat-line spraying machine engineered for small and medium-sized production environments where paint economy and finish quality are both critical. Its polyolefin belt and integrated scraper recovery system reclaim overspray for reuse across all coat layers — not merely as a primer — delivering a verified 30% reduction in paint consumption compared with conventional systems. Belt cleaning requires 90% less solvent than competing machines, reducing both running costs and solvent waste. Product detection is handled by a reader sensor system at the machine infeed. Scanner bars map the shape and dimensions of each panel, restricting paint application precisely to the workpiece and eliminating unnecessary overspray beyond the product boundary. The painting arm carries four high-pressure spray guns and traverses at up to 180 metres per minute. Arm speed is adjusted automatically via the control panel, and gun angle and height are both field-adjustable without tooling. The high-pressure atomisation system breaks paint down to fine micron-level particles, ensuring consistent, even coverage across flat and profiled surfaces. The gun plate assembly is designed for rapid removal, allowing detailed cleaning or gun replacement in minutes rather than hours. Ventilation is managed through a paper filter exhaust system that directs airflow across the cabin in a controlled pattern, extracting paint particles through side-mounted filters and maintaining a clean spray environment throughout the production run. Compatible paint materials include polyurethane, water-based, acrylic, cellulosic, UV-cure, and solvent-based coatings, as well as adhesives and surface colorants — giving the machine genuine versatility across panel finishing applications. Applications: Flat panel doors, door frames, door pulleys, modular furniture, kitchen furniture, bathroom furniture, flat and carved cabinet doors, glass panels Key Features: — Polyolefin belt with scraper paint recovery system — Reclaims overspray for reuse at any coat layer, reducing paint consumption by 30% — 90% reduction in belt-cleaning solvent requirement — Significantly lowers solvent usage and disposal costs compared with conventional flat-line machines — Reader sensor system with scanner bars — Maps product dimensions at the infeed and restricts spray to the workpiece, eliminating overspray waste beyond panel boundaries — Four high-pressure spray guns on a robot arm — Delivers consistent atomisation across the full panel width in a single pass — Painting arm speed up to 180 m/min — Supports high-throughput production without compromising finish quality — Automatic arm speed adjustment via control panel — Allows process parameters to be changed without manual mechanical intervention during production — Adjustable gun angle and height without tooling — Accommodates varying product profiles and coating requirements with minimal changeover time — High-pressure atomisation to fine micron-level particle size — Ensures uniform paint distribution and adhesion across flat and profiled substrates — Rapid-release gun plate system — Enables full gun assembly removal for detailed cleaning or replacement in minutes, minimising unplanned downtime — Paper filter cabin exhaust system — Directs airflow in a controlled pattern across the cabin, extracting paint particles and maintaining a clean spray environment — Compatibility with polyurethane, water-based, acrylic, cellulosic, UV-cure, and solvent-based coatings — Supports a wide range of finishing schedules without machine reconfiguration — Designed for small and medium production volumes — Capital cost and footprint are proportionate to batch-scale operations rather than high-volume line productionLead Time: 60 Days£ Enquire -
- Max. Product Length: Unlimited
- Max. Product Width: 1300 mm
- Max. Product Thickness: 100 mm
Lead Time: 60 Days£ Enquire -
- Dimensions W: 1904 mm L:4200 mm H: 2000 mm
- Weight 1360 kg
- Electric Consumption 7.75 Kw/h
Lead Time: 60 Days£ Enquire -
- Max. Product Length: Unlimited
- Max. Product Width: 1300 mm
- Max. Product Thickness: 100 mm
Lead Time: 60 Days£ Enquire -
KR BM KBOTIC SMART CARTESIAN SPRAYING ROBOT Kbotic which is developed for painting 3D and panel shaped products is a new generation multi-axis painting robot that allows the edges and surface profiles of products to be painted with the same quality as their flat surfaces. Up to 2 cartesian robot arms and 10 spraying guns can be coupled to Kbotic, which can be configured according to any need through its flexible design. Kbotic, which detects the products with Image Processing Technology (kavision), monitors the painted products at the exit with a smart quality control system (SQC) and offers the ideal finishing quality to the user. Kbotic perfects the finishing quality by optimizing the painting parameters with its artificial intelligence technology. PRODUCT SCANNING SYSTEM (SMART CARTESIAN SPRAYING ROBOT) PRODUCT SCANING SYSTEM (Kavision) The patented Kavision unit which detects the products in 3D at the machine enterance is provided as standart. Kavision system detects the width, height and depth measurements of the products at the machine enterance in millimeters and automatically prepares the work order for painting in real time without the need for any CAM data. Thanks to this feature, it reduces operator errors to 0%.Surface painting uniformity of the painted product determined numerically. This data is used to create and additional painting route. ROBOTIC ARM A 4-axis cartesian arm and 2 airmix guns on the arm are provided as standart. In this way, it allows applying both paint and glue with the same machine. Optionally thanks to its wide arm box, it offers rapid change of 3 colors with 2k mix unit. With 4-axis and 5-axis options, gun sets can be quickly changed with an easy lock for painting motive 3D and similar surfaces. CONTROL SYSTEM All control and image processing of the machine is provided via 15""multitech IPS. Kavision and SQC softwares are controlled via this IPS. Images of painted and to-be-painted parts, quality results, daily production data, fault records are stored for up to 50.000 images. It allows remote management and remote control of data. All production data can be tracked online by optional IOT system and it can send daily production reports. PAINT RECOVERY SYSTEM Kbotic can optionally be equipped with a paint recovery system instead of paper conveyor belt which provides paint savings up to %30 in mass production. ASPIRATION AND VENTILATION SYSTEM 18000 mⁿ/s flow rate exhaust fan and accordion cardboard filter are provided as standart in Kbotic. In this way, it quickly removes overspray particles during painting from the environment and ensures that the cabin interior remains clean all times. 6 frequency controlled ventilation fans are provided as standart. In this way, the cabin pressure is constantly kept balanced with pressure sensors and duts is prevented from entering the machine. Filters are EU 5 wax filters. Additionally, filters are monitored with differential pressure switches, it gives warnings when the filter becomes dirty and unusable. AUTOMATIC LUBRICATION SYSTEM This system ensures a smooth and long-lasting operation of the reciprocating arms by automatically lubricating the lineer bearings and guides. ADIDITIONAL ROBOT ARM Kbotic painting robot can be produced with two robotic arms according to need. In this way, the painting speed can be doubled and rapid color transitions can be made by two seperate robot arms. Additionaly, the two arms can work together permanent, it allows high speed painting. Paperbelt, without pump and spray gun: TECHNICAL SPECIFICATIONS (SMART CARTESIAN SPRAYING ROBOT) Kbotic Weight : 11750 Kg. Camera Sliding Conveyor - Weight : 750 Kg. Kbotic Dimensions : L: 6,600 mm, W: 5,100 mm, H: 3,350 mm. Camera Sliding Conveyor - Dimensions : L: 4,100 mm, W: 4,150 mm, H: 2,150 mm. Kbotic Electricity Consumption : 24 kW/h. Camera Sliding Conveyor - Electricity Consumption : 1,5 kW/h. Air Consumption : 1,250 L/ min. (Excluding 80 NL Guns) Air Pressure : 7 bar. Aspiration Flow Rate Maximum : 18,000 mⁿ/h. (Inverter Control) Ventilation Flow : 18,000 mⁿ/h. Working Height(Effective) : 300 mm. Working Width (Effective) : 1,200 mm. Working Length (Std) : 3,100 mm. Working Length (Cont) : Unlimited Linear Painting Speed : 2 m/sec. Conveyor Speed (Maximum) : 8 mt/min. (Inverter Controlled) Various options available on request: OPS RBT GKBK Recovery conveyor OPS RBT K Extra Robot Arm OPS SQC Smart quality control conveyor OPS YBP High Pressure pump (piece) OPS DBP Low Pressure pump (piece) OPS YBT High Pressure paint gun OPS SPN YB Extra set of nozzles & filters for the gun high pressure OPS DBT Low pressure automatic paint gun (piece) OPS SFBOTIC Water filteration for KBoticLead Time: 60 Days£ Enquire -
The KR KUVM 2L addresses one of the most persistent problems in MDF and panel finishing: edge porosity. The soft fibre structure of MDF edges absorbs excess paint, resulting in damaged surfaces, inconsistent quality, and inflated material costs. This machine resolves that by combining pre-sanding, UV coating, and post-sanding in a single, continuous process. Adjustable angle rollers allow UV coating to be applied consistently across straight, radius, and chamfered edges — a capability that distinguishes the KR KUVM 2L from fixed-geometry coaters. Coating weight is applied at 40–80 g/m², immediately cured by UV, and then refined by a second sanding pass. The machine operates at line speeds of 15–20 m/min, with a two-stage, two-unit configuration that accommodates a second coat where paint or varnish characteristics demand it. Edges exit the machine ready for painting in approximately 2–3 minutes. Five belt sanding units with automatically adjustable positions and speeds ensure consistent surface preparation across varying panel types and thicknesses. The pre-sanding stage works in the P180–P220 range, compressing the edge fibre before coating is applied. IoT data logging records machine status, fault history, operator activity, and production volumes in real time. Reports can be filtered by parameter, and configurable alarms allow supervisors to monitor production without direct intervention. Remote technical support is delivered via the Vsight Remote application, enabling voice and video connection between the operator and KAMA's technical team using a smartphone, tablet, or smart glasses — reducing downtime from faults to a matter of seconds. Applications: UV filling of panel edges, UV primer application, edge sanding, MDF edge preparation, chipboard edge coating, pre-paint edge finishing Key Features: — Adjustable angle rollers — Enables consistent UV coating across straight, radius, and chamfered edge profiles without retooling — Two-stage, two-unit coating configuration — Applies two layers of paint or varnish in a single pass, reducing primer consumption where a second coat is required — UV instant curing — Coating dries immediately after application, eliminating drying time and allowing the process to continue without interruption — Line speed of 15–20 m/min — Edges are ready for painting in approximately 2–3 minutes, supporting high-throughput production schedules — Five belt sanding units with auto-adjustable position and speed — Delivers consistent surface quality across varying panel types without manual intervention between jobs — Pre-sanding in the P180–P220 range — Compresses soft MDF edge fibres before coating, reducing paint absorption and the risk of surface cracking — Coating application at 40–80 g/m² — Controlled coat weight minimises paint consumption whilst ensuring adequate edge sealing — Edge porosity management — Sealing the MDF edge before topcoat application reduces over-absorption, cutting material waste and rework — IoT real-time data logging — Records machine status, fault events, operator activity, and production volumes continuously for traceability and process control — Configurable alarm system — Allows supervisors to set threshold-based alerts and monitor production status without continuous manual oversight — Filtered reporting by parameter — Enables targeted analysis of production data, fault patterns, and operator performance across defined time periods — Vsight Remote application integration — Connects the machine operator directly to KAMA's technical team via video call, voice, and live annotation — reducing fault resolution time to secondsLead Time: 60 Days£ Enquire -
- Max. Product Length : Unlimited
- Max. Product Width: 1300 mm
- Max. Product Thickness: 100 mm
Lead Time: 60 Days£ Enquire -
The B2 is constructed for use in large or smaller industries, rendering an efficient and quick surface treatment of work pieces such as wood, metal, glass, and plastics. It is ideal for coating flat objects such as shelves, book case parts, doors, skirting and panels with clear or coloured lacquer. Operation: The speed of the conveyer belts can be adjusted. The pump is lowered into the lacquer-bucket. This pumps the lacquer/paint up to the head. At the bottom of this head, you can adjust the opening and the ""film"" of lacquer falls through to a drain for re-use. When an object passes through this ""curtain"" of lacquer, the object will then be coated with the certain amount of lacquer/paint which you have adjusted. When cleaning the head, you just have to lower it into a solvent bath, and leave it there till next time, that way the head will always stay clean. -A 100% percent efficient but minimum cleaning. The head is lowered in solvent bath. - works with a very small amount of coating. - there is no wastage of lacquer as it is all recycled through the system. - coating is extremely evenLead Time: 60 Days£ Enquire -
Leif & Lorentz 1300mm Single Head Curtain Coater The B2 is constructed for use in large or smaller industries, rendering an efficient and quick surface treatment of work pieces such as wood, metal, glass, and plastics. It is ideal for coating flat objects such as shelves, book case parts, doors, skirting and panels with clear or coloured lacquer. Operation: the speed of the conveyer belts can be adjusted. The pump is lowered into the lacquer-bucket. This pumps the lacquer/paint up to the head. At the bottom of this head, you can adjust the opening and the ""film"" of lacquer falls through to a drain for re-use. When an object passes through this ""curtain"" of lacquer, the object will then be coated with the certain amount of lacquer/paint which you have adjusted. When cleaning the head, you just have to lower it into a solvent bath, and leave it there till next time, that way the head will always stay clean. -A 100% percent efficient but minimum cleaning. The head is lowered in solvent bath. - works with a very small amount of coating. - there is no wastage of lacquer as it is all recycled through the system. - coating is extremely evenLead Time: 60 Days£ Enquire -
- Capacity 350 mm
- Total Length 3000 mm
- Min - Max coating 50 - 350 gm/m3
Lead Time: 60 Days£ Enquire -
The MASTER-FLOOR brushing, rusticating and sending machine has been designed and manufactured as a working centre for parquet and flooring based on the FULL-OPTIONAL concept with a special focus on our most demanding and exigent customers. In fact, thanks to the several innovative technical solutions included Heavy structure in well-sized electrically welded steel consisting of extra-strong tubular structural sections Casing screwed to structure with doors (front and rear) for accessing the inside of the machine Triple-layer rubber belt with honeycomb pattern for better grip. Belt motorisation controlled by gearmotor unit for work speed adjustment Modular brushing heads so as to be able to adapt the machine to different operating and surface-finish needs. 2, 3, 4 or more rusticating heads. Each head is an independent part and has its own brush movement and rotation parts. Possibility of disengaging the heads or the head not needed for the specific job, by means of a fast power control Possibility of fitting brushes of different kinds and grain depending on the wood being worked and the required surface finish Brushes supported both at front and rear. At the front an easily removable double support permits quick brush replacement Fast return of beam with head disengagement and repositioning to measure automatism. Forward and reverse rusticating option. Fine adjustment of the single brushes to offset different degrees of brush wear. During operation, the heads swing backwards and forwards with alternate movement, driving the relevant brushes in order to create a more precise antique effect on the wood, where the grain is highlighted more, creating a natural antique undulated effect, can be equipped with up to 8 units including, hand planned finish, bandsaw finish, structured & woodworm effects.Lead Time: 46 Days£ Enquire -
- Min work-piece length 100 cm
- Min work-piece width 10 cm
- Max work-piece width 30 cm
Lead Time: 46 Days£34,000.00£40,800.00 -
- Maximum workpiece width 20 cm
- Maximum workpiece height 15 cm
- Minimum workpiece length 30 cm
Lead Time: 46 Days£ Enquire -
Top & Bottom Rusticating machine with 4 heads, 2 upper and 2 lower, for beams and planks such as boards and profiles in WPC (Wood-plastic Composites) with maximum width 40 or 60 cm x 20 cm high. The motor-shaft group is integrated by a 45 mm diameter to ensure maximum rigidity with high-speed dynamically balanced brushes to work without vibrations. The machine consists of two independent and separate brushing groups; the first group (steel brush) is used for roughing while the second (silicon carbide brush) is used for finishing.Lead Time: 46 Days£ Enquire -
- valtorta bravorobot p1 dry with paper protective system
- valtorta bravorobot p2 water
- valtorta bravorobot r1 dry
Lead Time: 97 Days£ Enquire -
The Superfici Robot Maestro is inspired by the craftsman's arm movements and transformed into a six-axes anthropomorphic robot with the possibility of extension to eleven. A new quality and efficient automatic spray finishing method for painting windows frames and doors working in conjunction with overhead transport system Advantages: FLEXIBILITY: It's particularly indicated for big panels, especially for windows frames, but can be also applied to stacks and cabinet door finishing. ACCURACY: The robot is equipped with a gun holder tool (7th axis) and supplied with a brushless motor that allows it to spray all parts of the product. Ability to manage the spray angle from 0 ° to 90 ° through software. CLEANING: Exhaust recovery system and brush nozzles cleaning can be set by the software. CONTROL: Direct connection through a remote desktop program displays the operator interface present in the machine and assists in normal work operations such as recipe creation, start-up, and alarm reset.Lead Time: 97 Days£ Enquire -
- belt width 1370 mm.
- roller width 1500 mm.
- working height 900 +/- 20 mm.
Lead Time: 97 Days£ Enquire -
- belt width 1370 mm
- roller width 1500 mm
- working height 900 (±20) mm
Lead Time: 97 Days£ Enquire -
- belt width 1370 mm
- roller width 1500 mm
- working height 900 (±20) mm
Lead Time: 97 Days£ Enquire -
Trivec has an extensive range of machines for pre finishing. Pre finishing comprises one or more combined treatments like texturing, aging and finishing with reactives, stains, oils, hardwax or lacquers. Trivec is not only specialized in turn-key finishing lines, but also in custom built machines, stand alone machines for laboratory purposes and units for integrating into existing machine lines like infrared pre heating panels, polishing units, LED and UV curing equipment. Machine for applying oil / wax: designed for single-sided coating on the surfaces and edges of flat workpieces - the upper side. Applicator is stable. The oil is applied to the rubberized roller. Applicator is designed for application of air-drying oil and a waxy coating for UV oil. Line consists of: 1 - Roller Applicator 2 - 2 x Counter Rotating pads 3 - 2 x Counter Rotating brushes Tehnical specifications Nominal working width : 370 - 670 mm Effective working width: 350 - 650 mm Application roller : ¥ 146 mm Chromed dosing roller : ¥ 123 mm Feed through height min/max.: 5 - 50 mm Feed through speed : 5 - 25 m/min Working height : 900 mm (+30/-30 mm)Lead Time: 30 Days£ Enquire
