Flexible Extraction Hose
(32 Products)Polyurethane flexible extraction hose for connecting woodworking machinery to dust extraction systems. Our PU S1 hose is constructed from abrasion-resistant ester-based polyurethane with a copper-coated steel helix, providing durability for continuous industrial use whilst maintaining flexibility for routing around machinery.
Available in diameters from 52 mm to 254 mm and lengths from 3 m to 20 m, these hoses suit everything from portable planers and sanders to CNC routers and panel saws. The antistatic copper wire ensures safe dissipation of static charge during operation. If you need assistance matching hose diameter to your machinery or extraction setup, our team can advise.
-
Heavy Duty PU Hose Technical Features: Ester based Polyurethane duct reinforced with a steel spiral copper coated. Constant wall thickness of 0,40mm. Properties: Very light and flexible, axially compressible (about 5:1) for easy handling and costs saving in stocking and transporting. The PU-coated spiral allows more bending sessions, thus the duct has good mechanical properties and it is especially suitable for dynamic applications.Resistant to abrasion. Halogens free conform to RoHS and phthalates free. Standards: It can be made electrically bonded by earthing the steel spiral. (For further info regarding Electrical Resistance: The electrical resistance R 102 Ohm/m is according to ISO 8031 - ATEX Directive 94/4/EC and 99/92/EC). REACH Regulation (1907/2006) Temperature Range: -40°C+90°C (+125°C short time)Lead Time: 26 Days -
Airhose 200 mm (8"") L= 5.00 mtr MAXVAC Airhose Ducting is made from ultra tough and endurable material and can be attached to the front or rear of most of the MAXVAC Dustblocker, MEDI & Air Movement Fan ranges to enable ducting the to or away from the machine. This is great for creating positive or negative pressure areas or simply to channel air extraction along a specific route to or away from the machine. The MAXVAC Airhose flexible ducting hose can be used in many industrial air movement applications. These lightweight hoses are made from PVC vinyl coated polyester fabric and has been reinforced with a spring steel wire helix for added strength when flexed. Each section of orange flex duct is constructed with a protective external wear-strip. The protective wear-strip provides an added layer of protection from dragging and scraping the hose material on the ground. Heat resistant up to 100°C Also available in other sizes, call us if your size isn't listed or you require a custom size. Diameter Length 200 mm (8"") 5 mtr 250 mm (10"") 5 mtr 300 mm (12"") 5 mtr 400 mm (16"") 5 mtr 500 mm (20"") 5 mtr 600 mm (24"") 5 mtrLead Time: 15 Days -
Airhose 250 mm (10"") L= 5.00 mtr MAXVAC Airhose Ducting is made from ultra tough and endurable material and can be attached to the front or rear of most of the MAXVAC Dustblocker, MEDI & Air Movement Fan ranges to enable ducting the to or away from the machine. This is great for creating positive or negative pressure areas or simply to channel air extraction along a specific route to or away from the machine. The MAXVAC Airhose flexible ducting hose can be used in many industrial air movement applications. These lightweight hoses are made from PVC vinyl coated polyester fabric and has been reinforced with a spring steel wire helix for added strength when flexed. Each section of orange flex duct is constructed with a protective external wear-strip. The protective wear-strip provides an added layer of protection from dragging and scraping the hose material on the ground. Heat resistant up to 100°C Also available in other sizes, call us if your size isn't listed or you require a custom size. Diameter Length 200 mm (8"") 5 mtr 250 mm (10"") 5 mtr 300 mm (12"") 5 mtr 400 mm (16"") 5 mtr 500 mm (20"") 5 mtr 600 mm (24"") 5 mtrLead Time: 15 Days -
Airhose 300 mm (12"") L= 5.00 mtr MAXVAC Airhose Ducting is made from ultra tough and endurable material and can be attached to the front or rear of most of the MAXVAC Dustblocker, MEDI & Air Movement Fan ranges to enable ducting the to or away from the machine. This is great for creating positive or negative pressure areas or simply to channel air extraction along a specific route to or away from the machine. The MAXVAC Airhose flexible ducting hose can be used in many industrial air movement applications. These lightweight hoses are made from PVC vinyl coated polyester fabric and has been reinforced with a spring steel wire helix for added strength when flexed. Each section of orange flex duct is constructed with a protective external wear-strip. The protective wear-strip provides an added layer of protection from dragging and scraping the hose material on the ground. Heat resistant up to 100°C Also available in other sizes, call us if your size isn't listed or you require a custom size. Diameter Length 200 mm (8"") 5 mtr 250 mm (10"") 5 mtr 300 mm (12"") 5 mtr 400 mm (16"") 5 mtr 500 mm (20"") 5 mtr 600 mm (24"") 5 mtrLead Time: 15 Days -
Airhose 400 mm (16"") L= 5.00 mtr MAXVAC Airhose Ducting is made from ultra tough and endurable material and can be attached to the front or rear of most of the MAXVAC Dustblocker, MEDI & Air Movement Fan ranges to enable ducting the to or away from the machine. This is great for creating positive or negative pressure areas or simply to channel air extraction along a specific route to or away from the machine. The MAXVAC Airhose flexible ducting hose can be used in many industrial air movement applications. These lightweight hoses are made from PVC vinyl coated polyester fabric and has been reinforced with a spring steel wire helix for added strength when flexed. Each section of orange flex duct is constructed with a protective external wear-strip. The protective wear-strip provides an added layer of protection from dragging and scraping the hose material on the ground. Heat resistant up to 100°C Also available in other sizes, call us if your size isn't listed or you require a custom size. Diameter Length 200 mm (8"") 5 mtr 250 mm (10"") 5 mtr 300 mm (12"") 5 mtr 400 mm (16"") 5 mtr 500 mm (20"") 5 mtr 600 mm (24"") 5 mtrLead Time: 15 Days£133.00£159.60As low as £140.45 -
Airhose 500 mm (20"") L= 5.00 mtr MAXVAC Airhose Ducting is made from ultra tough and endurable material and can be attached to the front or rear of most of the MAXVAC Dustblocker, MEDI & Air Movement Fan ranges to enable ducting the to or away from the machine. This is great for creating positive or negative pressure areas or simply to channel air extraction along a specific route to or away from the machine. The MAXVAC Airhose flexible ducting hose can be used in many industrial air movement applications. These lightweight hoses are made from PVC vinyl coated polyester fabric and has been reinforced with a spring steel wire helix for added strength when flexed. Each section of orange flex duct is constructed with a protective external wear-strip. The protective wear-strip provides an added layer of protection from dragging and scraping the hose material on the ground. Heat resistant up to 100°C Also available in other sizes, call us if your size isn't listed or you require a custom size. Diameter Length 200 mm (8"") 5 mtr 250 mm (10"") 5 mtr 300 mm (12"") 5 mtr 400 mm (16"") 5 mtr 500 mm (20"") 5 mtr 600 mm (24"") 5 mtrLead Time: 15 Days£141.00£169.20As low as £148.90 -
Airhose 600 mm (24"") L= 5.00 mtr MAXVAC Airhose Ducting is made from ultra tough and endurable material and can be attached to the front or rear of most of the MAXVAC Dustblocker, MEDI & Air Movement Fan ranges to enable ducting the to or away from the machine. This is great for creating positive or negative pressure areas or simply to channel air extraction along a specific route to or away from the machine. The MAXVAC Airhose flexible ducting hose can be used in many industrial air movement applications. These lightweight hoses are made from PVC vinyl coated polyester fabric and has been reinforced with a spring steel wire helix for added strength when flexed. Each section of orange flex duct is constructed with a protective external wear-strip. The protective wear-strip provides an added layer of protection from dragging and scraping the hose material on the ground. Heat resistant up to 100°C Also available in other sizes, call us if your size isn't listed or you require a custom size. Diameter Length 200 mm (8"") 5 mtr 250 mm (10"") 5 mtr 300 mm (12"") 5 mtr 400 mm (16"") 5 mtr 500 mm (20"") 5 mtr 600 mm (24"") 5 mtrLead Time: 15 Days£162.00£194.40As low as £171.07 -
This 3.0 m length of heavy-duty polyurethane flexible hose is designed for continuous use in industrial woodworking environments. The abrasion-resistant PU construction withstands the demands of chip and dust extraction where hose contact with machinery, jigs, or workshop floors is unavoidable. Applications: dust extraction, chip extraction, woodworking machinery Key Features: — 3,000 mm usable length — sufficient reach between machine extraction port and ducting or collector without additional joins — Heavy-duty polyurethane construction — resists abrasion and crushing under workshop conditions, extending service life over standard PVC alternatives — Flexible design — accommodates movement and repositioning of portable or semi-fixed machines without kinking — Industrial-grade specification — rated for continuous duty extraction rather than light intermittent use — Woodworking-specific suitability — handles fine dust, shavings, and chip without accelerated wear to the hose wallIn Stock -
This 102mm diameter flexible PU extraction hose is supplied in a 10-metre length and is designed for continuous-duty woodworking and industrial extraction applications. The ester-based polyurethane construction, reinforced with a copper-coated steel spiral, delivers a constant wall thickness of 0.40mm — ensuring consistent airflow performance and resistance to abrasion from fine particulate and chip-laden airstreams. The hose is axially compressible at a ratio of approximately 5:1, reducing storage and transport volume significantly. The PU-coated spiral construction supports repeated bending cycles without deformation, making it well suited to dynamic installations where the hose is regularly repositioned. Electrical resistance is rated at 102 Ohm/m in accordance with ISO 8031, with the steel spiral capable of earthing to meet ATEX Directive 94/4/EC and 99/92/EC requirements. The material is halogen-free and phthalate-free, conforming to RoHS and REACH Regulation 1907/2006. Operating temperature range is -40°C to +90°C, with short-term tolerance to +125°C. Applications: CNC router dust extraction, woodworking dust extraction, industrial vapour extraction, small industrial cleaning plants, suction plant installations Key Features: — 102mm internal diameter, 10-metre supplied length — direct replacement or extension for standard extraction ducting without on-site cutting or joining — Ester-based polyurethane construction with copper-coated steel spiral — combines flexibility with structural integrity under continuous suction pressure — Constant wall thickness of 0.40mm — uniform airflow resistance and predictable performance across the full hose length — Axial compression ratio of approximately 5:1 — substantially reduces storage and shipping volume, lowering handling and logistics costs — PU-coated steel spiral — supports repeated bending cycles without spiral migration or hose deformation, suited to dynamic installations — High abrasion resistance — extends service life in chip, dust, and particulate-laden extraction duties — Electrical resistance of 102 Ohm/m per ISO 8031 — quantified antistatic performance suitable for use in controlled and classified environments — Steel spiral earthing capability — ATEX Directive 94/4/EC and 99/92/EC compliant — permits safe use in potentially explosive atmospheres when earthed correctly — Halogen-free and phthalate-free construction — meets RoHS and REACH Regulation 1907/2006 requirements for restricted substances — Operating temperature range of -40°C to +90°C (short-term +125°C) — suitable for extraction close to heat sources, including during intermittent high-temperature dischargeIn Stock -
This 6-metre length of 102mm diameter flexible PU ducting is constructed from ester-based polyurethane reinforced with a copper-coated steel spiral, giving it a constant wall thickness of 0.40mm and strong resistance to abrasion — qualities that make it suitable for demanding dynamic applications where lesser hose would degrade rapidly. The hose is axially compressible at approximately 5:1, reducing storage and transport volume considerably. The PU-coated spiral permits repeated bending cycles without compromising structural integrity. Electrical safety is addressed through the earthable steel spiral, with an electrical resistance of 102 Ohm/m tested to ISO 8031 and compliant with ATEX Directives 94/9/EC and 99/92/EC. The material is halogen-free in accordance with RoHS, phthalate-free, and compliant with REACH Regulation 1907/2006. Operating temperature range is -40°C to +90°C, with short-term tolerance up to +125°C. Applications: Dust extraction, vapour extraction, small industrial cleaning, suction plant ducting, woodworking extraction systems Key Features: — Ester-based polyurethane construction — Resists abrasion and degradation in demanding extraction environments — Copper-coated steel spiral reinforcement — Maintains hose geometry under pressure and repeated flexing cycles — Constant wall thickness of 0.40mm — Consistent flow characteristics and predictable mechanical performance throughout the hose length — 5:1 axial compression ratio — Significantly reduces storage space and transport costs when the hose is not in use — PU-coated spiral — Allows more bending sessions without fatigue, extending service life in dynamic installations — Earthable steel spiral — Enables electrical bonding to prevent static build-up, essential in dust and vapour extraction applications — Electrical resistance 102 Ohm/m to ISO 8031 — Verified compliance for use in potentially explosive atmospheres under ATEX Directives 94/9/EC and 99/92/EC — Halogen-free and phthalate-free materials — Compliant with RoHS and REACH Regulation 1907/2006 for safe use in regulated environments — Operating range -40°C to +90°C, +125°C short-term — Suitable for use in cold stores, heated extraction systems, and other thermally variable installations — 6-metre supplied length, 102mm internal diameter — Ready to install in standard extraction runs without additional jointingIn Stock -
This 127mm diameter flexible extraction hose is supplied in a 10-metre length and constructed from ester-based polyurethane reinforced with a copper-coated steel spiral. The constant wall thickness of 0.40mm ensures consistent airflow performance across the full length, whilst the PU-coated spiral provides enhanced resistance to repeated bending cycles — making it well suited to dynamic installations where the hose is regularly repositioned. The hose is axially compressible at a ratio of approximately 5:1, reducing storage and transport volume significantly. It is free from halogens and phthalates, compliant with RoHS and REACH Regulation 1907/2006, and can be made electrically bonded by earthing the steel spiral to meet ATEX Directives 94/4/EC and 99/92/EC. Applications: CNC router dust extraction, woodworking dust extraction, vapour extraction, industrial cleaning, suction plant systems Key Features: — 127mm internal diameter, 10-metre length — suits standard industrial extraction ducting runs without the need for jointing — Ester-based polyurethane construction — offers superior abrasion resistance compared to standard PVC hose — Copper-coated steel spiral reinforcement — maintains bore shape under suction and supports electrical bonding — Constant wall thickness of 0.40mm — ensures uniform flow characteristics and consistent mechanical strength along the full length — Axially compressible at approximately 5:1 ratio — reduces storage space and lowers transport costs when hose is not deployed — PU-coated spiral — allows a greater number of bending cycles, extending service life in dynamic applications — Halogen-free and phthalate-free construction — compliant with RoHS directive and suitable for environmentally sensitive or food-adjacent installations — REACH Regulation 1907/2006 compliant — meets current European chemical safety requirements — Earthable steel spiral — electrical resistance to ISO 8031 — can be configured to meet ATEX Directives 94/4/EC and 99/92/EC for use in potentially explosive atmospheres — Operating temperature range of -40°C to +90°C (short-term peak of +125°C) — suitable for demanding extraction environments including heated process airIn StockList £128.40£78.00Inc Vat £93.60 -
A 3.0 m length of heavy-duty PU flexible dust extraction hose suited to the demands of industrial woodworking environments. The polyurethane construction offers strong resistance to abrasion, making it appropriate for continuous use with sawdust, shavings, and fine timber dust. Applications: dust extraction, woodworking machinery Key Features: — 3,000 mm usable length — sufficient reach between machine outlet and extraction ducting without restricting movement — Polyurethane (PU) construction — resists abrasion and wear from high-velocity dust and chipping contact — Heavy-duty industrial specification — built for continuous workshop use rather than light-duty or domestic extraction — Flexible design — accommodates routing around obstructions and connection to fixed or mobile extraction units — Woodworking-specific suitability — handles the particle sizes and volumes typical of sawdust, shavings, and MDF dustIn Stock -
This 125 mm diameter flexible PU ducting hose is supplied in a 6 m length and is constructed from ester-based polyurethane reinforced with a copper-coated steel spiral. The constant wall thickness of 0.40 mm ensures consistent airflow performance, whilst the PU-coated spiral provides enhanced resistance to repeated bending cycles — making it well suited to dynamic extraction setups where the hose is regularly repositioned. The hose is axially compressible at a ratio of approximately 5:1, reducing storage and transport volume considerably. Its resistance to abrasion makes it appropriate for dusty workshop environments where hose wear is a practical concern. The steel spiral can be earthed to make the hose electrically bonded, with an electrical resistance of 10² Ohm/m in accordance with ISO 8031 and the ATEX Directives 94/9/EC and 99/92/EC. The material is halogen-free, phthalate-free, and compliant with RoHS and REACH Regulation (EC) 1907/2006. Operating temperature range is -40°C to +90°C, with short-term tolerance to +125°C. Applications: dust extraction, vapour extraction, small industrial cleaning, suction plants Key Features: — 125 mm diameter, 6 m length — suits standard workshop extraction ports and provides sufficient reach without jointing — Ester-based polyurethane construction — inherently resistant to abrasion, making the hose durable in dusty or particulate-laden airflows — Copper-coated steel spiral reinforcement — maintains the hose bore under suction and supports electrical bonding via earthing — Constant wall thickness of 0.40 mm — ensures consistent internal diameter and predictable airflow resistance along the full length — PU-coated spiral — withstands repeated bending cycles without fatigue, extending service life in dynamic applications — Axial compression ratio of approximately 5:1 — significantly reduces storage footprint and lowers transport costs — Earthable steel spiral — electrical resistance 10² Ohm/m to ISO 8031 — meets ATEX Directive requirements for use in potentially explosive atmospheres — ATEX compliant (Directives 94/9/EC and 99/92/EC) — approved for use in zones where ignition risk from static discharge must be controlled — Halogen-free and phthalate-free construction — compliant with RoHS and REACH Regulation (EC) 1907/2006 for safe use in regulated environments — Operating temperature range -40°C to +90°C, short-term to +125°C — suitable for both cold store environments and elevated-temperature extraction dutiesIn Stock -
10mtr length of PU 152mm diameter flexible hose for Woodworking industry, cnc router, dust extraction, vapours, small industrial cleaning and suction plants Technical Features: Ester based Polyurethane duct reinforced with a steel spiral copper coated. Constant wall thickness of 0,40mm. Properties: Very light and flexible, axially compressible (about 5:1) for easy handling and costs saving in stocking and transporting. The PU-coated spiral allows more bending sessions, thus the duct has good mechanical properties and it is especially suitable for dynamic applications.Resistant to abrasion. Halogens free conform to RoHS and phthalates free. Standards: It can be made electrically bonded by earthing the steel spiral. (For further info regarding Electrical Resistance: The electrical resistance R 102 Ohm/m is according to ISO 8031 - ATEX Directive 94/4/EC and 99/92/EC). REACH Regulation (1907/2006) Temperature Range: -40°C+90°C (+125°C short time)In Stock -
A 20-metre roll of flexible polyurethane ducting, 152 mm diameter, designed for the extraction of shavings, chips, and waste material in woodworking environments. PU construction offers good abrasion resistance and flexibility, making it suitable for connecting machinery to extraction systems where rigid ducting is impractical. Applications: woodworking waste extraction, shavings extraction, chip extraction, dust extraction ducting Key Features: — 152 mm diameter — suits a wide range of standard woodworking extraction ports and collector inlets — 20-metre roll length — provides sufficient run for most workshop installations without additional joins — Polyurethane (PU) construction — resists abrasion from chips and shavings, extending service life in demanding extraction duties — Flexible format — allows routing around machinery and obstructions where rigid ducting cannot be used — Suited to shavings, chips, and waste extraction — bore and material selected for the particle sizes and flow conditions typical of woodworking machinery — Roll supplied as continuous length — installer can cut to exact requirements, minimising waste and reducing the number of jointsLead Time: 26 Days -
A 3.0 m length of heavy-duty industrial PU flexible hose, designed for dust extraction on woodworking machinery. The polyurethane construction offers strong resistance to abrasion, making it suitable for sustained use in dusty workshop environments. Applications: dust extraction, woodworking machinery Key Features: — Polyurethane (PU) construction — resists abrasion from wood dust and chip-laden airflow, extending service life — 3,000 mm length — provides sufficient reach between machine extraction points and ducting or mobile extractors — Flexible design — accommodates movement and routing around machinery without kinking or restricting airflow — Heavy-duty industrial specification — built to withstand continuous workshop use rather than light-duty or domestic application — Woodworking-specific suitability — handles the particle sizes and extraction velocities typical of sawing, routing, and sanding operationsIn Stock -
This 152 mm diameter flexible extraction hose is constructed from ester-based polyurethane reinforced with a copper-coated steel spiral, giving it exceptional abrasion resistance and the mechanical durability required for dynamic, high-movement applications. The constant wall thickness of 0.40 mm ensures consistent airflow characteristics along the full 6.0 m length. Axial compressibility of approximately 5:1 reduces storage volume and simplifies transport without compromising the hose's structural integrity when extended. The PU-coated spiral increases bending cycle tolerance, making this hose particularly well suited to extraction arms, mobile equipment, and other installations where repeated flexing is unavoidable. The hose is compliant with RoHS (halogen-free and phthalate-free) and REACH Regulation 1907/2006. Earthing of the steel spiral allows electrical bonding where required. Electrical resistance of 10² Ohm/m is certified to ISO 8031 and satisfies the ATEX Directives 94/9/EC and 99/92/EC, making the hose suitable for use in potentially explosive atmospheres. Applications: Woodworking dust extraction, vapour extraction, small industrial cleaning, suction plant installations Key Features: — 152 mm internal diameter, 6.0 m length — suits standard industrial extraction ports without modification and provides a practical working reach — Ester-based polyurethane construction — delivers superior abrasion resistance compared with PVC alternatives, extending service life in particulate-laden airstreams — Copper-coated steel spiral reinforcement — maintains bore geometry under suction without kinking or collapsing — PU-coated spiral — increases the number of bending cycles the hose can sustain, reducing premature fatigue failure in dynamic applications — Constant wall thickness of 0.40 mm — ensures uniform airflow resistance and structural consistency across the full hose length — Axial compressibility approximately 5:1 — reduces storage footprint and transport costs significantly when the hose is not in use — Halogen-free and phthalate-free — RoHS compliant — meets current environmental and workplace safety legislation without requiring material substitution — REACH Regulation 1907/2006 compliant — confirms the hose is free from substances of very high concern, supporting responsible procurement — Electrical resistance 10² Ohm/m to ISO 8031 — provides a verified, standardised measure of static dissipation for safe use in industrial environments — ATEX Directives 94/9/EC and 99/92/EC compatible when earthed — qualifies the hose for use in Zone-classified potentially explosive atmospheres when the steel spiral is bonded — Operating temperature range −40°C to +90°C (125°C short-term) — covers cold store environments through to elevated-temperature extraction duties without material degradationIn Stock -
A 3.0 m length of heavy-duty PU flexible dust extraction hose suitable for connection to woodworking machinery. The abrasion-resistant construction withstands the continuous passage of wood dust, chippings, and fine particulate without degrading prematurely. Applications: dust extraction, woodworking machinery connection Key Features: — 3,000 mm nominal length — sufficient reach for most fixed and mobile machine installations without the need for joining — Polyurethane (PU) construction — resists abrasion from wood dust and chippings, maintaining integrity over extended service life — Flexible design — accommodates bends and routing around machine bases and cabinetry without kinking — Heavy-duty wall thickness — retains cross-section under suction, ensuring consistent airflow and extraction performance — Suitable for woodworking applications — compatible with dust and chipping extraction on saws, planers, spindle moulders, and similar machineryIn Stock -
This 180 mm diameter flexible extraction hose is supplied in a 6.0 m length and constructed from ester-based polyurethane reinforced with a copper-coated steel spiral. The constant wall thickness of 0.40 mm delivers consistent performance across the full length, whilst the PU-coated spiral extends service life in dynamic applications by tolerating repeated bending cycles without fatigue. The hose is axially compressible at a ratio of approximately 5:1, reducing storage volume and lowering transport costs — a practical consideration when stocking multiple lengths. Its abrasion resistance makes it well suited to the continuous particulate flows typical of woodworking dust extraction. The steel spiral can be earthed to render the hose electrically bonded, with an electrical resistance of 10² Ohm/m in accordance with ISO 8031 and the ATEX Directives 94/9/EC and 99/92/EC. The material is halogen-free in conformity with RoHS, phthalate-free, and compliant with REACH Regulation (EC) 1907/2006. Operating temperature range is -40°C to +90°C, with short-term exposure tolerance to +125°C. Applications: Woodworking dust extraction, vapour extraction, small industrial cleaning, suction plant ducting Key Features: — 180 mm diameter, 6.0 m length — suits standard dust extraction inlet sizes with sufficient reach for fixed and semi-fixed installations — Ester-based polyurethane construction — provides superior abrasion resistance compared to standard PVC hose, extending service life in particulate-laden airflows — Copper-coated steel spiral reinforcement — maintains circular cross-section under suction and withstands mechanical stress during handling — PU-coated spiral — tolerates repeated bending cycles, making the hose suitable for dynamic and articulated extraction arms — Constant wall thickness of 0.40 mm — ensures uniform airflow performance and structural consistency along the full hose length — Axial compressibility ratio of approximately 5:1 — reduces storage footprint and transport costs when stocking multiple lengths — Earthable steel spiral — electrical resistance 10² Ohm/m to ISO 8031 — enables safe use in potentially explosive atmospheres in compliance with ATEX Directives 94/9/EC and 99/92/EC — Halogen-free and phthalate-free materials — compliant with RoHS and REACH Regulation (EC) 1907/2006, supporting safe use and regulatory compliance — Operating temperature range -40°C to +90°C (short-term +125°C) — suitable for year-round outdoor installation and proximity to heat-generating machineryIn Stock -
This 10-metre length of 203 mm diameter flexible polyurethane hose is suited to dust extraction, CNC router installations, and light industrial suction applications. The PU construction offers resistance to abrasion and collapse, making it appropriate for continuous-duty extraction of wood dust, vapours, and fine particulate. Applications: Dust extraction, CNC router installations, vapour extraction, small industrial cleaning, suction plant connections Key Features: — 203 mm internal diameter — compatible with standard industrial dust extraction ductwork and CNC router extraction ports — Polyurethane (PU) construction — resists abrasion, flexing fatigue, and light chemical exposure in woodworking environments — 10-metre supplied length — sufficient for most single-machine extraction runs without jointing — Flexible wall construction — accommodates routing around machinery and obstructions without rigid ducting — Vapour and fume rated — suitable for extracting not only dust but also light vapours from finishing processes — Collapse-resistant profile — maintains airflow under suction without kinking or flatteningIn Stock -
This 203 mm diameter flexible PU ducting hose is supplied in a 6.0 m length and is constructed from ester-based polyurethane reinforced with a copper-coated steel spiral. The constant wall thickness of 0.40 mm ensures consistent airflow performance across the full length. The hose is axially compressible at a ratio of approximately 5:1, reducing storage and transport volume considerably. The PU-coated spiral permits repeated bending cycles without compromising structural integrity, making it well suited to dynamic extraction installations where the hose is regularly repositioned. The steel spiral can be electrically bonded by earthing, giving an electrical resistance of 10² Ohm/m in accordance with ISO 8031 and the ATEX Directives 94/9/EC and 99/92/EC. The material is halogen-free in conformance with RoHS, phthalate-free, and compliant with REACH Regulation 1907/2006. Operating temperature range is -40°C to +90°C, with short-term tolerance up to +125°C. Applications: dust extraction, vapour extraction, small industrial cleaning, suction plant ducting Key Features: — 203 mm diameter, 6.0 m length — suits standard industrial extraction ports without modification or adapters — Ester-based polyurethane construction — provides strong resistance to abrasion and mechanical wear in demanding workshop environments — Copper-coated steel spiral reinforcement — maintains hose geometry under suction and resists collapse across the full length — Constant wall thickness of 0.40 mm — ensures uniform airflow and structural consistency throughout — 5:1 axial compression ratio — reduces storage and shipping volume significantly, lowering handling costs — PU-coated spiral — allows repeated bending cycles without degradation, suitable for dynamic or frequently repositioned installations — Earthable steel spiral — electrical resistance 10² Ohm/m to ISO 8031 — meets ATEX Directives 94/9/EC and 99/92/EC for use in potentially explosive atmospheres — Halogen-free and RoHS compliant — safe for use in environments with restricted material specifications — Phthalate-free construction — compliant with REACH Regulation 1907/2006 for health and regulatory requirements — Operating range -40°C to +90°C, short-term +125°C — suitable for extraction of warm air, light vapours, and use in cold store or outdoor installationsIn Stock -
A 3.0 m length of heavy-duty industrial PU flexible hose, designed specifically for dust extraction on woodworking machines. The polyurethane construction offers strong abrasion resistance, making it suitable for continuous use in demanding workshop environments. Applications: dust extraction, woodworking machinery Key Features: — Polyurethane (PU) construction — resists abrasion from wood dust and chip particles, extending service life in continuous use — 3,000 mm usable length — sufficient reach to connect extraction points without additional joins or reducers — Flexible design — accommodates movement and awkward routing between machine and extraction unit — Industrial-grade specification — rated for workshop use rather than light-duty or domestic extraction applications — Woodworking-specific suitability — materials and flexibility chosen to handle the particulate types common in timber processingIn Stock£120.00£144.00As low as £122.40 -
This 254 mm diameter polyurethane flexible ducting is supplied in 6.0 m lengths and is engineered for demanding dust extraction, shavings conveyance, and industrial suction applications. The ester-based PU construction, reinforced with a copper-coated steel spiral, delivers consistent wall thickness of 0.40 mm throughout its length. The duct is axially compressible at a ratio of approximately 5:1, reducing storage footprint and transport costs without compromising structural integrity. The PU-coated spiral extends bending cycle life, making this ducting well suited to dynamic installations where the hose is regularly repositioned. Compliance with RoHS, REACH Regulation 1907/2006, and the ATEX Directives 94/9/EC and 99/92/EC is standard. Electrical bonding is achieved by earthing the steel spiral, with a resistance of 10² Ohm/m measured to ISO 8031. Applications: dust extraction, shavings extraction, vapour extraction, small industrial cleaning, industrial suction plants Key Features: — 254 mm internal diameter, 6.0 m length — suits standard industrial dust extraction ports and provides a practical run length without intermediate joins — Ester-based polyurethane construction — resists abrasion and degradation in continuous shavings and dust conveyance duty — Copper-coated steel spiral reinforcement — maintains bore profile under suction and physical load whilst allowing controlled flexing — Constant wall thickness of 0.40 mm — ensures uniform flow characteristics and predictable mechanical behaviour along the full length — 5:1 axial compression ratio — reduces storage and transport volume significantly, lowering handling costs — PU-coated spiral — extends bending cycle life, making the duct suitable for dynamic applications where frequent repositioning is required — Electrical resistance of 10² Ohm/m to ISO 8031 — meets ATEX Directive requirements when earthed via the steel spiral, permitting use in potentially explosive atmospheres — Halogen-free and phthalate-free construction — compliant with RoHS and REACH Regulation 1907/2006, suitable for regulated production environments — Operating temperature range of -40°C to +90°C (short-term peak +125°C) — covers the full range of typical woodworking and light industrial extraction conditionsIn Stock -
6.0m Length of 508 mm [20""] diameter PU flexible hose for dust extraction, shavings, vapours, small industrial cleaning and suction plants. Technical Features: Ester based Polyurethane duct reinforced with a steel spiral copper coated. Constant wall thickness of 0,40mm. Properties: Very light and flexible, axially compressible (about 5:1) for easy handling and costs saving in stocking and transporting. The PU-coated spiral allows more bending sessions, thus the duct has good mechanical properties and it is especially suitable for dynamic applications.Resistant to abrasion. Halogens free conform to RoHS and phthalates free. Standards: It can be made electrically bonded by earthing the steel spiral. (For further info regarding Electrical Resistance: The electrical resistance R 102 Ohm/m is according to ISO 8031 - ATEX Directive 94/4/EC and 99/92/EC). REACH Regulation (1907/2006) Temperature Range: -40°C+90°C (+125°C short time)Lead Time: 26 Days -
A 3.0 m length of heavy-duty industrial PU flexible hose for dust extraction. Constructed from abrasion-resistant polyurethane, it is particularly suited to the demands of woodworking environments where fine dust and chip extraction is continuous. Applications: dust extraction, woodworking machinery connections Key Features: — 3,000 mm length — sufficient reach between machine outlet and extraction unit without additional joins — Polyurethane (PU) construction — resists abrasion from wood dust and chip particles, extending service life — Flexible design — allows routing around fixed machinery and through confined workshop spaces — Industrial-grade specification — rated for continuous duty in production environments, not light trade use — Woodworking-specific suitability — bore and wall thickness appropriate for the dust and chip volumes generated by woodworking machinesIn Stock -
A 3.0 m length of heavy-duty industrial PU flexible hose for dust extraction. Constructed from abrasion-resistant polyurethane, it is particularly well suited to the demands of woodworking environments where chip and dust-laden airflow is continuous. Applications: dust extraction, woodworking machinery Key Features: — 3,000 mm length — sufficient reach between machine and extraction unit without the need for couplings — Polyurethane (PU) construction — resists abrasion from wood chips and dust particles, extending service life — Flexible design — accommodates movement and awkward routing around machinery — Heavy-duty industrial grade — built to withstand continuous use in production workshop environments — Woodworking-specific suitability — rated for the particle types and airflow conditions typical of timber processingIn Stock -
10mtr length of PU 76mm diameter flexible hose for Woodworking industry, cnc router, dust extraction, vapours, small industrial cleaning and suction plants Technical Features: Ester based Polyurethane duct reinforced with a steel spiral copper coated. Constant wall thickness of 0,40mm. Properties: Very light and flexible, axially compressible (about 5:1) for easy handling and costs saving in stocking and transporting. The PU-coated spiral allows more bending sessions, thus the duct has good mechanical properties and it is especially suitable for dynamic applications.Resistant to abrasion. Halogens free conform to RoHS and phthalates free. Standards: It can be made electrically bonded by earthing the steel spiral. (For further info regarding Electrical Resistance: The electrical resistance R 102 Ohm/m is according to ISO 8031 - ATEX Directive 94/4/EC and 99/92/EC). REACH Regulation (1907/2006) Temperature Range: -40°C+90°C (+125°C short time) Application: Woodworking industry, dust extraction, vapours, small industrial cleaning and suction plantsIn Stock -
A 3.0 m length of heavy-duty industrial PU flexible dust extraction hose, constructed for continuous use on woodworking machines. The polyurethane construction provides strong resistance to abrasion, making it well suited to the demands of timber dust and chip extraction in a production environment. Applications: dust extraction, woodworking machine connections, chip extraction Key Features: — 3,000 mm length — sufficient reach for most workshop extraction runs without joining — reduces the need for additional couplings or adaptations — Polyurethane (PU) construction — inherently resistant to abrasion from timber dust and chips — extends service life compared to standard PVC hose — Flexible design — allows routing around machinery and obstructions — simplifies installation in confined workshop layouts — Heavy-duty industrial grade — rated for continuous extraction duty — suitable for production environments rather than light intermittent use — Woodworking-specific suitability — material and construction matched to timber extraction conditions — minimises risk of premature wear or collapse under suctionIn Stock -
This 80 mm diameter flexible PU ducting hose is supplied in a 6.0 m length and is designed for dust extraction, shavings, and vapour extraction duties across a wide range of workshop and industrial environments. The ester-based polyurethane construction, reinforced with a copper-coated steel spiral, delivers consistent wall thickness of 0.40 mm and strong resistance to abrasion — making it well suited to the demanding extraction conditions found in joinery and woodworking applications. The hose is axially compressible at a ratio of approximately 5:1, reducing storage volume and simplifying transport without compromising performance in use. The PU-coated spiral increases bending cycles, giving the duct good mechanical durability in dynamic extraction setups where repeated movement and flexing are unavoidable. The hose operates across a temperature range of -40°C to +90°C, with short-term tolerance to +125°C. It is halogen-free and phthalate-free in accordance with RoHS, and complies with REACH Regulation 1907/2006. Electrical bonding is achievable by earthing the steel spiral; electrical resistance is rated at 10² Ohm/m per ISO 8031, meeting ATEX Directives 94/9/EC and 99/92/EC. Applications: dust extraction, shavings extraction, vapour extraction, small industrial cleaning, industrial suction plants Key Features: — 80 mm internal diameter, 6.0 m length — ready to install in standard workshop dust extraction configurations without modification — Ester-based polyurethane construction — provides strong resistance to abrasion and mechanical wear in continuous extraction use — Copper-coated steel spiral reinforcement — maintains hose geometry under suction pressure whilst allowing controlled flexibility — Constant wall thickness of 0.40 mm — ensures uniform flow characteristics and consistent structural integrity throughout the hose length — Axially compressible at approximately 5:1 ratio — reduces storage and transport volume significantly, lowering handling and logistics costs — PU-coated spiral — increases the number of bending cycles the hose can sustain, extending service life in dynamic applications — Operating range of -40°C to +90°C, with short-term tolerance to +125°C — suitable for extraction duties involving elevated temperatures, including some machining and finishing processes — Halogen-free and phthalate-free; RoHS and REACH compliant — meets current environmental and materials regulations for use in European manufacturing environments — Earthable steel spiral for electrical bonding — allows the hose to be made electrically conductive, reducing static build-up risk in extraction systems — Electrical resistance rated at 10² Ohm/m per ISO 8031 — meets ATEX Directives 94/9/EC and 99/92/EC for use in potentially explosive atmospheresIn Stock -
A 3.0 m length of heavy-duty industrial PU flexible hose designed for dust extraction on woodworking machinery. The polyurethane construction offers strong abrasion resistance, making it well suited to the continuous movement and particulate volumes typical of professional workshop use. Applications: dust extraction, woodworking machinery Key Features: — 3.0 m length — sufficient reach for most fixed and mobile woodworking machine installations — Polyurethane (PU) construction — resists abrasion and wear from wood chip and dust particulate over extended use — Flexible design — accommodates movement and positioning adjustments without kinking or restricting airflow — Industrial-grade wall thickness — maintains structural integrity under the suction pressures of workshop dust extraction systems — Woodworking-specific specification — suited to the abrasive and fibrous nature of wood dust and shavingsIn Stock -
6.0m Length of 51 mm diameter PU flexible hose for dust extraction, shavings, vapours, small industrial cleaning and suction plants. Technical Features: Ester based Polyurethane duct reinforced with a steel spiral copper coated. Constant wall thickness of 0,40mm. Properties: Very light and flexible, axially compressible (about 5:1) for easy handling and costs saving in stocking and transporting. The PU-coated spiral allows more bending sessions, thus the duct has good mechanical properties and it is especially suitable for dynamic applications.Resistant to abrasion. Halogens free conform to RoHS and phthalates free. Standards: It can be made electrically bonded by earthing the steel spiral. (For further info regarding Electrical Resistance: The electrical resistance R 102 Ohm/m is according to ISO 8031 - ATEX Directive 94/4/EC and 99/92/EC). REACH Regulation (1907/2006) Temperature Range: -40°C+90°C (+125°C short time)In Stock -
MAXVAC Airhose Ducting is made from ultra tough and endurable can be attached to the outlet of the Dustblocker DB650. This is great for creating positive or negative pressure areas or simply to channel air extraction along a specific route to or away from the machine. The MAXVAC Airhose flexible ducting hose can be used in many industrial air movement applications. These lightweight hoses are made from PVC vinyl coated polyester fabric and has been reinforced with a spring steel wire helix for added strength when flexed. Each section of blue flex duct is constructed with a protective external wear-strip. The protective wear-strip provides an added layer of protection from dragging and scraping the hose material on the ground. 5mtrs x 150mm Also available in other sizes, call us if your size isn't listed or you require a custom size.Lead Time: 15 Days£98.00£117.60As low as £103.49
