Veneer Presses
(23 Products)
Veneer presses are used for the laminating various materials such as veneer, laminate, aluminium or compsites to sheet materials or doors. We have a large range of sizes for different applications. They have a strong welded structure with single or multiple moving plattens that closes and apply a surface pressure whilst the material is bonded.
Veneer presses are available in different tonnage thrust to give correct surface area pressure. The amount of specific area pressure required depends on materials being used.
In larger volume production our presses can be incorporated into a through feed production line. Modern presses have PLC computer controls giving simpler calculation of pressure needed, avoiding over pressing and ultimately damage to work and press. Visit our London showroom for the best prices, stock and experts to help you.
-
IBL hydraulic presses are manufactured to customer specification, with no standard configurations — every press is engineered to suit the application, the material, and the production requirement. The weld-free steel ring frame is central to this approach, eliminating structural weak points and ensuring the frame maintains its integrity under sustained pressing loads. Platens are machined from solid steel and drilled to accommodate oil, water, or steam heating circuits, giving precise and consistent temperature distribution across the pressing surface. Platen dimensions range from 1,000 × 1,000 mm up to 3,000 × 10,000 mm, with configurations available from single-opening to 50-opening daylight stacks. Key Features: — Weld-free steel ring frame — eliminates structural weak points and maintains dimensional integrity under continuous pressing loads — Solid steel drilled platens with internal heating channels — supports oil, water, or steam heating for consistent temperature distribution across the pressing surface — Platen dimensions from 1,000 × 1,000 mm to 3,000 × 10,000 mm — accommodates a wide range of panel and component sizes within a single press specification — One to 50 opening configurations — scalable daylight capacity to match production volume and batch size requirements — Welded or cast steel hydraulic cylinders with chrome-plated pistons — robust construction with surface-hardened pistons for extended service life and reliable sealing — Front-loading configuration — straightforward material handling and integration into linear production layouts — Control board included as standard — press arrives ready for connection and operation without the need for separate control specificationLead Time: 102 Days£ Enquire -
Flame cut RING-FRAME HYDRAULIC PRESS - SIDE LOADING - MOD. ""IBNLead Time: 102 Days£ Enquire -
- Platen dimensions 3000 x 1300mm (opt.2500mm)
- No of platens 2
- No of daylights 1
Lead Time: 102 Days£ Enquire -
The P series are hot or cold presses with automatic loading, pressing and unloading of the panels. Thanks to years of experience in designing and developing continuous presses for the wood industry, ITALPRESSE now offers a huge range of models with specific features designed to meet different production requirements for the wood, plastics and metal-working industries. The most common application involves gluing a coating (veneer, lamina, paper, melamine, PVC, etc.) onto a substratum (MDF, hardboard, plywood, hollow panels, blockwood, etc.). This method is used to make panels for furniture, walls, floors, doors, etc. The basic configuration of the pressing line is comprised of a feed belt, an automatic press and a discharge deck. This configuration can be completed with numerous optionals, such as glue spreaders, polishers, automatic feeders, disk, roller or belt conveyors, automatic assembling stations, panel turners and stackers. Lines with various degrees of automation can be supplied right up to fully automatic lines that do not require direct intervention by the operator. Presses come in various sizes and with various powers/pressures, with closing from above or below, and longitudinal or transversal infeed. They can be configured at will thanks to a large number of optional devices that can be used to adapt the press to your personal requirements. High manufacturing accuracy is guaranteed by superior-quality mechanical components and numerous NC machining processes. Features: * Weld free steel ring frame, CNC machined * Available standard platen dimensions:: mm. 2500 x 1400 mm. 2500 x 1900 mm. 3000 x 1400 mm. 3000 x 1900 mm. 3300 x 1400 mm. 3300 x 1900 * Opening between platens mm. 140 * Top-down platen stroke * Specific pressure Kg/cmq. 5-7 * Pressure cylinders diameter mm. 100 * Movement cylinders * Cylinder stroke mm. 140 * Adjustable pressure gauge * Automatic pressure recovery * Adjustable opening * Fast closing with slow-down for pressing * Torsion rods for platen parallelism and flatness control * Cylinder insulating steel platesLead Time: 102 Days£ Enquire -
ITALPRESSE have introduced the new V8 through feed presses with automatic loading, it brings economical, efficient pressing to medium sized workshops. No need to manually load the press opening: the panels are laid-up on a preparation belt outside the press, and then automatically driven onto the press platen by a simple touch of a button. The main benefits of this solution are: - reduced cycle times - increased productivity - easy operating with Touch Screen Control - no need to lift & push the panels in & out Features: A) AUTOMATIC LOADING BELT - Tough - Made of synthetic nylon reinforced cloth - Loading speed synchronized with press belt - Loading automatically controlled by photocells B) AUTOMATIC PRESS - Platen dimensions mm. 3000 x 1300 [other sizes available for example, 2500 x 1300mm, 3200 x 1600mm, 3500 x 1300mm] - Platens no. 2 - Daylights no. 1 - Cylinders stroke and opening mm. 300 - Upstroke movement of the platens - Platens heated by oil from integral electric boiler -N.8 cylinders of 70 mm - Total thrust 120 tons - Hydraulic pump from German HAwe Company - Automatic reset of the pressure - Motorised loading mylar belt into the press - Self lubricating guides, diagonally - Racks & pinion for parallel platen movement - TOUCH SCREEN TS 500 * Electronic flatness control device Computerize interface to control all press functions model ""TS 500"" : - 5,7 colour ""TOUCH SCREEN"" monitor for the setting, storing end monitoring all cycle parameters - timer for automatic opening of the press at the end of the pressing cycle - digital temperature control - digital pressure control with automatic control of the laminating pressure according to operator entered panel dimensions - daily/weekly timer for automatic start-up and shutdown of the heating unit - automatic pressure commutation for the panel dimensions - fault diagnostic system - memory for 200 working program - Foot control for forward-backward belt mouvement and for automatic cycle star - CE SAFETY STANDARDS: - Safety rope around loading belt - Grids on the left and right press sides - Safety bolts to lock the mobile platen for maintenance EXCLUSION OF LEFT AND RIGHT ROWS OF CYLINDERS C) FREE ROLLER UNLOADING TABLE Placed back press side With these new models, ITALPRESSE is offering an affordable solution for automatic loading and unloading of the classical hot press. The line can be built up to have full laminating cell including scissor lift, brushing, glue spreading.Lead Time: 102 Days£ Enquire -
- Platen dimensions 3800 x 1600mm
- No of platens 2
- No of daylights 1
Lead Time: 102 Days£ Enquire -
- Platen dimensions 4200 x 1600mm
- No of platens 2
- No of daylights 1
Lead Time: 60 Days£ Enquire -
- Platen dimensions 5000x1600mm
- Heated platens 2
- Openings 1 nr
Lead Time: 102 Days£ Enquire -
HEATING PLATENS - Cold platen dimensions mm. 2500x1300 - Platens nr. 2 - Openings nr. 1 - Opening daylight mm. 400 - Press platens with high resistance chipboard covered with galvanized steel sheets OLEODYNAMIC CYLINDERS: - Maximum thrust ton. 70 - Thrust cylinders nr. 4 - Thrust piston diameter mm. 85 - Cylinder stroke mm. 400 - Press cylinders made of special seamless tubes of thick steel. - Welding done by a robot machine to control all welding parameters. - CNC machining allows minimum tolerance for precision movement and long life of the seals. - Pistons are machined out of a steel rod, CNC ground, polished and thickness chromed. OLEODYNAMIC SYSTEM - Compact oleodynamic power unit made in Germany (make: HAWE) - Dual pump for high flow-low pressure and low flow-high pressure steps - Automatic re-set of oleodynamic pressure - Oleodynamic power Kw. 2,1 - Up-stroking movement of bottom platen CONSTRUCTION DETAILS - Welded beams press frame, calculated with high structural safety factor - Frame, moving platen and fixed platen machined on CNC heavy milling machine. - The moving platen is a fabricated weldment of high thickness steel beams to withstand the pressing tonnage with minimal deflection. - Self-lubricating guides diagonally placed, for flatness control - Rack and pinion system assures constant parallelism of the moving platen during closing and opening OPERATOR INTERFACE - Key on/off switch - Light-up pushbutton for emergency resetting (Run) COMPUTERIZED INTERFACE TO CONTROL ALL PRESS FUNCTIONS MODEL "TS 400" With the following features: o 4.3" colour "TOUCH-SCREEN" monitor for the setting, storing and monitoring all cycle parametersLead Time: 102 Days£ Enquire -
- Platen dimensions 2500 x 1300mm
- No of platens 2
- No of daylights 1
Lead Time: 102 Days£ Enquire -
- Platen dimensions 2500 x 1300mm
- No of platens 2
- No of daylights 1
Lead Time: 102 Days£ Enquire -
- Platen dimensions 2500 x 1300mm
- No of platens 5
- No of daylights 4
Lead Time: 102 Days£ Enquire -
- Platen dimensions 2500 x 1300mm
- No of platens 5
- No of daylights 4
Lead Time: 102 Days£ Enquire -
- Platen dimensions 3000 x 1300mm
- No of platens 2
- No of daylights 1
Lead Time: 65 Days£ Enquire -
- Platen dimensions 3000 x 1300mm
- No of platens 6
- No of daylights 5
Lead Time: 102 Days£ Enquire -
- Platen dimensions 2500 x 1300mm
- No of platens 5
- No of daylights 4
Lead Time: 102 Days£ Enquire -
- Platen dimensions 2500 x 1300mm
- No of platens 5
- No of daylights 4
Lead Time: 102 Days£ Enquire -
- Platen dimensions 3000 x 1300mm
- No of platens 2
- No of daylights 1
Lead Time: 102 Days£ Enquire -
- Platen dimensions 3200 x 1600mm
- No of platens 2
- No of daylights 1
Lead Time: 102 Days£ Enquire -
- Platen dimensions 3500 x 1300mm
- No of platens 2
- No of daylights 1
Lead Time: 102 Days£ Enquire -
- Platen dimensions 3800 x 1600mm
- No of platens 2
- No of daylights 1
Lead Time: 102 Days£ Enquire -
- Platen dimensions 4200 x 1400mm
- No of platens 2
- No of daylights 1
Lead Time: 102 Days£ Enquire -
- Platen dimensions 3500 x 1300mm
- No of platens 2
- No of daylights 1
Lead Time: 102 Days£ Enquire
