Dust Extractors
(66 Products)
We supply a number of dust extractor brands that offer a number of different features. The iTech dust extraction range is a great way to install an affordable and safe dust extraction system in your workshop.
We also supply dust extractors from Ardesia, DCS, PJ & Record which also offer some great products including filters and dust collection bags.
Looking for something else?
Want to find a specific type of dust extractor? We sell cyclone dust extractors, enclosed and fine dust extractors if you are looking to find something more specific for your workshop. We also provide bag dust extraction systems that offer an economical dust cleaning solution for your workspace.
-
iTECH Pipe Sucker - this handy add on attachment is a perfect tool for any workshop extraction system, simply plug it in and getting sucking! can be used on either portable extractors or intergrated extraction systems, and fits easily onto 100mm Controls woodwaste and prevent dust from sweeping .Lead Time: 187 DaysList £70.80£55.00Inc Vat £66.00 -
- Motor: 1.2 kW
- Voltage: 230V
- Flow Rate: 3.05 m?/min (53 l/sec)
Lead Time: 118 Days£120.00£144.00 -
Fine Filter Dust Cartridge is suitable for many popular mobile extractors. Used in place of a cloth bag to give finer filtration and a larger surface area, the cartridge increases extraction efficiency and reduces the amount of dust re-entering the atmosphere. Can be used with all popular 500mm Diameter extractors - For operations that exclusively produce fine dust and may pose an explosion risk - sanding machines, work with mdf etc - customers should check the relevant COSHH requirements of their woodworking equipment as dust extraction equipment with totally enclosed filter systems and explosion relief may be required. Filtration to 1 micron Internal mounting size 500mm Diameter Filter area Packing size 56 x 56 x 68cm, 11.5kgLead Time: 3 Days -
Fine Filter Dust Cartridge Air is suitable to upgrade many popular mobile extractors AND larger units due to its increased length and surface area. Used in place of a cloth bag it gives finer filtration and a larger surface area, the cartridge increases extraction efficiency and reduces the amount of dust re-entering the atmosphere. With a 50cm diameter and 100cm height. Can be used with all popular 500mm Diameter extractors . To ensure efficiency and performance the filter includes an internal filter cleaner. Rotate the handle after each use, moving the internal paddle to clean the inside of the filter. . For operations that exclusively produce fine dust and may pose an explosion risk - sanding machines, work with mdf etc - customers should check the relevant COSHH requirements of their woodworking equipment as dust extraction equipment with totally enclosed filter systems and explosion relief may be required. Filtration to 1 micron Internal mounting size 500mm Diameter Packing size 56 x 56 x 110cm, 17kgIn StockList £288.00£210.00Inc Vat £252.00 -
- Fan diameter 300mm
- Inlet diameter 125
- Inlet holes 2 x 100mm
Lead Time: 19 DaysList £396.00£295.00Inc Vat £354.00 -
- Motor power 2.2 kw 3.0 hp 230v 1ph
- Plug required 16amp
- Fan diameter 300mm
Lead Time: 3 DaysList £540.00£390.00Inc Vat £468.00 -
- Inlet diameter: 150mm
- Bag diameter: 500mm
- Collection Capacity: 177 ltrs
Lead Time: 187 Days£ Enquire -
- Motor 2.2kW (3hp)
- Supply 230v (16amp)
- Air flow 3900m3/hour
Lead Time: 5 Days£450.00£540.00 -
- Fan diameter 300mm
- Inlet diameter 125
- Inlet holes 2 x 100mm
Lead Time: 19 DaysList £578.40£460.00Inc Vat £552.00 -
- Motor power 3hp
- Voltage 240v (16a)
- Fan diameter 330mm
Lead Time: 19 DaysList £1,080.00£599.00Inc Vat £718.80 -
The new high quality mobile extractor in the iTECH range complete with fine filter cartridge - The new high quality mobile extractor in the iTECH range- This is a more rugged extractor designed for small workshops. The industrial construction and quality finish sets it apart from others. It is big enough to handle a 310mm planer or many other workshop machines. The cyclonic filtration system works by separating the waste from the airflow, diverting the waste into the plastic collecting bag whilst the filtered air passes through the bag. Technical Specifications: Motor power 2hp Voltage 240v (16a) Fan diameter 300mm Suction capacity 3000m3/h Inlet size 3 x 100mm Total assembled Dimensions 985 x 560 x H1750mm Sound pressure level in dB(A) <85 Packaging detail 110 x 65 x 122cm Weight 64kg Includes 1 x ITWMDCCFF Spare collection bags ITWMABS3_5BAGLead Time: 19 DaysList £780.00£599.00Inc Vat £718.80 -
- Suction hood diameter: 150mm
- Bag diameter: 500mm
- Capacity: 177 ltrs
Lead Time: 187 Days£ Enquire -
- Motor power] [3hp]
- NB - Will require 16A supply
- [Fan diameter] [300mm]
Lead Time: 3 DaysList £872.40£655.00Inc Vat £786.00 -
SPECIAL OFFER : iTECH DC002S with Fine Dust Cartridge Filters + 25 Plastic Dust Bags included. iTECH DC002 2 Bag Dust Extractor is a rugged extractor designed for small workshops. The industrial construction and quality finish sets it apart from others. The cyclone filtration system works by separating the waste from the airflow, diverting the waste into the collecting bag. The base is fitted with castors for mobility around the workshop. The 150 mm inlet is fitted with a triple branch 100mm adaptor, allowing connection to either one or two machines. Supplied complete with 1x 3m 100mm diameter. hose. Air filter canister for the iTech DC001 and DC002 dust extractors. Upgrade your iTech dust extractor to filter out fine dust caused by: Sanding, Sawing, Routing etc... Filtration to 1 micron. Internal mounting size 500mm Diameter, Easily slips on with air tight film seal. [Motor power] [3hp] [Fan diameter] [300mm] [Inlet diameter] [150] [Inlet holes] [3 x 100mm] [Air capacity] [1490cfm] [Bag diameter] [500mm] [Packing size] [1220 x 580 x 580cm] [Noise level] 89dB Filter : Filtration to 1 micron Internal mounting size 500mm Diameter Filter area Packing size 56 x 56 x 68cm, 11.5kg INCLUDED : ITWMDC002_3 ITWMDCCFF PJBAG42Lead Time: 3 DaysList £872.40£655.00Inc Vat £786.00 -
- Suction hood diameter: 200mm
- Bag diameter: 500mm
- Air flow: 5000 M3 / Hour
Lead Time: 187 Days£ Enquire -
- Motor power 3hp
- Voltage 400v (16a)
- Fan diameter 330mm
Lead Time: 19 DaysList £1,440.00£849.00Inc Vat £1,018.80 -
P&J PJ234 two bag dust extractor 415V 4hp A static two bag unit for extracting larger shavings such as soft and hardwoods, Machines come standard with inlet at top and motor facing downwards, should you require this to be changed so that the motor is at the top of the unit and inlet is facing down please specify. Number of collection bags 2 Motor power 4hp Voltage 400V Power Supply 3Ph. +Earth Fuse 20Amp Inlet diameter 200mm Air flow 4500m3/hr Overall dimension 1925 x 2750 x 800mm Weight 130kgs on pallet Options External use Steel bins 240V motor 860Lead Time: 24 Days£ Enquire -
P&J PJ334 three bag dust extractor 400V 4HP - Machines come standard with inlet at top and motor facing downwards, should you require this to be changed so that the motor is at the top of the unit and inlet is facing down please specify. A static three bag unit for extracting larger shavings such as soft and hardwoods, Number of collection bags 3 Motor power 4HP Voltage 400V Inlet diameter 200mm Air flow 4394m/hr Overall dimension 2438x711x2768mm Weight 170kgs Machines come standard with inlet at top and motor facing downwards, should you require this to be changed so that the motor is at the top of the unit and inlet is facing down please specify. A static three bag unit for extracting larger shavings such as soft and hardwoods, Options External use Steel bins 240VLead Time: 24 Days£ Enquire -
- Number of collection bags 3
- Motor power 4kw (5.5HP)
- Voltage 400V
Lead Time: 24 Days£ Enquire -
Designed to extract waste from smaller fine dust emitting machinery, such as that produced from various sanders, linishers, grinders, polishers and band saws etc. Powerful - able to serve multiple point extraction simultaneously Low height of 770mm, makes unit ideal to fit under work benches Extremely compact size, recirculatory with high efficiency, low noise level and safety features make this unit particularly suitable for use in educational / training environments and small workshops where space is at a premium An integral face mounted viewable filter gauge ensures the user can see that your extraction unit is working effectively to protect you from the hazardous substances controlled, enabling you to maintain the filter in good condition and advising when it needs to be cleaned or replaced Premium quality super-glazed filters provide an extra smooth surface offering unsurpassed particle collection efficiency and improved long-term performance. Other filter media available for specialist applications Option for a H13 or H14 grade HEPA filter add-on for enhanced air filtration performance Various inlet duct point options to sides or rear make connection practical, Ideal for standing flush to a rear wall for optimising space if the side inlet locations are utilised For added convenience and flexibility in the smaller workshop there is an optional mobile kit available Can be supplied with a reinforced top for use as a support base for small machines that it serves or as a workspace, this optional extra should be requested at the time of ordering Option to be electrically interlocked to the equipment served (specify interlock starter / control panel when ordering) PERFORMANCE Designed to give a maximum airflow of 1900 m?/hr at the inlet, before allowing for the resistance of the ducting, please consult the fan curve to identify the predicted airflow at the resistance pressure loss for your system duct layout. NOISE LEVEL Typically 79 dB(A) measured at 2 metres for average acoustic conditions INLET Inlets diameters available: 63mm, 80mm, 100mm, 125mm & 150mm these can be installed on any combination of the four inlet points located 1 x left, 1 x right and 2 x rear, however simultaneous extraction can only be provided for the combinations A to G below. If additional inlets are required shut off valves must be present on each duct run to close off inlets that exceed the maximum simultaneous extraction capability. If inlet diameter and quantity is not specified on your order it will be supplied with 1 x 150 mm as standard, A) 1 x 150mm (STANDARD) B) 1 x 125mm + 1 x 80mm or 63mm C) 2 x 100mm D) 1 x 100mm + 2 x 80mm E) 1 x 100mm + 3 x 63mm F) 3 x 80mm G) 4 x 63mm 240V single PhaseLead Time: 24 Days£2,995.00£3,594.00 -
Designed to extract waste from smaller fine dust emitting machinery, such as that produced from various sanders, linishers, grinders, polishers and band saws etc. Powerful - able to serve multiple point extraction simultaneously Low height of 760mm, makes unit ideal to fit under work benches Extremely compact size, recirculatory with high efficiency, low noise level and safety features make this unit particularly suitable for use in educational / training environments and small workshops where space is at a premium An integral face mounted viewable filter gauge ensures the user can see that your extraction unit is working effectively to protect you from the hazardous substances controlled, enabling you to maintain the filter in good condition and advising when it needs to be cleaned or replaced Premium quality super-glazed filters provide an extra smooth surface offering unsurpassed particle collection efficiency and improved long-term performance. Other filter media available for specialist applications Various inlet duct point options to side/s or rear make connection practical, Ideal for standing flush to a rear wall for optimising space if the side inlet locations are utilised For added convenience and flexibility in the smaller workshop there is an optional mobile kit available Can be supplied with a reinforced top for use as a support base for small machines that it serves or as a workspace, this optional extra should be requested at the time of ordering Option to be electrically interlocked to the equipment served (specify interlock starter / control panel when ordering) PERFORMANCE Designed to give a maximum airflow of 1580 m?/hr at the inlet, before allowing for the resistance of the ducting, please consult the fan curve to identify the predicted airflow at the resistance pressure loss for your system duct layout. NOISE LEVEL Typically 78 dB(A) measured at 2 metres for average acoustic conditions INLET Inlets diameters available: 63mm, 80mm, 100mm, 125mm & 150mm these can be installed on any combination of the four inlet points located 1 x left, 1 x right and 2 x rear, however simultaneous extraction can only be provided for the combinations A to G below. If additional inlets are required shut off valves must be present on each duct run to close off inlets that exceed the maximum simultaneous extraction capability. If inlet diameter and quantity is not specified on your order it will be supplied with 1 x 150 mm as standard A) 1 x 150mm (STANDARD) B) 1 x 125mm + 1 x 80mm or 63mm C) 2 x 100mm D) 1 x 100mm + 2 x 80mm E) 1 x 100mm + 3 x 63mm F) 3 x 80mm G) 4 x 63mm 240v Single PhaseLead Time: 24 Days£2,995.00£3,594.00 -
Designed to extract waste from smaller fine dust emitting machinery, such as that produced from various sanders, linishers, grinders, polishers and band saws etc. Powerful - able to serve multiple point extraction simultaneously Low height of 760mm, makes unit ideal to fit under work benches Extremely compact size, recirculatory with high efficiency, low noise level and safety features make this unit particularly suitable for use in educational / training environments and small workshops where space is at a premium An integral face mounted viewable filter gauge ensures the user can see that your extraction unit is working effectively to protect you from the hazardous substances controlled, enabling you to maintain the filter in good condition and advising when it needs to be cleaned or replaced Premium quality super-glazed filters provide an extra smooth surface offering unsurpassed particle collection efficiency and improved long-term performance. Other filter media available for specialist applications Various inlet duct point options to side/s or rear make connection practical, Ideal for standing flush to a rear wall for optimising space if the side inlet locations are utilised For added convenience and flexibility in the smaller workshop there is an optional mobile kit available Can be supplied with a reinforced top for use as a support base for small machines that it serves or as a workspace, this optional extra should be requested at the time of ordering Option to be electrically interlocked to the equipment served (specify interlock starter / control panel when ordering) PERFORMANCE Designed to give a maximum airflow of 1800 m?/hr at the inlet, before allowing for the resistance of the ducting, please consult the fan curve to identify the predicted airflow at the resistance pressure loss for your system duct layout. NOISE LEVEL Typically 77.5 dB(A) measured at 2 metres for average acoustic conditions INLET Inlets diameters available: 63mm, 80mm, 100mm, 125mm & 150mm these can be installed on any combination of the four inlet points located 1 x left, 1 x right and 2 x rear, however simultaneous extraction can only be provided for the combinations A to G below. If additional inlets are required shut off valves must be present on each duct run to close off inlets that exceed the maximum simultaneous extraction capability. If inlet diameter and quantity is not specified on your order it will be supplied with 1 x 150 mm as standard, A) 1 x 150mm (STANDARD) B) 1 x 125mm + 1 x 80mm or 63mm C) 2 x 100mm D) 1 x 100mm + 2 x 80mm E) 1 x 100mm + 3 x 63mm F) 3 x 80mm G) 4 x 63mm Inlet Location Options 1x Left (STANDARD)2x Rear 1x Right 240v Single PhaseLead Time: 24 Days£2,995.00£3,594.00 -
Designed to extract waste from smaller fine dust emitting machinery, such as that produced from various sanders, linishers, grinders, polishers and band saws etc. Powerful - able to serve multiple point extraction simultaneously Extremely compact size, recirculatory with high efficiency, low noise level and safety features make this unit particularly suitable for use in educational / training environments and small workshops where space is at a premium An integral face mounted viewable filter gauge ensures the user can see that your extraction unit is working effectively to protect you from the hazardous substances controlled, enabling you to maintain the filter in good condition and advising when it needs to be cleaned or replaced Premium quality super-glazed filters provide an extra smooth surface offering unsurpassed particle collection efficiency and improved long-term performance. Other filter media available for specialist applications Various inlet duct point options to side/s or rear make connection practical. Ideal for standing flush to a rear wall for optimising space if the side inlet locations are utilised Can be supplied with a reinforced top for use as a support base for small machines that it serves or as a workspace, this optional extra should be requested at the time of ordering Option to be electrically interlocked to the equipment served (specify interlock starter when ordering) PERFORMANCE Designed to give a maximum airflow of 1780 m?/hr at the inlet, before allowing for the resistance of the ducting, please consult the fan curve to identify the predicted airflow at the resistance pressure loss for your system duct layout. NOISE LEVEL Typically 73.94 dB(A) measured at 2 metres for average acoustic conditions INLET Inlet Location Options 1x Left (STANDARD)2x Rear 1x Right. Inlets diameters available: 63mm, 80mm, 100mm, 125mm & 150mm these can be installed on any combination of the four inlet points located 1 x left, 1 x right and 2 x rear, however simultaneous extraction can only be provided for the combinations A to G below. If additional inlets are required shut off valves must be present on each duct run to close off inlets that exceed the maximum simultaneous extraction capability. If inlet diameter and quantity is not specified on your order it will be supplied with 1 x 150 mm as standard. A) 1 x 150mm (STANDARD) B) 1 x 125mm + 1 x 80mm or 63mm C) 2 x 100mm D) 1 x 100mm + 2 x 80mm E) 1 x 100mm + 3 x 63mm F) 3 x 80mm G) 4 x 63mm 240v Single PhaseLead Time: 24 Days£2,995.00£3,594.00 -
- Number of collection bins 1
- Motor power 3kw 4hp
- Voltage 400v
Lead Time: 24 Days£ Enquire -
- Type of waste collector Bin
- Capacity of collection bin 8cu.ft
- Motor power 1.5 kw 2.0 hp
Lead Time: 24 Days£ Enquire -
For use with Circular/Table Saws in smaller preparation rooms by utilising floor space normally used by an existing run-off table to the front of the Saw Powerful extraction suitable for most modern saws Extremely compact size, recirculatory with high efficiency, low noise level and safety features make this unit particularly suitable for use in educational / training environments and small workshops where space is at a premium An integral face mounted viewable filter gauge ensures the user can see that your extraction unit is working effectively to protect you from the hazardous substances controlled, enabling you to maintain the filter in good condition and advising when it needs to be cleaned or replaced Premium quality super-glazed filters provide an extra smooth surface offering unsurpassed particle collection efficiency and improved long-term performance. Other filter media available for specialist applications Option to be electrically interlocked to the equipment served (specify interlock starter / control panel when ordering) PERFORMANCE Designed to give a maximum airflow of 1722 m?/hr at the inlet, before allowing for the resistance of the ducting, please consult the fan curve to identify the predicted airflow at the resistance pressure loss for your system duct layout. NOISE LEVEL Typically 78 dB(A) measured at 2 metres for average acoustic conditions INLET Inlets diameters available: 63mm, 80mm, 100mm, 125mm & 150mm these can be installed on any combination of the four inlet points located 1 x left, 1 x right and 2 x rear, however simultaneous extraction can only be provided for the combinations A to G below. If additional inlets are required shut off valves must be present on each duct run to close off inlets that exceed the maximum simultaneous extraction capability. If inlet diameter and quantity is not specified on your order it will be supplied with 1 x 150 mm as standard, A) 1 x 150mm (STANDARD) B) 1 x 125mm + 1 x 80mm or 63mm C) 2 x 100mm D) 1 x 100mm + 2 x 80mm E) 1 x 100mm + 3 x 63mm F) 3 x 80mm G) 4 x 63mm 240v Single PhaseLead Time: 24 Days£3,495.00£4,194.00 -
- Number of collection bags 2
- Motor power 2.2kw [3.0hp]
- Voltage Specify When ordering
Lead Time: 24 Days£ Enquire -
- Modular design allowing for all types of Spraying Application
- 1.1m to 6.6m widths ex stock with specials in 7 days
- Half the fixings of other booths = Quicker Installation
Lead Time: 15 Days£3,750.00£4,500.00 -
P&J PJ6310 6 bag extraction unit 10hp Number of collection bags 6 Motor power 10HP Voltage 415V Air 9295m/hr Inlet diameter 355mm Overall dimensions 4268x762x2768mm Weight 286kgs Machines come standard with inlet at top and motor facing downwards, should you require this to be changed so that the motor is at the top of the unit and inlet is facing down please specify. A large capacity extractor for soft and hardwood shavings only not for the use of fine dust. Suitable for larger shavings such as hard and softwood, Options Steel binsLead Time: 24 Days£ Enquire -
- Modular design allowing for all types of Spraying Application
- 1.1m to 6.6m widths ex stock with specials in 7 days
- Half the fixings of other booths = Quicker Installation
Lead Time: 14 Days£4,144.00£4,972.80 -
Designed to extract waste from smaller fine dust emitting machinery, such as that produced from various sanders, linishers, grinders, polishers and band saws etc. Powerful - able to serve multiple point extraction simultaneously Low height of 770mm, makes unit ideal to fit under work benches Extremely compact size, recirculatory with high efficiency, low noise level and safety features make this unit particularly suitable for use in educational / training environments and small workshops where space is at a premium An integral face mounted viewable filter gauge ensures the user can see that your extraction unit is working effectively to protect you from the hazardous substances controlled, enabling you to maintain the filter in good condition and advising when it needs to be cleaned or replaced Premium quality super-glazed filters provide an extra smooth surface offering unsurpassed particle collection efficiency and improved long-term performance. Other filter media available for specialist applications Including a H13 grade HEPA filter add-on for enhanced air filtration performance, Option for H14 HEPA Filter at point of order Various inlet duct point options to sides or rear make connection practical, Ideal for standing flush to a rear wall for optimising space if the side inlet locations are utilised For added convenience and flexibility in the smaller workshop there is an optional mobile kit available Can be supplied with a reinforced top for use as a support base for small machines that it serves or as a workspace, this optional extra should be requested at the time of ordering Option to be electrically interlocked to the equipment served (specify interlock starter / control panel when ordering) PERFORMANCE Designed to give a maximum airflow of 1900 m?/hr at the inlet, before allowing for the resistance of the ducting, please consult the fan curve to identify the predicted airflow at the resistance pressure loss for your system duct layout. NOISE LEVEL Typically 79 dB(A) measured at 2 metres for average acoustic conditions INLET Inlets diameters available: 63mm, 80mm, 100mm, 125mm & 150mm these can be installed on any combination of the four inlet points located 1 x left, 1 x right and 2 x rear, however simultaneous extraction can only be provided for the combinations A to G below. If additional inlets are required shut off valves must be present on each duct run to close off inlets that exceed the maximum simultaneous extraction capability. If inlet diameter and quantity is not specified on your order it will be supplied with 1 x 150 mm as standard, A) 1 x 150mm (STANDARD) B) 1 x 125mm + 1 x 80mm or 63mm C) 2 x 100mm D) 1 x 100mm + 2 x 80mm E) 1 x 100mm + 3 x 63mm F) 3 x 80mm G) 4 x 63mm 240v Single PhaseLead Time: 24 Days£4,295.00£5,154.00
-
- Number of collection bags 3
- Motor power 4kw [5.5hp]
- Inlet diameter 250 mm
Lead Time: 24 Days£ Enquire -
- Modular design allowing for all types of Spraying Application
- 1.1m to 6.6m widths ex stock with specials in 7 days
- Half the fixings of other booths = Quicker Installation
Lead Time: 14 Days£5,613.00£6,735.60 -
- Number of collection bags 2
- Motor power 3kw [3.0hp]
- Voltage 230v
Lead Time: 24 Days£5,900.00£7,080.00 -
- Motor power 7.5 kw 10hp
- No of collection bags 4
- No of filters 16
Lead Time: 24 Days£ Enquire
