A direct-fit locking handle designed for use with iTECH and Comatic power feed units. The M12 female thread barrel ensures a secure, tool-free attachment to compatible feed unit mounting points, whilst the 150mm handle length provides sufficient leverage for confident locking and adjustment.
Applications: Power feed unit mounting, feed unit adjustment
Key Features:
— M12 female thread barrel — direct compatibility with iTECH and Comatic power feed unit mounting points
— 150mm handle length — provides adequate leverage for secure locking without over-tightening
— 75mm barrel length — sufficient depth of engagement for a stable, wobble-free fit
— Female aperture design — accepts standard male fixing points on compatible power feed units
— Locking handle construction — allows the feed unit position to be fixed firmly without additional tooling
A replacement foot casting designed specifically for the CoMatic AF32 power feeder, with confirmed compatibility with the Steff 2032. The casting measures 100 x 100mm overall, with a 40mm column diameter and hole centres of approximately 60mm.
Applications: Power feeder mounting, CoMatic AF32 feeder installation, Steff 2032 feeder installation
Key Features:
— 100 x 100mm overall footprint — known dimensions simplify mounting and replacement planning
— 40mm column diameter — direct fit to CoMatic AF32 and Steff 2032 feeder columns without modification
— Hole centres at approximately 60mm — allows accurate pre-drilling and alignment during installation
— CoMatic AF32 compatibility — confirmed OEM-specification replacement reduces downtime when sourcing parts
— Steff 2032 compatibility — cross-compatible with a widely used feeder model, broadening its utility as a spare
The SS130 is a heavy-duty feeder stand designed to mount and position power feeders on spindle moulders, shapers, and table saws. Its extended support column and arm accommodate larger woodworking machines where standard stands fall short.
The vertical and horizontal support columns are constructed from ductile steel and secured via an "L" locking mechanism, allowing the feeder to be fixed in horizontal, vertical, or angled-feeding positions. The horizontal rotation joint incorporates a clutch and memory-lock, enabling rapid cutter changes without losing the set feed angle.
Full adjustment along both axes is controlled through large hand wheels, and the vertical column is secured to the table surface with four bolts. Note: use with AF-type feeders requires the ITCOSS130KIT adapter kit, supplied separately. The arm is packed separately from the stand.
Applications: spindle moulding, shaping, table saw feeding
Key Features:
— Ductile steel vertical and horizontal columns — robust construction suited to continuous production environments
— "L" locking mechanism — secures the feeder in horizontal, vertical, or angled-feeding positions with confidence
— Extended support column and arm — accommodates larger machines such as shapers and table saws beyond the range of standard stands
— Horizontal rotation clutch and memory-lock — allows quick cutter blade changes whilst retaining the pre-set feed angle
— Large hand wheels on both axes — precise, tool-free repositioning of the feeder horizontally and vertically
— Four-bolt table mounting — stable, positive fixing to the machine table surface under load
— AF-type feeder compatibility via ITCOSS130KIT — extends the stand's compatibility to AF-series feeders when the adapter kit is purchased
— Arm packed separately — facilitates safer transport and handling of the unit
A direct-fit locking handle designed for use with iTECH and Comatic power feed units. The M12 female thread barrel ensures a secure, tool-free attachment to compatible feed unit mounting points, whilst the 150mm handle length provides sufficient leverage for confident locking and adjustment. Applications: Power feed unit mounting, feed unit adjustment Key Features: — M12 female thread barrel — direct compatibility with iTECH and Comatic power feed unit mounting points — 150mm handle length — provides adequate leverage for secure locking without over-tightening — 75mm barrel length — sufficient depth of engagement for a stable, wobble-free fit — Female aperture design — accepts standard male fixing points on compatible power feed units — Locking handle construction — allows the feed unit position to be fixed firmly without additional toolingIn Stock£20.00£24.00
A replacement foot casting designed specifically for the CoMatic AF32 power feeder, with confirmed compatibility with the Steff 2032. The casting measures 100 x 100mm overall, with a 40mm column diameter and hole centres of approximately 60mm. Applications: Power feeder mounting, CoMatic AF32 feeder installation, Steff 2032 feeder installation Key Features: — 100 x 100mm overall footprint — known dimensions simplify mounting and replacement planning — 40mm column diameter — direct fit to CoMatic AF32 and Steff 2032 feeder columns without modification — Hole centres at approximately 60mm — allows accurate pre-drilling and alignment during installation — CoMatic AF32 compatibility — confirmed OEM-specification replacement reduces downtime when sourcing parts — Steff 2032 compatibility — cross-compatible with a widely used feeder model, broadening its utility as a spareIn Stock£48.00£57.60
The SS130 is a heavy-duty feeder stand designed to mount and position power feeders on spindle moulders, shapers, and table saws. Its extended support column and arm accommodate larger woodworking machines where standard stands fall short. The vertical and horizontal support columns are constructed from ductile steel and secured via an "L" locking mechanism, allowing the feeder to be fixed in horizontal, vertical, or angled-feeding positions. The horizontal rotation joint incorporates a clutch and memory-lock, enabling rapid cutter changes without losing the set feed angle. Full adjustment along both axes is controlled through large hand wheels, and the vertical column is secured to the table surface with four bolts. Note: use with AF-type feeders requires the ITCOSS130KIT adapter kit, supplied separately. The arm is packed separately from the stand. Applications: spindle moulding, shaping, table saw feeding Key Features: — Ductile steel vertical and horizontal columns — robust construction suited to continuous production environments — "L" locking mechanism — secures the feeder in horizontal, vertical, or angled-feeding positions with confidence — Extended support column and arm — accommodates larger machines such as shapers and table saws beyond the range of standard stands — Horizontal rotation clutch and memory-lock — allows quick cutter blade changes whilst retaining the pre-set feed angle — Large hand wheels on both axes — precise, tool-free repositioning of the feeder horizontally and vertically — Four-bolt table mounting — stable, positive fixing to the machine table surface under load — AF-type feeder compatibility via ITCOSS130KIT — extends the stand's compatibility to AF-series feeders when the adapter kit is purchased — Arm packed separately — facilitates safer transport and handling of the unitIn StockList £960.00£595.00Inc Vat £714.00
handwheel Assembly For Horionztal Adustment Of Feeder Comprises 80A-1 pinion, 79A-1 handwheel, and 79A-2 locking pinLead Time: 132 Days£30.00£36.00
