CMT Cutter Blocks
(104 Products)
Find the right CMT tool: Browse the 440 Page CMT Orange Tools Catalogue
-
The CMT 800.624.11 bit set is designed specifically for cutting adjustable tongue and groove joints with a bevel profile, eliminating panel rattle in cabinet construction — a common issue with standard cabinet assemblies. The bevel geometry creates a precise mechanical fit between components, ensuring panels seat firmly without play. Suitable for use on table-mounted routers only; these bits are not intended for hand-held power tools. Applications: Cabinet making, plywood veneered panel jointing, tongue and groove joint cutting Key Features: — Adjustable tongue and groove profile — Allows the joint fit to be fine-tuned, accommodating minor variation in panel thickness — Bevel geometry on cutting profile — Eliminates panel rattle by creating a mechanical lock between mating components — Optimised for plywood veneered panels — Produces clean, precise grooves without tearout on veneered surfaces — Table-mounted router application — Ensures controlled, repeatable cuts — not suitable for hand-held use — CMT part no. 800.624.11 — Direct manufacturer part number simplifies reordering and compatibility verificationIn Stock -
The CMT Euro Spindle Moulder Limitor Cutter Head (part no. 693.100.30) is constructed from a light aluminium alloy with high tensile strength, combining rigidity with reduced rotational mass. Limitors are integrated as standard, providing a conformant manual-feed solution built to European standard EN 847-1. Supplied complete with one pair of universal straight knives and limitors in a plastic carry case, the head accepts knives in either 40mm or 50mm heights — ordered separately as no. 690 — with matching limitors available under no. 691. Blank knives are available for custom profile grinding, and over 150 profiled knife sets are held in stock for immediate despatch. Applications: spindle moulding, profile moulding, custom profile work Key Features: — Light aluminium alloy construction — D=100×40×30mm — Reduces rotational mass whilst maintaining the structural rigidity required for consistent cutting performance — Integrated limitors — Limits depth of cut in compliance with EN 847-1 manual-feed safety requirements — EN 847-1 conformance — Meets European normative requirements for manual-feed tooling, supporting workshop compliance obligations — Accepts 40mm or 50mm knife height — Provides versatility across different profile depths without requiring a separate cutter head — Universal straight knives included as standard — Ready to use from delivery for straight moulding operations without additional tooling expenditure — Blank knives available for custom grinding — Allows in-house or trade grinding of bespoke profiles to suit specific section requirements — Over 150 profiled knife sets held in stock — Minimises lead times when changing or specifying profiles across production schedules — Plastic carry case supplied — Protects the head, knives, and limitors during storage and transport between machines or sites — Compatible with all spindle moulder and moulder machines — Integrates with existing workshop equipment without modification or special adaptorsIn StockList £230.40£148.00Inc Vat £177.60 -
The CMT 693.100.31 is a 100 mm Euro Limitor cutter head machined from light aluminium alloy with high tensile strength, designed for use on all types of moulder and spindle moulder. It is supplied complete with a matched pair of universal straight knives and limitors, housed in a protective plastic carry case. The head accepts knives in either 40 mm or 50 mm heights, with compatible knives available under order no. 690 and limitors under order no. 691. Blank knives for custom profile grinding are also available, and a stock of over 150 profiles is held for immediate despatch. The head is built in conformance with European Normative EN 847-1, the applicable safety standard for woodworking tools used on moulding machines. Applications: Moulding, spindle moulding, profile cutting, custom profile grinding Key Features: — 100 mm diameter aluminium alloy body — light tensile-strength construction reduces spindle load whilst maintaining rigidity — Suitable for sustained production use on moulders and spindle moulders — EN 847-1 conformance — built to the European safety standard for woodworking moulding tools — Meets regulatory requirements for professional and industrial use — Integrated limitors — limit depth of cut in the event of knife failure — Provides a critical safety function during manual and automatic feed operation — Accepts 40 mm or 50 mm knife height (order no. 690) — two knife height options from a single head — Increases versatility without requiring a separate cutter head — Automatic knife and limitor positioning pins — engineered registration system for consistent knife setting — Reduces set-up time and minimises the risk of incorrect knife positioning — Over 150 profiles held in stock — broad profile range available for immediate despatch — Minimises lead times for production and jobbing shops — Blank knives available for custom grinding — unground blanks supplied to specification — Enables bespoke profiles to be produced without sourcing alternative tooling — Supplied with plastic carry case — dedicated storage and transport protection included as standard — Protects precision-ground knives and limitors during handling and storageIn StockList £230.40£148.00Inc Vat £177.60 -
The CMT 693 is a 78mm diameter Euro Limitor spindle moulder cutter block with a 30mm bore, supplied complete in a plastic carry case with one set of straight knives and limitors. Manufactured in high tensile strength steel, it is built to EN 847-1 and intended for manual feed operation on moulder and spindle moulder machines. The Euro Limitor system accepts interchangeable knives up to 40mm in width, with over 150 profiles held in stock for immediate despatch alongside blank knives for custom grinding. Positioning pins locate both knives and limitors automatically, ensuring consistent alignment on every reset. This configuration suits workshops running varied moulding profiles who need a single cutter block adaptable to different jobs without compromising on safety compliance or finish quality. Applications: Spindle moulder machines, moulder machines, joinery profiling, cabinet making mouldings, custom knife grinding Key Features: — 78mm cutter diameter, 30mm bore — matches standard spindle moulder and moulder machine specifications — Euro Limitor system — accepts interchangeable straight knives for a wide range of profiles — Over 150 profiles in stock — immediate despatch for common moulding requirements without waiting on custom orders — Knife width up to 40mm (order no. 690) — accommodates larger profile depths within the same cutter block — Blank knives available for custom grinding — enables bespoke profiles to be ground to exact project requirements — High tensile strength steel construction — withstands sustained cutting loads without deformation — Automatic positioning pins — ensures accurate, repeatable alignment of knives and limitors — Supplied with one set of straight knives and limitors — ready for immediate use straight from the case — Manual feed configuration (MAN) — suited to hand-fed spindle moulder operation — Built to EN 847-1 — meets the European safety standard for rotating woodworking tools — Supplied in a plastic carry case — protects the cutter block and knives during storage and transportIn StockList £201.60£130.00Inc Vat £156.00 -
- Diameter 140 mm
- Adjustable Width 4.0 - 15.0mm
- Speed 5500-9500 rpm
Lead Time: 16 DaysList £540.00£347.00Inc Vat £416.40 -
- Diameter 140 mm
- Adjustable Width 4.0 - 15.0mm
- Speed 5500-9500 rpm
Lead Time: 16 DaysList £553.20£355.00Inc Vat £426.00 -
- Diameter 140 mm
- Adjustable Width 4.0 - 15.0mm
- Speed 5500-9500 rpm
Lead Time: 16 DaysList £553.20£355.00Inc Vat £426.00 -
The CMT 694.002.40 is a chamfer cutter head designed for spindle moulders, double-end tenoners, and shaper machines, producing clean, accurate bevels and edge joints across a wide range of materials. The hard aluminium alloy body is engineered for high resistance to both tensile and yield stress, ensuring dimensional stability under repeated use. Two HWM knives are held with automatic positioning pins, eliminating guesswork during knife changes and maintaining consistent cutting geometry. Supplied in a solid plastic storage box with spare parts readily available from CMT. Applications: Chamfering, bevel cutting, edge jointing, solid wood machining, veneered panel machining, plastic-coated board machining Key Features: — CMT part number 694.002.40 — straightforward reordering and compatibility confirmation with CMT tooling systems — Hard aluminium alloy body — high resistance to tensile and yield stress, maintaining accuracy under load — 2 HWM knives, 50 x 12 x 1.5 mm [Z2] — proven cutting geometry for clean chamfers and edge joints — Automatic knife positioning pins — repeatable knife setting without manual measurement, reducing setup time and error — Manual feed rating (MAN) — matched to hand-fed spindle moulder and shaper applications — Compatible with spindle moulders, double-end tenoners, and shapers — broad machine compatibility across a typical joinery or panel shop — Suitable for solid wood, veneered, panel, and plastic-coated materials — versatile across common production materials without tool changes — Supplied in a solid plastic storage box — organised, protected storage between production runs — Spare parts stocked — knives, wedge, and screws available separately — straightforward maintenance with no need to replace the entire headLead Time: 16 DaysList £277.20£178.00Inc Vat £213.60 -
- - Hard aluminium alloy body with high resistance to tensile and yield stress
- - 2 HWM knives 49,6x11,9x1,5mm [Z2]
- - Tools for manual feed MAN
Lead Time: 16 DaysList £267.60£172.00Inc Vat £206.40 -
- - Hard aluminium alloy body with high resistance to tensile and yield stress
- - 2 HWM knives 49,6x11,9x1,5mm [Z2]
- - Tools for manual feed MAN
Lead Time: 16 DaysList £267.60£172.00Inc Vat £206.40 -
- - Hard aluminium alloy body with high resistance to tensile and yield stress
- - 2 HWM knives 49,6x11,9x1,5mm [Z2]
- - Tools for manual feed MAN
Lead Time: 16 DaysList £267.60£172.00Inc Vat £206.40 -
- - Hard aluminium alloy body with high resistance to tensile and yield stress
- - 2 HWM knives 40x18x2mm [Z2]
- - Tools for manual feed MAN
Lead Time: 16 DaysList £322.80£207.00Inc Vat £248.40 -
The CMT 694.009.40 Reverse Glue Joint Cutter Block is designed to produce structurally superior glue joints in a single, repeatable operation. The cutter head is centred precisely to the workpiece so that the upper and lower vertical cutting edges remove equal proportions of material from each face. The process is straightforward: machine one face of the panel, invert it, then machine the opposite face. The resulting reverse cuts are geometrically matched, producing tight, self-aligning joints that require no further adjustment. The block performs reliably across solid wood, coated sheet materials, and uncoated man-made boards, making it suited to panel, door, and furniture production where joint integrity is critical. Applications: wide panel gluing, door construction, furniture panel jointing, solid wood jointing, coated and uncoated board jointing Key Features: — Reverse glue joint geometry — upper and lower cutting edges work in opposition, producing self-aligning joints that interlock mechanically for exceptional strength — Centred cutter head design — ensures equal material removal from each face of the panel, eliminating mismatched joint profiles — Two-pass operation — machine one face, invert the panel, machine the opposite face — no additional tooling or setup required between passes — CMT part no. 694.009.40 — direct manufacturer part number ensures exact replacement and compatibility with CMT tooling systems — Compatible with solid wood — cuts cleanly across grain without tear-out, suitable for hardwood and softwood panel gluing — Compatible with coated and uncoated man-made boards — performs consistently on MDF, chipboard, and melamine-faced sheet materials without profile degradation — Flawless joint alignment — geometrically matched reverse cuts close without gaps, reducing the need for clamping correction or post-glue machining — Suited to wide panel and door construction — cutter head capacity accommodates the board dimensions typical in door, furniture, and shopfitting panel workLead Time: 16 DaysList £322.80£207.00Inc Vat £248.40 -
- </span>
- Diameter D= 160 mm
- Bore d= 40 mm
Lead Time: 16 DaysList £350.40£225.00Inc Vat £270.00 -
- - Hard aluminium alloy body with high resistance
- to tensile and yield stress.
- - 2 HWM Knives type (A) 50x25x2mm [Z2].
Lead Time: 16 DaysList £373.20£240.00Inc Vat £288.00 -
CMT part no:694.013.40 We offer the traditional approach to panel construction with these CMT raised panel cutter heads. Make classic raised panels on furniture, interior and cabinet doors on solid wood and wooden boards, and achieve three different profiles by adjusting the cutting depth.We recommend multiple passes for safe and accurate finishing. For use on spindle moulders. Perfect on all materials, but ideal on solid wood and panels. Technical details: - Hard aluminium alloy body with high resistance to tensile and yield stress - 2 HWM Knives type (A) 19,8x11,9x1,5mm [Z2] - 2 HWM Knives type (B) 60x11,9x1,5mm [Z2] - Tools for manual feed MAN - Pins for the automatic positioning of the knives Supplied in a solid plastic box Spare parts: CM695013A1 pair knives profile A CM695013A2 pair knives profile B CM69599953 wedge CM99006600 screw CM99108300 alan keyLead Time: 16 DaysList £408.00£248.00Inc Vat £297.60 -
The CMT 694.014.30 is a twin-head spindle moulder cutter block engineered for producing matched furniture door and drawer profiles in a single setup. By adjusting the head height between passes, operators cut both the tongue and groove profiles without repositioning the fence or changing tooling — reducing setup time and the risk of misalignment. The block accepts HWM profile knives in four interchangeable profiles (A through D), each measuring 40 × 24.5 × 2 mm, making the same body serviceable across multiple door and drawer styles. Suitable for hardwood and panel stock between 22 mm and 25 mm thick, the cutter is rated for manual feed operation. The body is machined from hard aluminium alloy with high resistance to both tensile and yield stress. Spare knives, wedges, and fixings are available separately by CMT part number. Supplied in a solid plastic storage box. Applications: furniture door and drawer profiling, spindle moulding, matched profile cutting Key Features: — Twin-head configuration — cuts matched tongue and groove profiles in a single setup without fence repositioning or tool changes between passes — Adjustable head height — controls which profile is cut, enabling both passes from one mounted tool — Four interchangeable HWM knife profiles (A–D) — the same cutter body is reused across different door and drawer styles, reducing tooling investment — HWM profile knives — 40 × 24.5 × 2 mm [Z2] — standardised knife geometry simplifies sourcing and replacement — Automatic knife-positioning pins — ensures consistent knife seating and repeatable cutting geometry on every setup — Hard aluminium alloy body — high resistance to tensile and yield stress extends service life under production loading — Rated for manual feed (MAN) — suited to controlled hand-fed spindle moulder operation — Compatible with hardwood and panel stock 22–25 mm thick — covers the material range typical of furniture carcass and door construction — Spare knives available by CMT part number (CM695014A–D) — replacement knives for all four profiles are individually orderable, avoiding full tooling replacement — Supplied in a solid plastic storage box — protects the cutter body and knives during storage and transportIn StockList £331.20£213.00Inc Vat £255.60 -
CMT part no:694.014.31 These spindle moulder cutter blocks are made combining two cutter heads, ideal for making furniture doors and drawers. By adjusting the height of the head it is possible to cut two perfectly fitting profiles with no waste of time or efforts to move the fence or to replace the tool. Save money by purchasing one single head and improve your production's efficiency. For use on spindle moulders. Perfect on hardwood and panels with thickness between 22mm and 25mm. Technical details: - Hard aluminium alloy body with high resistance to tensile and yield stress - 2 HWM Knives type (Profile A) 40x24,5x2mm [Z2] - Tools for manual feed MAN - Pins for the automatic positioning of the knives Supplied in a solid plastic box Spare parts: CM695014A pair knives profile A CM695014B pair knives profile B CM695014C pair knives profile C CM695014D pair knives profile D CM69599939 wedge CM99006600 screw CM99106700 alan keyIn StockList £331.20£213.00Inc Vat £255.60 -
CMT part no:694.014.35 These are unique products made by combining two cutter heads, ideal for making furniture doors and drawers. By adjusting the height of the head it is possible to cut two perfectly fitting profiles with no waste of time or efforts to move the fence or to replace the tool. Save money by purchasing one single head and improve your production's efficiency. For use on spindle moulders. Perfect on hardwood and panels with thickness between 22mm and 25mm. Technical details: - Hard aluminium alloy body with high resistance to tensile and yield stress - 2 HWM Knives type (Profile A) 40x24,5x2mm [Z2] - Tools for manual feed MAN - Pins for the automatic positioning of the knives Supplied in a solid plastic box Spare tips : CM695014ALead Time: 16 DaysList £331.20£213.00Inc Vat £255.60 -
The CMT 694.015.30 is a multi-profile spindle moulder cutter set designed for the production of furniture components and doors in both softwood and hardwood. Its principal advantage is the ability to accept five interchangeable knife profiles within a single set of cutter heads, covering the most widely used classical moulding profiles without requiring separate tooling for each operation. The set comprises three cutter heads: two with hard aluminium alloy bodies engineered for high tensile and yield stress resistance, and a third with a super-strength steel body. Each head accommodates HWM-tipped knives, with automatic positioning pins ensuring repeatable knife registration on every setup. The adjustable cutter head can be used independently for grooving operations, accepting groove widths from 8mm to 15mm by means of the supplied spacer ring sets. Maximum workpiece thickness is 48mm across all heads. Spare knives are available individually by profile designation (A through E, in both A1 and A2 series), and replacement tips, fixings, and keys are all listed by CMT part number for straightforward reordering. Applications: furniture component production, door making, classical moulding profiles, grooving Key Features: — Five interchangeable knife profiles — covers the most common classical moulding profiles within a single tooling set, reducing the need for separate cutter purchases — Three cutter heads included (heads 1, 2, and 3) — provides dedicated tooling configurations suited to different profile and grooving operations within one set — Hard aluminium alloy bodies on heads 1 and 2 — high resistance to tensile and yield stress, reducing deformation under cutting loads — Super-strength steel body on head 3 — increased robustness for demanding grooving and profile work — HWM-tipped knives throughout — hard metal tipping maintains edge life on both solid wood and composite panels — Automatic knife positioning pins — ensures repeatable and accurate knife registration on every knife change, reducing setup time and error — Adjustable cutter head for grooving (8mm–15mm) — can be used independently for groove cutting, adjustable via spacer rings without additional tooling — Spacer ring sets supplied for all three heads — 12 rings per head (0.1mm to 3mm for heads 1 and 2; 0.1mm to 2mm for head 3) allow precise width adjustment — Maximum workpiece thickness 48mm — accommodates standard furniture panel and door stile thicknesses without modification — Rated for manual feed (MAN) use — appropriate tooling classification for hand-fed spindle moulder operation in compliance with safety requirements — Full spare parts programme with individual CMT part numbers — knives in five profile designations (A–E, A1 and A2 series), tips, screws, Allen key, T20 and T25 Torx keys all available separately for straightforward reordering — Supplied in a solid plastic storage box — protects knives and components between use and keeps the full set organised at the machineIn StockList £883.20£567.00Inc Vat £680.40 -
The CMT 694.015.31 is a multi-profile spindle moulder cutter set engineered for the production of furniture components and doors in both softwood and hardwood. Its defining characteristic is the capacity to accept five interchangeable knife profiles within a single tool body, covering the most widely specified classical and contemporary moulding forms without the need for multiple dedicated heads. The set comprises three cutter heads: two with hard aluminium alloy bodies rated for high tensile and yield stress resistance, and a third with a super-strength steel body. Bore diameter is 31.75mm, and the set accepts material up to 48mm thick. The adjustable cutter head can be used independently to cut grooves from 8mm to 15mm wide, broadening the set's utility beyond profile work. Knife positioning is managed via automatic positioning pins, and spacer ring sets — 12 rings per head, ranging from 0.1mm to 3mm — allow precise profile depth adjustment. The complete set is supplied in a solid plastic storage case with all required assembly tools included. A comprehensive range of spare knives and tips is available separately, covering five profile variants in two orientations (A1 through E1 and A2 through E2), along with replacement tips and fasteners. Applications: furniture component production, door making, classical moulding profiles, groove cutting, spindle moulding on solid wood and panel materials Key Features: — Five interchangeable knife profiles in a single set — covers the most common furniture and door moulding forms without purchasing multiple dedicated cutter heads — Compatible with both softwood and hardwood — suitable for the full range of timber species encountered in joinery and furniture production — Maximum workpiece thickness 48mm — accommodates standard door stile and rail stock without modification — 31.75mm bore diameter — fits the standard spindle moulder arbour size used across the majority of workshop machines — Hard aluminium alloy body on cutter heads 1 and 2 — high resistance to tensile and yield stress reduces deformation under load and extends service life — Super-strength steel body on cutter head 3 — provides additional rigidity and durability for demanding profile or groove cutting operations — Automatic knife positioning pins — ensures repeatable, accurate knife setting each time profiles are changed, reducing setup time and operator error — 24 spacer rings across two head types (0.1mm to 3mm range) — allows fine incremental adjustment of profile depth to match exacting workshop tolerances — Adjustable cutter head operable independently — cuts grooves from 8mm to 15mm wide without requiring a separate dedicated tool — HWM (hard metal tipped) knives throughout — harder wearing than standard HSS tooling, extending edge life on abrasive or resinous timbers — Full spare parts programme with ten profile knife variants — profiles A1 through E1 and A2 through E2 are available individually, keeping the set operational over its full working life — Replacement tips available in three sizes — worn tips can be swapped without replacing the full knife, reducing ongoing tooling costs — Assembly tools included in the set — Allen key, T20 and T25 Torx keys supplied, so the set is ready to use without sourcing additional tooling — Supplied in a solid plastic storage case — protects knives and components between use and keeps spare parts organised in a production environmentIn StockList £883.20£567.00Inc Vat £680.40 -
CMT part no:694.015.40 These versatile sets have been designed to make furniture and doors on soft and hardwood. It allows the insertion of five different knives to produce the most popular and classical profiles. The adjustable cutter, included in the set, can also be used individually to carry out grooves from 8mm 15mm thick. For use on spindle moulders. Perfect on solid wood and panels with maximum 48mm (1-7/8"") in thickness. Technical details: - Hard aluminium alloy body with high resistance to tensile and yield stress for cutter heads (1 & 2); - Super-strength steel body for cutter head (3) - 2 HWM knives type (A1) 25x29,8x2mm [Z2] CM695015A1 - 2 HWM knives type (A2) 25x29,8x2mm [Z2] CM695015A2 - 4 HWM knives 7,65x12x1,5mm [Z4] CM79007600 - 4 HWM knives 14x14x2m for heads type (1 & 2)TA013273 - 12 spacer rings from 0,1 to 3mm for heads type (1 & 2) - 12 spacer rings from 0,1 to 2mm for heads type (3) - Tools for manual feed MAN - Pins for the automatic positioning of the knives Supplied in a solid plastic box Spare parts: CM695015A1 pair knives 25 x 29.8 x 2mm A1 CM695015B1 pair knives 25 x 29.8 x 2mm B1 CM695015C1 pair knives 25 x 29.8 x 2mm C1 CM695015D1 pair knives 25 x 29.8 x 2mm D1 CM695015E1 pair knives 25 x 29.8 x 2mm E1 CM695015A2 pair knives 25 x 29.8 x 2mm A2 CM695015B2 pair knives 25 x 29.8 x 2mm B2 CM695015C2 pair knives 25 x 29.8 x 2mm C2 CM695015D2 pair knives 25 x 29.8 x 2mm D2 CM695015E2 pair knives 25 x 29.8 x 2mm E2 CM79007600 7.65 x 12 x 1.5mm tips (box 10) CM69599907 6.8 x 11 x 9.5mm tips (box 10) TA013273 14 x 14 x 2mm tips (box 10) CM99006600 screw CM99106700 alan key CM99107300 T25 torx key CM99107200 T20 torx keyIn StockList £920.40£591.00Inc Vat £709.20 -
- D = 150
- B = 14-28
- d = 40
Lead Time: 16 DaysList £312.00£201.00Inc Vat £241.20 -
- D = 160
- B = 14-28
- d = 50
Lead Time: 16 DaysList £322.80£207.00Inc Vat £248.40 -
- D = 170
- B = 20-39
- d = 40
Lead Time: 16 DaysList £350.40£225.00Inc Vat £270.00 -
- D = 170
- B = 20-39
- d = 50
Lead Time: 16 DaysList £350.40£225.00Inc Vat £270.00 -
Designed for professional woodworkers producing kitchen doors and frame-and-panel joinery, these seven-piece multiprofile cutter head sets provide everything required to cut horizontal profiles and male-and-female joints in a single coordinated system. The cutter head is machined from hard aluminium alloy and accepts straight knives in either 40mm or 50mm cutting heights, with integrated pins for automatic knife positioning — eliminating the need for manual setting and reducing changeover time. Seven pairs of profiled knives are included alongside their corresponding limiters, all manufactured in compliance with EN 847-1. Both the cutter head and knives are supplied in solid plastic cases to protect the tooling between use. Applications: Kitchen door production, frame-and-panel joinery, horizontal profile moulding, male-and-female joint cutting Key Features: — Seven pairs of profiled knives included — covers a full range of horizontal profile and joint combinations without additional tooling purchases — Hard aluminium alloy cutter head — reduces rotating mass whilst maintaining rigidity and resistance to deformation under load — Accepts 40mm or 50mm cutting height knives — provides compatibility across a range of spindle moulder configurations — Automatic knife positioning pins — eliminates manual setting, reducing changeover time and the risk of misalignment — EN 847-1 compliant safety limiters — meets European safety regulations, ensuring the tooling is approved for professional workshop use — Seven pairs of matching limiters supplied — each knife pair has a dedicated limiter, maintaining correct projection and safe operating geometry — Solid plastic storage cases for head and knives — protects precision-ground tooling from damage, contamination, and corrosion between operations — Male-and-female joint capability — allows accurate interlocking profiles to be cut with matched cutter pairs for consistent assembly fitsIn StockList £444.00£285.00Inc Vat £342.00 -
The CMT 693B series combines a single cutter head with seven interchangeable profile knife pairs, allowing a wide range of jointing, framing, and chamfering operations without the need for multiple dedicated tooling sets. The cutter head is machined from hard aluminium alloy and accepts straight knives, limiters, and positioning pins, with knife insertion at either 40 mm or 50 mm height to suit differing spindle configurations. Each knife pair offers 40 mm of cutting length, and all seven profiles are supplied with their relative safety limiters. The limiters are manufactured in compliance with EU Directive EN 847-1, making this set suitable for use on CE-marked machinery throughout the UK and Europe. The complete set — cutter head, seven knife pairs, and fourteen limiters — is housed in a solid plastic carry case for organised storage and safe transport. Applications: joint making, frame making, chamfering, spindle moulding Key Features: — Seven interchangeable profile knife pairs — covers a broad range of jointing, framing, and chamfering profiles from a single cutter head investment — Hard aluminium alloy cutter head — reduces spindle load whilst maintaining rigidity and dimensional stability under repeated use — Dual knife insertion height — 40 mm or 50 mm — accommodates different spindle moulder configurations without requiring an alternative cutter head — 40 mm cutting length per knife pair — provides adequate depth of cut for standard moulding and jointing profiles — Automatic knife positioning via pins — ensures consistent, repeatable knife setting and reduces changeover time — Seven pairs of relative safety limiters included — each profile is matched to its limiter, eliminating the risk of mismatched tooling — EN 847-1 compliant limiters — meets EU safety directive requirements for use on CE-marked spindle moulders across the UK and Europe — Solid plastic carry case included — protects both cutter head and knife pairs during storage and transit, keeping the set organised and completeIn StockList £444.00£285.00Inc Vat £342.00 -
CMT part no:700.005.03 Containing 6 of CMT's most frequently used 12,7mm shank router bits, this compact Italian hardwood case is beautiful and convenient for your woodworking needs. All the bits contained feature the finest steel and carbide, plus CMT's baked-on orange PTFE non-stick coating.In Stock -
CMT's router bit sets bring together a coordinated selection of straight and profile bits, each manufactured from fatigue-proof steel with micrograin carbide cutting edges and finished with CMT's orange non-stick PTFE coating. The coating reduces resin build-up and heat transfer during operation, extending working life between cleans. Bits are supplied in hardwood snap-lock cases for secure bench-side storage and long-term protection. Applications: routing straight profiles, routing decorative profiles, general woodworking Key Features: — Fatigue-proof steel construction — resists the cyclical stresses of intermittent routing, reducing the risk of bit failure in sustained use — Micrograin carbide cutting edges — finer grain structure delivers a sharper, longer-lasting edge compared to standard carbide grades — Orange PTFE non-stick coating — minimises resin and pitch adhesion, reducing cleaning frequency and heat build-up at the cutting edge — Mixed straight and profile bit selection — covers a range of common routing tasks without requiring individual bit purchases — Hardwood snap-lock storage cases — protects cutting edges and keeps bits organised and ready for useIn Stock
