A pressed, concentric reducer designed for dust extraction installations where space is limited. The female coupling delivers a short installation length whilst maintaining low pressure drop and minimal internal noise generation. The 80/315 variant can be ordered with click function at the female end upon request.
Applications: dust extraction systems, ducting installations
Key Features:
— Pressed concentric construction — consistent bore alignment reduces turbulence and pressure loss through the transition
— Female coupling at one end — short installation length suits confined duct runs
— Low pressure drop design — maintains airflow efficiency across the reduction
— Low internal noise generation — reduces transmitted noise in workshop ducting systems
— Click function at safe end — secure, tool-free connection that resists accidental disconnection
— Open turned-over end opposite — allows the fitting to sleeve over an adjacent fitting for flexible assembly
— Optional click function on female end (80/315 only) — notched female end available to order for positive retention in both directions
dust extraction accessory 125-100mm Fabricated Reducer with Seal
Pressed, concentric reducer with female coupling to meet demands for short installation length with low pressure drop and low internal noise generation. ¥d fits outside another fitting.
Has Click function at the Safe end has an open turned-over end.
Has normally not any Click function at the female end hasn't any notches.
¥ 80/315 can upon order be delivered with click function at the female end as well i.e. with notches.
A pressed, concentric reducer designed for dust extraction systems where installation space is limited. The female coupling delivers a short installation length alongside low pressure drop and minimal internal noise — practical advantages in ducting runs where flow efficiency matters.
The 125–100mm reducer features a Click function at the safe end with an open turned-over collar, whilst the female end is supplied without notches as standard. The 80/315 variant is available to order with a Click function at the female end.
Applications: dust extraction ducting, workshop extraction systems
Key Features:
— Pressed concentric reducer — consistent bore alignment reduces turbulence and maintains airflow efficiency through the transition
— 125–100mm diameter reduction — suits standard ducting configurations without the need for adaptor fittings
— Female coupling with short installation length — fits into confined ducting runs where space between fittings is restricted
— Low pressure drop design — minimises resistance in the extraction circuit, preserving system suction performance
— Click function at safe end — secure, tool-free connection that resists accidental disconnection
— Female end supplied without notches as standard — smooth bore at the female end reduces snagging and simplifies installation
— 80/315 variant available with Click function at female end — both ends can be secured for applications requiring a fully locked ducting joint
A pressed, concentric reducer designed for dust extraction installations where space is constrained. The female coupling delivers a short installation length whilst maintaining low pressure drop and minimal internal noise. The 80/315 variant can be ordered with click function at the female end upon request.
Applications: dust extraction systems, ducting installations
Key Features:
— Pressed concentric construction — consistent bore alignment reduces turbulence and internal noise generation
— Female coupling with click function at the safe end — secure, tool-free connection that resists accidental disconnection
— Open turned-over end — accommodates fitting over an existing pipe or connector without additional adaptors
— Low pressure drop geometry — maintains extraction efficiency across the reduction in diameter
— Optional click function at female end on 80/315 variant — available to order with notches for positive retention where the installation requires it
A pressed, concentric reducer designed for dust extraction installations where installation depth is limited. The female coupling delivers a low pressure drop and minimal internal noise — both critical where long duct runs or high-velocity extraction are in use. The outer diameter fits over adjacent fittings, simplifying integration into existing pipework. The 80/315 size can be ordered with a click function at the female end for applications requiring a fully secured connection at both ends.
Applications: dust extraction, ducting installation, workshop ventilation
Key Features:
— 150mm to 100mm concentric reduction — maintains airflow alignment and minimises turbulence through the transition
— Pressed steel construction with seal — ensures an airtight joint and consistent performance under sustained extraction pressure
— Female coupling with low pressure drop geometry — reduces energy loss across the reducer, supporting efficient extraction system performance
— Short installation length — suits confined duct runs where a full-length reducer would not fit
— Click function at the safe end — provides a positive, audible lock that confirms secure engagement during installation
— Open turned-over end at the female side — allows straightforward push-fit connection without requiring notched fittings on that side
— Optional click function at the female end on 80/315 size — available to order where a secured double-click connection is required at both ends
A pressed, concentric reducer designed for installations where space is constrained and pressure loss must be minimised. The 150–125mm configuration accepts a female coupling at one end, with the outer diameter dimensioned to fit over adjacent fittings. Internal geometry is optimised to reduce turbulence and keep noise levels low in the duct run. The safe end incorporates a Click-lock function as standard; the female end is supplied without notches unless the 80/315 variant is specified with the optional Click function.
Applications: dust extraction ducting, extraction system installation
Key Features:
— Pressed concentric construction — maintains consistent airflow geometry, reducing pressure drop across the reduction
— 150–125mm bore reduction — suits standard extraction ducting transitions between differing pipe diameters
— Female coupling at one end — outer diameter fits over adjacent fittings, enabling compact in-line installation
— Short installation length — suits tight duct runs where space between fittings is limited
— Click-lock function at safe end — secure, tool-free connection that resists accidental disconnection
— Female end supplied without notches as standard — smooth bore retained where a fixed rather than snap-fit joint is required
— Optional Click function on 80/315 female end — allows snap-fit connection at both ends where the installation demands it
A pressed, concentric reducer designed for dust extraction installations where space is limited. The female coupling delivers a short installation length whilst maintaining low pressure drop and minimal internal noise generation. The 80/315 size is available on request with click function at the female end.
Applications: dust extraction pipework, workshop dust extraction systems
Key Features:
— Pressed concentric construction — consistent geometry and reliable sealing across the reduction joint
— 200mm to 100mm reduction — connects differing duct diameters within a single compact fitting
— Female coupling with seal — secure, low-leakage connection without additional sealing materials
— Click function at safe end — positive engagement confirms correct installation and resists accidental disconnection
— Open turned-over end — accepts standard push-fit connections without modification
— Low pressure drop profile — maintains extraction efficiency across the diameter change
— 80/315 click function option — female-end notches available on request where positive retention is required at both ends
A pressed, concentric reducer designed for dust extraction systems where installation space is limited. The 200–125mm reduction is achieved with a short face-to-face length whilst maintaining a low pressure drop and minimal internal noise generation. The female coupling end fits outside an adjoining fitting, simplifying connection within confined ductwork runs. The safe end incorporates a click-lock function as standard; the female end is supplied without notches, though the 80/315 size can be ordered with a click function at the female end upon request.
Applications: dust extraction ducting, workshop extraction systems, ductwork installation
Key Features:
— Pressed concentric construction — consistent concentricity across the reduction, supporting balanced airflow and reduced turbulence
— 200–125mm reduction in a short face-to-face length — suits installations where space between fittings is restricted
— Low pressure drop design — preserves extraction efficiency across the ductwork system
— Low internal noise generation — reduces airborne noise transmission through the ducting
— Female coupling fits outside adjoining fitting — straightforward connection without additional adaptors
— Click-lock function at the safe end — secure, tool-free assembly that resists accidental disconnection
— Optional click function at the female end (80/315 size) — allows positive locking at both ends where the installation demands it
A pressed, concentric reducer designed for dust extraction systems where installation space is limited. The 200–150mm reduction is achieved with minimal pressure drop and low internal noise generation, making it suitable for runs where airflow efficiency is critical.
The female coupling end accepts an outside fit over adjacent fittings, keeping the installed length short. The safe end incorporates a click-lock function as standard; the female end is supplied without notches unless the click function is specified at the time of order.
Applications: dust extraction pipework, extraction system installation
Key Features:
— Pressed concentric reducer — maintains consistent airflow geometry, reducing turbulence and pressure loss across the reduction
— 200–150mm bore reduction — bridges common duct sizes within a single compact fitting
— Low pressure drop design — preserves system suction performance without requiring a larger fan or motor
— Low internal noise generation — reduces airborne noise transmission through the ductwork run
— Click-lock function at safe end — secure, tool-free connection that resists accidental disconnection
— Female end without notches as standard — smooth coupling for installations where click-lock retention is not required
— Optional click function at female end (80/315) — available to order with notches for locking retention at both ends where the installation demands it
A pressed, concentric reducer designed for dust extraction systems where installation space is limited. The 250–200mm reduction is achieved with a short overall length whilst maintaining low pressure drop and minimal internal noise generation. The female coupling fits outside an adjoining fitting, ensuring a secure, flush connection. The safe end incorporates a click function for positive retention; the female end is supplied without notches as standard, though the 80/315 variant can be ordered with a click function at the female end upon request.
Applications: dust extraction systems, ducting installations
Key Features:
— Pressed concentric reducer — 250 to 200mm — provides a clean, symmetrical reduction in duct diameter without turbulence-inducing offsets
— Short installation length — suits confined plant rooms and tight duct runs where space between fittings is restricted
— Low pressure drop geometry — minimises resistance across the reduction, preserving extraction system efficiency
— Low internal noise generation — reduces airborne noise transmitted through the ducting system
— Female coupling fits outside adjoining fitting — ensures a flush, secure joint without requiring additional adaptors
— Click function at the safe end — provides positive, audible retention to prevent unintentional disconnection
— Optional click function at female end (80/315 variant, on request) — allows positive locking at both ends where the installation demands it
dust extraction accessory 280-250mm Pressed Reducer with Seal
Pressed, concentric reducer with female coupling to meet demands for short installation length with low pressure drop and low internal noise generation. ¥d fits outside another fitting.
Has Click function at the Safe end has an open turned-over end.
Has normally not any Click function at the female end hasn't any notches.
¥ 80/315 can upon order be delivered with click function at the female end as well i.e. with notches.
A pressed, concentric reducer designed for dust extraction installations where space is limited. The female coupling delivers a short installation length whilst maintaining low pressure drop and minimal internal noise generation. The 80/315 variant can be ordered with click function at the female end upon request. Applications: dust extraction systems, ducting installations Key Features: — Pressed concentric construction — consistent bore alignment reduces turbulence and pressure loss through the transition — Female coupling at one end — short installation length suits confined duct runs — Low pressure drop design — maintains airflow efficiency across the reduction — Low internal noise generation — reduces transmitted noise in workshop ducting systems — Click function at safe end — secure, tool-free connection that resists accidental disconnection — Open turned-over end opposite — allows the fitting to sleeve over an adjacent fitting for flexible assembly — Optional click function on female end (80/315 only) — notched female end available to order for positive retention in both directionsIn Stock£12.00£14.40
dust extraction accessory 125-100mm Fabricated Reducer with Seal Pressed, concentric reducer with female coupling to meet demands for short installation length with low pressure drop and low internal noise generation. ¥d fits outside another fitting. Has Click function at the Safe end has an open turned-over end. Has normally not any Click function at the female end hasn't any notches. ¥ 80/315 can upon order be delivered with click function at the female end as well i.e. with notches.Lead Time: 15 Days£23.00£27.60
A pressed, concentric reducer designed for dust extraction systems where installation space is limited. The female coupling delivers a short installation length alongside low pressure drop and minimal internal noise — practical advantages in ducting runs where flow efficiency matters. The 125–100mm reducer features a Click function at the safe end with an open turned-over collar, whilst the female end is supplied without notches as standard. The 80/315 variant is available to order with a Click function at the female end. Applications: dust extraction ducting, workshop extraction systems Key Features: — Pressed concentric reducer — consistent bore alignment reduces turbulence and maintains airflow efficiency through the transition — 125–100mm diameter reduction — suits standard ducting configurations without the need for adaptor fittings — Female coupling with short installation length — fits into confined ducting runs where space between fittings is restricted — Low pressure drop design — minimises resistance in the extraction circuit, preserving system suction performance — Click function at safe end — secure, tool-free connection that resists accidental disconnection — Female end supplied without notches as standard — smooth bore at the female end reduces snagging and simplifies installation — 80/315 variant available with Click function at female end — both ends can be secured for applications requiring a fully locked ducting jointIn Stock£14.00£16.80
A pressed, concentric reducer designed for dust extraction installations where space is constrained. The female coupling delivers a short installation length whilst maintaining low pressure drop and minimal internal noise. The 80/315 variant can be ordered with click function at the female end upon request. Applications: dust extraction systems, ducting installations Key Features: — Pressed concentric construction — consistent bore alignment reduces turbulence and internal noise generation — Female coupling with click function at the safe end — secure, tool-free connection that resists accidental disconnection — Open turned-over end — accommodates fitting over an existing pipe or connector without additional adaptors — Low pressure drop geometry — maintains extraction efficiency across the reduction in diameter — Optional click function at female end on 80/315 variant — available to order with notches for positive retention where the installation requires itLead Time: 15 Days£14.00£16.80
dust extraction accessory 150-125mm Fabricated Reducer with SealLead Time: 15 Days£25.00£30.00
A pressed, concentric reducer designed for dust extraction installations where installation depth is limited. The female coupling delivers a low pressure drop and minimal internal noise — both critical where long duct runs or high-velocity extraction are in use. The outer diameter fits over adjacent fittings, simplifying integration into existing pipework. The 80/315 size can be ordered with a click function at the female end for applications requiring a fully secured connection at both ends. Applications: dust extraction, ducting installation, workshop ventilation Key Features: — 150mm to 100mm concentric reduction — maintains airflow alignment and minimises turbulence through the transition — Pressed steel construction with seal — ensures an airtight joint and consistent performance under sustained extraction pressure — Female coupling with low pressure drop geometry — reduces energy loss across the reducer, supporting efficient extraction system performance — Short installation length — suits confined duct runs where a full-length reducer would not fit — Click function at the safe end — provides a positive, audible lock that confirms secure engagement during installation — Open turned-over end at the female side — allows straightforward push-fit connection without requiring notched fittings on that side — Optional click function at the female end on 80/315 size — available to order where a secured double-click connection is required at both endsIn Stock£15.00£18.00
A pressed, concentric reducer designed for installations where space is constrained and pressure loss must be minimised. The 150–125mm configuration accepts a female coupling at one end, with the outer diameter dimensioned to fit over adjacent fittings. Internal geometry is optimised to reduce turbulence and keep noise levels low in the duct run. The safe end incorporates a Click-lock function as standard; the female end is supplied without notches unless the 80/315 variant is specified with the optional Click function. Applications: dust extraction ducting, extraction system installation Key Features: — Pressed concentric construction — maintains consistent airflow geometry, reducing pressure drop across the reduction — 150–125mm bore reduction — suits standard extraction ducting transitions between differing pipe diameters — Female coupling at one end — outer diameter fits over adjacent fittings, enabling compact in-line installation — Short installation length — suits tight duct runs where space between fittings is limited — Click-lock function at safe end — secure, tool-free connection that resists accidental disconnection — Female end supplied without notches as standard — smooth bore retained where a fixed rather than snap-fit joint is required — Optional Click function on 80/315 female end — allows snap-fit connection at both ends where the installation demands itIn Stock£15.00£18.00
dust extraction accessory 200-100mm Fabricated Reducer with SealLead Time: 15 Days£29.00£34.80
A pressed, concentric reducer designed for dust extraction installations where space is limited. The female coupling delivers a short installation length whilst maintaining low pressure drop and minimal internal noise generation. The 80/315 size is available on request with click function at the female end. Applications: dust extraction pipework, workshop dust extraction systems Key Features: — Pressed concentric construction — consistent geometry and reliable sealing across the reduction joint — 200mm to 100mm reduction — connects differing duct diameters within a single compact fitting — Female coupling with seal — secure, low-leakage connection without additional sealing materials — Click function at safe end — positive engagement confirms correct installation and resists accidental disconnection — Open turned-over end — accepts standard push-fit connections without modification — Low pressure drop profile — maintains extraction efficiency across the diameter change — 80/315 click function option — female-end notches available on request where positive retention is required at both endsIn Stock£20.00£24.00
dust extraction accessory 200-125mm Fabricated Reducer with SealLead Time: 15 Days£31.00£37.20
A pressed, concentric reducer designed for dust extraction systems where installation space is limited. The 200–125mm reduction is achieved with a short face-to-face length whilst maintaining a low pressure drop and minimal internal noise generation. The female coupling end fits outside an adjoining fitting, simplifying connection within confined ductwork runs. The safe end incorporates a click-lock function as standard; the female end is supplied without notches, though the 80/315 size can be ordered with a click function at the female end upon request. Applications: dust extraction ducting, workshop extraction systems, ductwork installation Key Features: — Pressed concentric construction — consistent concentricity across the reduction, supporting balanced airflow and reduced turbulence — 200–125mm reduction in a short face-to-face length — suits installations where space between fittings is restricted — Low pressure drop design — preserves extraction efficiency across the ductwork system — Low internal noise generation — reduces airborne noise transmission through the ducting — Female coupling fits outside adjoining fitting — straightforward connection without additional adaptors — Click-lock function at the safe end — secure, tool-free assembly that resists accidental disconnection — Optional click function at the female end (80/315 size) — allows positive locking at both ends where the installation demands itIn Stock£25.00£30.00
A pressed, concentric reducer designed for dust extraction systems where installation space is limited. The 200–150mm reduction is achieved with minimal pressure drop and low internal noise generation, making it suitable for runs where airflow efficiency is critical. The female coupling end accepts an outside fit over adjacent fittings, keeping the installed length short. The safe end incorporates a click-lock function as standard; the female end is supplied without notches unless the click function is specified at the time of order. Applications: dust extraction pipework, extraction system installation Key Features: — Pressed concentric reducer — maintains consistent airflow geometry, reducing turbulence and pressure loss across the reduction — 200–150mm bore reduction — bridges common duct sizes within a single compact fitting — Low pressure drop design — preserves system suction performance without requiring a larger fan or motor — Low internal noise generation — reduces airborne noise transmission through the ductwork run — Click-lock function at safe end — secure, tool-free connection that resists accidental disconnection — Female end without notches as standard — smooth coupling for installations where click-lock retention is not required — Optional click function at female end (80/315) — available to order with notches for locking retention at both ends where the installation demands itIn Stock£18.00£21.60
dust extraction accessory 250-125mm Fabricated Reducer with SealLead Time: 15 Days£24.00£28.80
Dust extraction accessory 250-125mm Pressed Reducer with SealLead Time: 10 Days£17.00£20.40
dust extraction accessory 250-200mm Fabricated Reducer with SealLead Time: 15 Days£25.00£30.00
A pressed, concentric reducer designed for dust extraction systems where installation space is limited. The 250–200mm reduction is achieved with a short overall length whilst maintaining low pressure drop and minimal internal noise generation. The female coupling fits outside an adjoining fitting, ensuring a secure, flush connection. The safe end incorporates a click function for positive retention; the female end is supplied without notches as standard, though the 80/315 variant can be ordered with a click function at the female end upon request. Applications: dust extraction systems, ducting installations Key Features: — Pressed concentric reducer — 250 to 200mm — provides a clean, symmetrical reduction in duct diameter without turbulence-inducing offsets — Short installation length — suits confined plant rooms and tight duct runs where space between fittings is restricted — Low pressure drop geometry — minimises resistance across the reduction, preserving extraction system efficiency — Low internal noise generation — reduces airborne noise transmitted through the ducting system — Female coupling fits outside adjoining fitting — ensures a flush, secure joint without requiring additional adaptors — Click function at the safe end — provides positive, audible retention to prevent unintentional disconnection — Optional click function at female end (80/315 variant, on request) — allows positive locking at both ends where the installation demands itLead Time: 15 Days£19.00£22.80
dust extraction accessory 300-125mm Fabricated Reducer with SealLead Time: 15 Days£30.00£36.00
dust extraction accessory 300-150mm Fabricated Reducer with SealLead Time: 15 Days£31.00£37.20
dust extraction accessory 355-200mm Fabricated Reducer with SealLead Time: 15 Days£34.00£40.80
dust extraction accessory 355-250mm Fabricated Reducer with sealLead Time: 15 Days£36.00£43.20
dust extraction accessory 355-300mm Fabricated Reducer with SealLead Time: 15 Days£39.00£46.80
dust extraction accessory 400-355mm Fabricated Reducer with SealLead Time: 15 Days£50.00£60.00
