Spindle Moulder Accessories
(96 Products)
Spindle Moulder ring fences, guards, jigs, guides & fences allow you to use your spindle moulders more safely. We have 100s of spindle moulder accessories in stock by Aigner, Bessey, CMT, Suva, SCM & CPS as well as our own special guards to make your working practises safer. Whether it's a spindle moulder ring fence, shaw guard or clamping systems that you're after, we have a wide selection to suit Felder, Martin, Panhans, Sedgwick, SCM machines, as well as older models such as Dominion, Robinson or Wadkin branded machinery.
Have a look at our range of Power feeds Units & New Spindle Moulders
Call our spindle moulder sales advice line 01403 273000, or visit our showroom, near London UK.
.
-
The Aigner Cutter Frame is designed for use with the smaller 220 mm capacity BowmouldMaster, mounting directly onto the machine table to provide a stable support platform for workpieces during clamping and profiling operations. Applications: Workpiece support during BowmouldMaster profiling operations Key Features: — 220 mm capacity rating — correctly sized for the smaller BowmouldMaster variant, ensuring a secure and accurate fit — Table-mounted design — positions the frame directly at the working surface, keeping workpieces consistently supported during clamping — Dedicated cutter frame construction — provides rigid workpiece retention, reducing movement and improving cut quality — Aigner manufacture — precision-engineered accessory from a specialist tooling and workholding manufacturer — Compatible with BowmouldMaster table system — integrates without modification, maintaining the machine's existing setup workflowLead Time: 34 Days£83.00£99.60 -
The Aigner Adjustable Mounting Module is a spring-loaded base unit that applies low-friction side pressure to a workpiece on a spindle moulder or similar machine. It provides the mounting platform for Aigner wheels, pressure shoes or slide shoes, converting these accessories into a precise guidance system. The module adjusts across a reach of 120mm to 510mm from the mounting edge, suiting a wide range of workpiece widths and machine set-ups. Fitted with pressure roller accessories, it reaches a maximum height of 160mm from the table. Applications: Spindle moulding, edge shaping, workpiece guidance on moulders, joinery and cabinet-making production lines Key Features: — Adjustable reach 120–510mm — Accommodates a wide range of workpiece widths from a single unit — Maximum height 160mm from table — Suits varying stock thicknesses when fitted with pressure rollers — Spring-loaded pressure mechanism — Maintains consistent side pressure throughout the pass for safer feeding — Low-friction contact design — Reduces resistance against the workpiece, minimising marking and feed inconsistency — Compatible with wheels, pressure shoes and slide shoes — Allows the module to be configured for different guidance requirements — Universal mounting base — Serves as the core fitting for the wider Aigner accessory range — Robust modular construction — Withstands repeated repositioning without loss of accuracyIn Stock£275.00£330.00 -
An important basic unit to provide low friction side pressure on the workpiece passing through a spindle moulder or other machine In combination with the Aigner single, double or quad wheels, pressure shoe, or slide shoe the spring-loaded pressure module provides a precise guidance for safe operation Minimum reach when used with pressure roller(s) from mounting edge 5mm Maximum reach when used with pressure roller(s) from mounting edge 630mm Maximum height when used with pressure roller(s) from table 160mmIn Stock£303.00£363.60 -
The Aigner Bowmould master shaping guard is a patented modular system designed for safe, controlled machining on curved workpieces. Configured for either left- or right-hand operation, it suits both hand-fed and power-fed processes without modification. The infinitely adjustable infeed guide and spring-loaded transparent shield allow the operator to set precise pressure on the workpiece whilst maintaining a clear sightline to the cutting tool. Dust and chip extraction is handled via an integrated collection system with a rear-mounted spigot, with dust shields accommodating tool diameters up to 150mm. A brake shoe is integrated into the starting strip, which swings through 90° between its working and inoperative positions, locking automatically in both. This ensures reliable stopping of the starting ring. The maximum tool diameter accepted by the system is 220mm. Optional accessories include a curved moulding stop that slips onto the arbor for precise depth-of-moulding adjustment, and guide wheels for accurate workpiece guidance throughout the cut. Applications: curved moulding, spindle moulding, power feeding on curved work, hand feeding on curved work Key Features: — Patented modular system — configures for left- or right-hand machining without requiring separate equipment — Infinitely adjustable infeed guide — allows precise set-up for varying workpiece profiles — Spring-loaded transparent shield — maintains consistent pressure on the workpiece whilst keeping the tool visible to the operator — Integrated dust and chip collection with rear spigot — keeps the work area clear and connects directly to extraction without additional fittings — Dust shields rated to 150mm tool diameter — accommodates a wide range of spindle tooling within the guarded envelope — Maximum tool diameter of 220mm — supports large-profile tooling for substantial moulding work — Brake shoe integrated into the starting strip — ensures reliable stopping of the starting ring, locking automatically in both working and inoperative positions — Starting strip swings 90° between positions — quick transition between active and inoperative states without tools — Fully adjustable guard brushes — adapt to varied workpiece thicknesses and profiles to maintain effective guarding — Optional curved moulding stop (arbor-mounted) — provides repeatable, precise depth-of-moulding adjustment on curved sections — Optional guide wheels — ensure accurate and consistent workpiece guidance throughout the cutIn StockList £1,036.80£798.00Inc Vat £957.60 -
-
The Aigner Centrex is a combined safety guard and pressure unit designed specifically for spindle moulders. Its defining feature is the ability to swivel clear of the workpiece zone and behind the table, allowing rapid tooling changes without removing the unit entirely. The guard accepts a maximum inner width of 335mm and stands 215mm in height. Applications: spindle moulding, tooling changes, workpiece guarding Key Features: — Swivel-away mounting — the guard pivots behind the table for fast tooling access without full removal — 335mm maximum inner width — accommodates a wide range of workpiece and tooling configurations — 215mm height — provides adequate coverage for tall workpieces and deep profiles — Combined guard and pressure unit — integrates two functions in a single fitting, reducing setup complexity — Aigner Centrex system compatibility — designed as part of the Aigner modular range for consistent integration with existing spindle moulder setupsIn StockList £820.80£517.00Inc Vat £620.40 -
Aigner Clamp I A universal support for a wide range of safety equipment. The clamp positions safety equipment safely and quickly in both horizontal and vertical positions and can be fastened to mounting rails, mounting plates or to the integral fence.Lead Time: 34 Days£49.00£58.80 -
Aigner Clamping Shoes provide a reliable means of securing working units to mounting rails, integral fences, or mounting plates. Constructed from anodised aluminium, they offer corrosion resistance and long service life in demanding workshop environments. Each shoe has a clamping length of 172mm and is fitted with two M6 threaded holes for straightforward, secure attachment. Key Features: — Anodised aluminium construction — resists corrosion and wear in continuous workshop use — 172mm clamping length — accommodates a practical range of working unit sizes — Two M6 threaded holes — provides secure, standardised fixing points compatible with common hardware — Compatible with mounting rails, integral fences, and mounting plates — versatile placement across a range of machine setups — Designed for securing working units — maintains precise, repeatable positioning during machining operationsIn Stock£30.00£36.00 -
Aigner Clamping Shoes are designed to secure working units to mounting rails, integral fences, or mounting plates. Constructed from anodised aluminium, each shoe provides a corrosion-resistant, durable clamping point suited to repeated workshop use. Each unit features two M6 threaded holes and a 40 mm clamping length. Key Features: — Anodised aluminium construction — corrosion-resistant and durable for sustained workshop use — 40 mm clamping length — defined contact area for consistent, repeatable clamping — Two M6 threaded holes — secure, standardised fixing without the need for additional hardware — Compatible with mounting rails, integral fences, and mounting plates — versatile installation across a range of machine setups — Designed for fixing working units — maintains precise positioning of tooling and workpiece guides during operationIn Stock£24.00£28.80 -
The Aigner clampstrip addresses one of the more hazardous operations in the workshop: moulding short workpieces safely and consistently. The clamping mechanism allows split-second workpiece changes, reducing cycle time without compromising operator safety. The body is machined from high-grade aluminium, keeping the unit light whilst maintaining rigidity under repeated clamping cycles. It is designed to work in conjunction with Aigner table extensions and adjustable stops, making it a practical component within a wider accident-prevention setup. Applications: short workpiece moulding, spindle moulding safety, accident prevention setups Key Features: — Maximum clamping length of 550mm — accommodates a practical range of short workpieces in a single setup — Split-second clamping system — minimises changeover time between workpieces without sacrificing operator safety — High-grade aluminium body — reduces overall weight whilst providing the rigidity required for consistent clamping pressure — Designed for use with Aigner table extensions — integrates directly into an Aigner system for a coordinated short-piece moulding solution — Compatible with Aigner adjustable stops — enables repeatable, accurate positioning of short workpieces — Purpose-designed for short workpiece moulding — reduces the risk of kickback and contact injuries associated with unsupported short stockIn Stock£229.00£274.80 -
The Aigner Contermax is a purpose-built clamping device for spindle moulders, designed specifically for safe machining of smaller workpieces and end grain sections. It secures the workpiece firmly against the spindle fence and at 90 degrees to the spindle without requiring adjustment to the spindle's rise and fall position or fence alignment. A backing piece can be fitted to prevent break-out, making it particularly suited to end grain moulding where workpiece stability is critical. Applications: spindle moulding, end grain moulding, small workpiece machining Key Features: — Quick-release clamp mechanism — secures and releases workpieces rapidly, maintaining safe control throughout the cut — 90-degree workpiece orientation — allows end grain moulding without repositioning the spindle or fences — 200mm maximum clamping width — accommodates a practical range of smaller timber sections — Compatible with standard spindle fences — integrates directly into existing spindle moulder setups without modification — No spindle rise and fall adjustment required — reduces setup time when switching between face and end grain operations — Backing piece fitment — prevents break-out on end grain cuts, improving finish quality and reducing wasteIn StockList £177.60£120.00Inc Vat £144.00 -
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 150mm capacity Bowmould Master. It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate. To suit shaft diameter 1 1/2Lead Time: 34 Days£288.00£345.60 -
The Aigner Counterstop machining guide is designed for use with the 150mm capacity Bowmould Master, providing precise control when machining curved components. It mounts directly on the spindle and adjusts simultaneously with the cutter head, ensuring the machining depth remains consistently aligned throughout the operation. Depth of machining is infinitely adjustable within the cutting circle of the tool in use, with calibration made against a scale marked directly on the plate. Supplied to suit a 30mm shaft diameter. Applications: curved component machining, spindle moulding Key Features: — Infinite depth adjustment — allows precise setting of machining depth anywhere within the tool's cutting circle, without fixed increments — Simultaneous spindle and cutter head adjustment — height changes to the cutter head are matched automatically, maintaining consistent depth reference throughout setup — Scale marked directly on the plate — depth calibration can be read and repeated accurately without separate measuring instruments — 30mm shaft diameter compatibility — suits standard spindle configurations used with the Bowmould Master — Designed for use with the 150mm Bowmould Master — ensures correct geometric relationship between guide and tooling when machining curved profiles — Spindle-mounted design — positions the guide at the point of cut for maximum stability and accuracy during curved machining operationsLead Time: 34 Days£277.00£332.40 -
The Aigner Counterstop machining guide is designed for use with the 150mm capacity Bowmould Master, providing precise depth control when machining curved components on the spindle moulder. Mounted directly on the spindle, the guide rises and falls in unison with the cutter head, ensuring the machining depth setting is maintained throughout any height adjustment. Depth of cut is set via infinite adjustment within the cutting circle of the tool in use, with the position read off a calibrated scale marked on the guide plate. Suits spindle shaft diameters of 35mm. Applications: curved component machining, spindle moulding Key Features: — Designed for use with the 150mm Bowmould Master — ensures compatibility and accurate guidance when machining curved profiles — Spindle-mounted installation — the guide moves simultaneously with the cutter head, preserving depth settings across height adjustments — Infinite depth adjustment within the tool's cutting circle — precise control over depth of machining without fixed incremental steps — Calibrated scale on guide plate — allows repeatable, readable depth settings without the need for separate measuring instruments — 35mm shaft diameter fitment — matches standard spindle dimensions for straightforward installationLead Time: 34 Days£240.00£288.00 -
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 150mm capacity Bowmould Master. It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate. To suit shaft diameter 40mmIn Stock£247.00£296.40 -
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 150mm capacity Bowmould Master. It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate. To suit shaft diameter 50mmLead Time: 34 Days£269.00£322.80 -
The Aigner Counterstop machining guide is designed for use with the 220 mm capacity Bowmould Master, providing precise control when machining curved components on a spindle moulder. Mounted directly on the spindle, the guide rises and falls simultaneously with the cutter head, maintaining accurate alignment throughout height adjustment. Machining depth is set via infinite adjustment within the cutting circle of the tool in use, with depth calibration read directly from a graduated scale on the plate. Designed to suit a 1½" shaft diameter, it is a purpose-built accessory for consistent, repeatable curved profile work. Applications: curved component machining, spindle moulding, profile work with Bowmould Master Key Features: — Compatibility with 220 mm Bowmould Master — purpose-matched accessory for curved component machining without adaptation — Spindle-mounted configuration — the guide moves simultaneously with the cutter head, maintaining consistent alignment during height adjustment — Infinite depth adjustment within cutting circle — precise, stepless control over machining depth for the tool in use — Graduated scale on plate — depth settings are read directly and calibrated accurately, reducing setup time — 1½" shaft diameter fitment — direct compatibility with standard spindle sizes used on the Bowmould Master — Simultaneous height and depth adjustment — single-operation setup reduces the risk of misalignment between cutter and guideLead Time: 34 Days£328.00£393.60 -
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 220mm capacity Bowmould Master. It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate. To suit shaft diameter 1 1/4Lead Time: 34 Days£328.00£393.60 -
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 220mm capacity Bowmould Master. It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate. To suit shaft diameter 30mmIn Stock£249.00£298.80 -
The Aigner Counterstop machining guide is designed for use with the 220mm capacity Bowmould Master, providing precise control when machining curved components on the spindle moulder. It mounts directly to the spindle, with height adjustment made simultaneously alongside the cutter head — ensuring the machining depth remains consistently aligned throughout the operation. Depth adjustment is infinitely variable within the cutting circle of the tool in use, and is calibrated against a clearly marked scale on the plate. Suited to a 35mm shaft diameter. Applications: curved component machining, spindle moulding Key Features: — Infinite depth adjustment — allows precise setting of machining depth anywhere within the tool's cutting circle, without fixed increments — Simultaneous height adjustment — guide rises and falls with the cutter head, maintaining alignment without separate re-setting — Calibrated scale on plate — depth of machining can be read and repeated accurately without trial-and-error — 35mm shaft diameter compatibility — suits the standard spindle diameter used with the Bowmould Master system — Designed for the 220mm Bowmould Master — purpose-built integration ensures correct fit and reliable performance within the system — Curved component capability — specifically configured for profiling and moulding curved workpieces, not limited to straight-line work — Spindle-mounted configuration — secure, direct mounting to the spindle eliminates additional fixturing and maintains rigidity during cuttingLead Time: 34 Days£258.00£309.60 -
The Aigner Counterstop machining guide is designed for use with the 220mm capacity Bowmould Master, providing precise control when machining curved components on the spindle moulder. Depth of machining is infinitely adjustable within the cutting circle of the tool in use, with the guide mounted directly on the spindle so that height adjustment moves simultaneously with the cutter head. Machining depth is calibrated against a scale marked on the plate, ensuring repeatable settings without guesswork. Suits a shaft diameter of 40mm. Applications: curved component machining, spindle moulding Key Features: — Infinite depth adjustment — allows precise setting of machining depth anywhere within the tool's cutting circle, without fixed increments — Simultaneous height adjustment — guide moves with the cutter head when mounted on the spindle, maintaining consistent geometry throughout adjustment — Calibrated scale on plate — machining depth can be set and repeated accurately without relying on trial cuts — 40mm shaft diameter compatibility — suits the standard spindle diameter of machines used with the Bowmould Master system — Designed for the 220mm Bowmould Master — engineered as a matched accessory, ensuring correct fit and function within that system — Curved component support — provides the necessary guidance and registration for profiling irregular or curved workpieces safely and consistentlyLead Time: 34 Days£264.00£316.80 -
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 220mm capacity Bowmould Master. It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate. To suit shaft diameter 50mmLead Time: 34 Days£308.00£369.60 -
The Aigner wooden cross stop is designed specifically for use with Aigner extension tables, providing a reliable fixed reference point when running stopped mouldings. A locking lever allows precise repositioning without tooling, making it suitable for pocketing, stopped moulding, and chamfering operations. Used in conjunction with a compatible clamp handle — such as AI214283000192 or AI214287000193 — it ensures controlled, repeatable cuts with consistent results. Applications: stopped mouldings, pocketing, chamfering Key Features: — Aigner extension table compatibility — designed to mount directly onto Aigner extension tables without modification — Locking lever adjustment — allows quick, precise repositioning without additional tooling — Fixed reference point — provides a secure stop for consistent, repeatable cut lengths — Compatible with Aigner clamp handles AI214283000192 and AI214287000193 — integrates with existing Aigner clamping accessories for safe workpiece control — Wooden construction — protects workpiece faces from marking during stopped cuts — Suitable for chamfering operations — versatile across multiple routing and moulding applicationsLead Time: 34 Days£59.00£70.80 -
Aigner Dust Exhaust Designed to sit behind Bowmould to offer extraction when machining curved workpieces Magnetic seating makes for simple locating Exhauist diameter 120mmLead Time: 34 Days£235.00£282.00 -
The Aigner modular table extension provides a stable, lightweight outfeed and infeed support platform suited to a wide range of stationary machines. The table measures 1,100 mm × 170 mm and is constructed from anodised aluminium, combining rigidity with corrosion resistance whilst keeping the unit to 6 kg. It clips on and off the machine in seconds, making it practical in workshop environments where machines serve multiple functions. Two units can be joined end-to-end using the Aigner coupling bracket (AI212226000172) to create a 2,200 mm support run, or multiple tables can be mounted side by side for wider workpiece support. Mounting rails are sold separately and a range of rail lengths is available to suit different machine configurations. The fold-down leg adjusts across a wide height range and locks securely in position. An optional back stroke protection accessory makes the table particularly useful when producing stop mouldings. The system also accepts compatible Aigner accessories including CirQuick and Segmenter units for arc and curve cutting operations. Applications: bandsaws, spindle moulders, shapers, circular saws, stop moulding, arc and curve cutting Key Features: — Anodised aluminium table surface — resists corrosion and wear whilst keeping the unit lightweight at 6 kg — 1,100 mm × 170 mm table dimensions — provides a consistent, defined support area suitable for standard board and section work — Tool-free clip mounting — attaches and removes in seconds, minimising downtime when reconfiguring the machine — Fold-down leg with height adjustment — locks securely at the required working height to match the machine table — Coupling bracket compatibility (AI212226000172) — two units join end-to-end to create a continuous 2,200 mm support run — Side-by-side mounting capability — multiple tables can be arranged for wider workpiece support without additional fabrication — Optional back stroke protection accessory — enables safe, accurate production of stop mouldings — CirQuick and Segmenter accessory compatibility — supports arc and curve cutting operations as part of the wider Aigner modular system — Separate mounting rail system — allows the table to be configured to suit specific machine profiles and fence arrangementsIn StockList £253.20£185.00Inc Vat £222.00 -
Aigner Glassledger I This device enables glazing beads to be sawn from previously milled sections of window framing. The Aigner Glassledger is clamped between the two halves of the integral fence. There are spacer forks provided to adjust for different widths of glazing sections and version I is suitable for profiles shown in diagram ALead Time: 34 Days£165.00£198.00 -
Aigner Glassledger I This device enables glazing beads to be sawn from previously milled sections of window framing. The Aigner Glassledger is clamped between the two halves of the integral fence. There are spacer forks provided to adjust for different widths of glazing sections and version II is suitable for profiles shown in diagram BLead Time: 34 Days£165.00£198.00 -
The Aigner Guide Wheels use a pegboard-style mounting system that allows both wheels to be repositioned across the main assembly, giving precise lateral control of the workpiece at the point of cut. Wheel diameter is 60mm, with a maximum spacing of 160mm between the pair. Key Features: — Pegboard-style mounting — Wheels can be repositioned across the assembly to suit varying workpiece widths and profiles — 60mm wheel diameter — Consistent contact and stable guidance across the workpiece face — Maximum 160mm wheel spacing — Accommodates a wide range of workpiece dimensions within a single set-up — Supplied as a matched pair — Both wheels adjust as a system, maintaining balanced pressure either side of the cutting line — Repositionable without additional tooling — Set-up changes are quick and repeatable between production runsLead Time: 34 Days£81.00£97.20 -
Aigner Guide Wheels A unique design where 'peg board' style mounting allows you to mount the wheels in different positions on the main asembly, to give total and unparallelled control of the workpiece Wheel diameter 60mm Wheel thickness 10mm Maximum wheel spacing approx 320mm No of wheels 2 sets of 4Lead Time: 34 Days£240.00£288.00 -
Aigner Guide Wheels use a pegboard-style mounting system that allows both sets of wheels to be repositioned across the main assembly, giving precise control over workpiece alignment and feed. The adjustable spacing accommodates a range of material widths without requiring additional tooling or fixtures. Key Features: — Pegboard-style mounting pattern — wheels reposition across multiple fixing points to suit varying workpiece widths — 60mm wheel diameter — consistent contact and stable guidance across the workpiece face — Adjustable wheel spacing — approximately 130mm to 180mm — accommodates a range of material sizes within a single setup — Two sets of two wheels — paired arrangement distributes pressure evenly and maintains workpiece registration — Repositionable without additional tooling — setup changes are made directly on the assembly, reducing downtime between jobsLead Time: 34 Days£148.00£177.60 -
Aigner Hinged Bridge To allow the Aigner Centrex to swivel out of the way and behind the table Maximum inner width 335mm Height 215mmLead Time: 34 Days£241.00£289.20 -
Aigner Hinged Bridge To allow the Aigner Centrex to swivel out of the way and behind the table Maximum inner width 335mm Height 520mmLead Time: 34 Days£250.00£300.00 -
Aigner Horizontal Pressure Shoe (aluminium part 'C' only) for the Centrex guardLead Time: 34 Days£63.00£75.60 -
The Aigner Slide Shoe is a practical accessory designed to support the safe and controlled processing of thin or narrow workpieces, where standard guiding arrangements may be insufficient. It assists in maintaining consistent workpiece contact and feed path at the machine table. Key Features: — Designed for thin and narrow workpieces — maintains controlled feed and support where standard guides are inadequate — Slide shoe construction — reduces friction and assists smooth, consistent workpiece travel — Compatible with Aigner accessory system — integrates with existing Aigner guiding and fence arrangements — Compact form factor — does not obstruct the working area or interfere with adjacent tooling — Robust material construction — withstands repeated contact with workpiece edges without premature wearLead Time: 14 Days£90.00£108.00 -
Aigner Mounting blocks For fastening the Aigner Centrex and the supporting bridge to the rear edge of the machine table. These are used when the distance at the rear of the spindle shaft is not sufficient for the Centrex to be used close to the fence in its fully closed position.Lead Time: 34 Days£43.00£51.60 -
The Aigner Mounting Plates II are designed specifically for use with the Aigner Clamp I (AI212273000192), providing a secure and purpose-built fixing solution for workshop installations where consistent clamp positioning is required. Key Features: — Compatible with Aigner Clamp I (AI212273000192) — ensures a matched, purpose-built mounting solution without adaptation or modification — Dedicated mounting geometry — provides repeatable clamp positioning across multiple setups — Purpose-designed fixing interface — eliminates the need for improvised or generic mounting arrangements — Rigid plate construction — maintains clamp stability under working loads — Designed for workshop installation — suits permanent or semi-permanent fixture arrangements on machines and benchesLead Time: 34 Days£52.00£62.40 -
Aigner mounting rails provide a secure, compatible fixing system for attaching Aigner safety and working units to spindle moulders, bandsaws, sawbenches, and other workshop machines. Supplied complete with fixing bolts, each rail offers a ready-to-fit solution for integrating Aigner extension tables, pressure rollers, and ancillary modules. Available in a range of lengths, with this listing covering the 330 mm rail. Applications: Spindle moulders, bandsaws, sawbenches Key Features: — 330 mm rail length — suits a wide range of machine configurations and mounting positions — Compatible with Aigner safety and working units — ensures a secure, manufacturer-matched fit across the Aigner modular system — Accepts extension tables and pressure rollers — allows the working envelope and hold-down capability of the host machine to be expanded — Supplied complete with fixing bolts — no additional hardware required for installation — Available in multiple lengths — allows selection of the correct rail for the machine and applicationIn StockList £30.00£23.00Inc Vat £27.60 -
Aigner mounting rails provide a secure, standardised fixing system for attaching Aigner safety and working units to spindle moulders, bandsaws, sawbenches, and a range of other machines. Supplied complete with fixing bolts, each rail accepts Aigner extension tables, pressure rollers, and additional modules. Available in a range of lengths, with the 430 mm rail suited to compact installations. Applications: spindle moulders, bandsaws, sawbenches Key Features: — 430 mm rail length — suited to compact machine setups and targeted module positioning — Standardised Aigner fixing system — ensures compatibility across the full range of Aigner safety and working units — Supplied complete with fixing bolts — ready to mount without the need for additional hardware — Compatible with Aigner extension tables and pressure rollers — enables modular expansion of machine functionality — Available in multiple lengths — allows selection to suit different machine sizes and configurationsLead Time: 14 DaysList £31.20£24.00Inc Vat £28.80 -
Aigner mounting rails provide a secure, standardised fixing system for attaching Aigner safety and working units to spindle moulders, bandsaws, sawbenches, and similar machines. Supplied complete with fixing bolts, they accept extension tables, pressure rollers, and other Aigner modules. Available in a range of lengths; the rail listed here is 530 mm. Applications: Spindle moulders, bandsaws, sawbenches Key Features: — 530 mm rail length — suits a wide range of machine bed widths and mounting configurations — Compatible with Aigner safety and working units — provides a standardised fixing platform for extension tables, pressure rollers, and ancillary modules — Supplied complete with fixing bolts — ready to mount without sourcing additional hardware — Available in multiple lengths — allows selection to match the specific machine and application — Universal machine compatibility — suitable for spindle moulders, bandsaws, sawbenches, and other workshop machinesIn StockList £32.40£25.00Inc Vat £30.00 -
Aigner mounting rails provide a dedicated fixing system for attaching Aigner safety and working units to spindle moulders, bandsaws, sawbenches, and similar machines. Supplied complete with fixing bolts, each rail offers a secure and repeatable mounting point for extension tables, pressure rollers, and other Aigner modules. Available in a range of lengths, with the standard rail measuring 830 mm. Applications: Spindle moulders, bandsaws, sawbenches Key Features: — 830 mm standard rail length — suits the most common bench and machine configurations — Compatible with Aigner extension tables and pressure rollers — enables a coordinated system of safety and working units on a single machine — Supplied complete with fixing bolts — ready to mount without the need for additional hardware — Suitable for spindle moulders, bandsaws, and sawbenches — broad compatibility across the most frequently used workshop machines — Available in multiple lengths — allows fitting to machines of varying sizes and working envelopesIn StockList £36.00£27.00Inc Vat £32.40 -
The Aigner Mounting Rail Adjustable gives a secure, precisely positioned fixing point for Aigner safety and working units on the front support rail of a spindle moulder. Measuring 830mm in length with a 100mm rear vertical height and 40mm horizontal opening depth, it provides ample clearance for mounting extension tables, pressure rollers and other Aigner modules. Supplied complete with fixing bolts, the rail installs immediately without additional hardware and forms part of the wider Aigner rail system, compatible with spindle moulders, bandsaws and sawbenches. Applications: Spindle moulders, bandsaws, sawbenches, mounting of Aigner safety and working units, fixing extension tables, mounting pressure rollers Key Features: — 830mm rail length — provides ample fixing length for mounting multiple Aigner modules along a single rail — Adjustable design — allows precise positioning to suit different machine setups and workpiece requirements — 40mm horizontal opening depth — ensures sufficient clearance for secure fitting of extension tables and pressure rollers — Front support rail compatibility — designed specifically for mounting on the front support rail of a spindle moulder — Supplied with fixing bolts — removes the need to source separate hardware, reducing installation time — Compatible with Aigner modular system — integrates directly with extension tables, pressure rollers and other safety accessories — Multi-machine application — suitable for use on spindle moulders, bandsaws, sawbenches and other compatible machineryIn Stock£130.00£156.00 -
The Aigner Open Ended Mounting Rail has a modified profile that lets the mounted fixture slide freely along its length, rather than locking it to fixed points. This gives operators greater latitude when positioning safety and working units on the machine bed. Measuring 230mm with mounting hole centres at 100mm, the rail is supplied with fixing bolts and accepts Aigner extension tables, pressure rollers and other compatible modules. Suited to spindle moulders, bandsaws and sawbenches, it forms part of the wider Aigner modular system and is available in other lengths to match different machine beds. Applications: Spindle moulders, bandsaws, sawbenches, other Aigner-compatible woodworking machines Key Features: — Open-ended profile — Allows the mounted fixture to slide along the entire rail length for flexible positioning — 230mm rail length — Suits compact mounting requirements on smaller machine beds — 100mm mounting hole centres — Provides a consistent, repeatable fixing pattern for compatible Aigner units — Supplied with fixing bolts — Ready for installation without sourcing separate hardware — Compatible with Aigner modules — Accepts extension tables and pressure rollers to extend machine functionality — Multi-machine application — Fits spindle moulders, bandsaws, sawbenches and other machinery — Part of a modular rail range — Available in multiple lengths to match different machine configurationsIn StockList £24.00£18.00Inc Vat £21.60 -
The Aigner Open-Ended Mounting Rail is a modified version of the standard mounting rail, designed to allow fixtures to be slid along the full length of the rail rather than being constrained at a fixed point. This makes it straightforward to reposition Aigner safety units, pressure rollers, and extension tables without removing the assembly entirely. Supplied complete with fixing bolts, the rail is available in a range of lengths to suit different machine configurations. Applications: spindle moulders, bandsaws, sawbenches Key Features: — Open-ended rail design — allows fixtures to be slid along the entire rail length, enabling repositioning without full disassembly — 330mm rail length — suits a range of machine sizes and mounting positions — 150mm mounting hole centres — consistent spacing compatible with standard Aigner module fixings — Compatible with Aigner extension tables — expands the working surface of the host machine without modification — Compatible with Aigner pressure rollers and safety units — enables the addition of workpiece control and guarding directly to the machine — Supplied complete with fixing bolts — ready to mount without sourcing additional hardware — Available in a range of lengths — allows selection to match the specific machine or application requirementIn Stock£22.00£26.40 -
Aigner Mounting Rail Open Ended A modified design to allowing the fixture being mounted to be slid along the entire length of the rail or rails An ideal addition for spindle moulders, bandsaws, sawbenches and many other machines, to mount and fixing Aigner safety and working units. Available in a range of lentghts, the rails can be used to fix Aigner extension tables, pressure rollers, and other modules, that afford extra safety and ease to machining processes. They are supplied complete with fixing bolts. Rail length 430mm Mounting hole centres 200mmIn Stock£24.00£28.80 -
Aigner Mounting Rail Open Ended A modified design to allowing the fixture being mounted to be slid along the entire length of the rail or rails An ideal addition for spindle moulders, bandsaws, sawbenches and many other machines, to mount and fixing Aigner safety and working units. Available in a range of lentghts, the rails can be used to fix Aigner extension tables, pressure rollers, and other modules, that afford extra safety and ease to machining processes. They are supplied complete with fixing bolts. Rail length 530mm Mounting hole centres 300mmIn Stock£26.00£31.20
